GGM Gastro GLSPME44 Professional Glasswasher

A. GENERAL INFORMATION

Before installing the appliance, read operation and maintenance instructions carefully. Wrong installation and part changing may damage the product or may cause injury on people. These are not in our company's responsibility to damage the appliance intentionally, negligence, detriments because of disobeying instructions and regulations, wrong connections. Unauthorized intervention to appliance invalidates the warranty.

1. This instruction manual should be kept in a safe place for future reference.
2. Installation should be made in accordance with ordinances and security rules of that country by a qualified service personnel.
3. This appliance has to be used by trained person.
4. Please turn off the appliance immediately in the event of malfunction or failure. The appliance should be repaired only by authorized service personnel. Please demand original spare part.

A1. PRODUCT DESCRIPTION

The Professional Glasswasher, that provides high efficiency, has been designed to be used in industrial kitchens.

A2. TECHNICAL INFORMATION

A3. TRANSPORTATION

This appliance can not be moved by hand from area to area. It must be moved on pallet with forklift truck.

A4. UNPACKING

Please unpack the package according to the security codes and ordinances of current country and get rid from the pack. Parts which contacts with food are produced by stainless steel. All plastic parts are marked by material's symbol.

Please check that all the parts of appliance had come completely and if they are damaged or not during the shipping.

B. INSTALLATION

Please place the product to straight and sturdy ground, please take necessary steps against possibility of overturn.

Technician who will serve for installation and service for the appliance must be professional on this subject and must have installation and service licenses by the company.

Connection to Electric Power Supply must be done by authorized person.

Please be sure that the voltage connected to appliance must be equal with the voltage which is on appliance's label.

⚠ This appliance must be connected to an earthed outlet in accordance with safety rules and standards.

Appliance's earthing must be connected to earthing line on panel which is nearest to electric installation.

Connection to the main fuse and leak current fuse must be done in accordance with the current regulations.

C. SAFETY INSTRUCTIONS

• ⚠ Do not use the appliance in insufficient lighted place.
• ⚠ Do not touch the moving attachments while the appliance operates.
• Do not install the appliance in the presence of flammable or explosive materials.
• Do not operate the appliance when the machine is empty.
• ⚠ Do not load so less or more than appliance's capacity.
• ⚠ Do not attempt to use the appliance without suitable protective equipments.
• ⚠ Because of any reason if there is a fire or flame flare where the appliance is used, turn off all gas valves and electric contactor switch quickly and use fire extinguisher. Never use water to extinguish the fire.
• All the damages because of not having earthing connection will not be on warranty.
• ⚠ Do not wash the decorated glasses. Prevent silver wares to contact with the other metals.

D. OPERATION

Control Panel:

A: Appliance ON lamp
B: Water heated lamp
C: Washing lamp
D: Water getting /rinsing
E: Evacuation lamp
F: Evacuation position
G: Appliance OFF position
H: Water inlet
I: Washing program

Operating:

• Change the water that is in water tank 3 times in a day.
• Before putting the glasses in to the appliance, make prewash with cold or warm water without using any detergent.
• Turn on water source valve.
• Plug in the appliance.
• In order to take off any residue that remain in storage or pipes, operate the appliance when it is empty.
• In order to operate the appliance switch to ‘Water Inlet' position. Water Inlet lamp signals. It means power is given to glasswasher, water is given and heated.
• When heating process completed, water heated lamp signals.
• Place the dirty glasses to the baskets.
• Close the lid and switch to washing program. Involved indicator lamp signals and washing process starts.
• Washing process; for hot water and washing with detergent (minimum 55°C), for rinsing with hot water (minimum 75°C).
• In order to stop washing, open the lid when it is at ‘Washing' position.
• After the washing is completed, the machine will automatically rinse with hot water for 15 seconds, then rinse with cold water for 15 seconds and automatically drain excess water.
• Take off the basket that includes washed glasses.

E. CLEANING & MAINTENANCE

CLEANING AND MAINTENANCE AFTER EVERY USE

• Always turn off the appliance and disconnect from the power supply before cleaning.
• Clean all surfaces of the appliance with hot soapy water after every use. Rinse and dry with a wet cloth.
• Clean the control panel with soft moisty cloth, if necessary use ineffective detergent.
• Do not use abrasive cleaning chemicals as these can leave harmful residues.
• Do not clean the appliance by spraying water directly, otherwise electric motor may get damaged.

PERIODIC CLEANING AND MAINTENANCE

• Maintenance should be done by qualified person.
• Clean the limes of the burner, inner surface of the washing tank and water pipes once or twice in a year.
• Clean the limes with using rinsing and washing nozzles once in a month by using vinegar or lime remover.
• Clean the filters in the appliance once in a week. After cleaning be sure that thumbscrew is compressed.
• Clean the appliance's fountains once in 15 days by detaching it.

F. TROUBLESHOOTING

If glasswashing is not done at suitable quality or if any function of security doesn't work, do not use the appliance.

If these problems are still going on, contact with authorized services.

G. SPARE PART LIST- EXPLODING DRAWING

This section features an exploded view diagram illustrating the various components of the glasswasher. The diagram is accompanied by a detailed parts list on subsequent pages, referencing each part by a number.

NAME OF THE PRODUCT: 1100-MS

H. ELECTRIC CIRCUIT SCHEMA

This section provides the electric circuit schema for the glasswasher. It details the wiring and connections between components such as the main power input (L1, L2, L3, N, PE), control switches (P1, S1), contactors (C1, C2, C3, C4), relays (ZR1, ZR2, TR1, TR2), motors (M1, M2), heating elements (R1, R2), and safety components (F1, F2). The diagram uses color-coded wires and component labels for clarity.