Game of Bricks Light Kit for LEGO Solomon R. Guggenheim Museum 21035
Instruction Manual
Thank You
Thank you for purchasing this product. To achieve the perfect hidden-line effect, Game of Bricks uses thin aviation-grade wire with high tension and pressure tolerance. Due to its thin nature, be careful not to cut through it, as it may be susceptible to shearing during installation. Always be careful not to press brick pieces down on the wire.
Let's Get Started
If you encounter any challenges, please feel free to reach out via support@gameofbricks.eu. Game of Bricks offers 2 years of free light kit maintenance.
Step 1 (Bag 1)
This step involves preparing and placing the first set of lights and wires within the LEGO model. The image shows a bag labeled '1' containing LED strips and a small circuit board, along with wires. Subsequent images demonstrate how to carefully insert these components into specific sections of the partially built Solomon R. Guggenheim Museum model, ensuring the wires are routed correctly without being pinched.
Step 2 (Bag 2)
This step continues the installation process with components from Bag 2. The images show the placement of additional LED strips and wires into different parts of the museum structure. Attention is given to routing the wires through internal spaces and connecting them to the existing setup, ensuring they are concealed within the model.
Step 3 (Bag 3)
This stage focuses on integrating the lights from Bag 3. The process involves carefully feeding wires and attaching LED strips to various levels and sections of the museum. The images illustrate the precise placement of these components to illuminate specific architectural features of the model.
Step 4 (Bag 4)
In Step 4, the lights from Bag 4 are installed. This typically involves illuminating the iconic circular ramps of the Guggenheim Museum. The images show the LED strips being carefully attached to the curved surfaces, with wires being routed discreetly.
Step 5 (Bag 5)
The final installation step involves connecting the main power source. Bag 5 contains the necessary components, likely including a USB cable and a battery box. The images show the final connections being made, integrating all the LED strips and preparing the model for power. The completed model is shown illuminated, showcasing the effect of the light kit.
Final Connection
Connect the light kit to the battery box to complete the installation. If you wish to use an alternative power source, ensure its maximum voltage does not exceed 6V.
