Crystal Quest 1500 GPD Reverse Osmosis System

System Key

• [A] 1,500 GPD Reverse Osmosis Unit
• [B] 550 Gallon Atmospheric Storage Tank
• [C] Reboosterizer Pump
• [D] 12 GPM Water Sterilization Unit
• [E] 2.0 Remineralizer Tank

System Diagram Description

This diagram illustrates the flow and arrangement of a Crystal Quest water filtration system. Incoming water enters the system and passes through the 1,500 GPD Reverse Osmosis Unit [A]. From there, it flows into the 550 Gallon Atmospheric Storage Tank [B]. A Reboosterizer Pump [C] then moves the water to the 12 GPM Water Sterilization Unit [D]. Finally, the treated water passes through the 2.0 Remineralizer Tank [E] before becoming outgoing water. A floor drain is located beneath the Reverse Osmosis Unit [A].

Component Details:

• [A] 1,500 GPD Reverse Osmosis Unit: This unit is designed to filter water at a rate of 1,500 gallons per day. It is depicted as a vertical assembly with multiple filter housings.
• [B] 550 Gallon Atmospheric Storage Tank: A large, cylindrical tank used to store purified water.
• [C] Reboosterizer Pump: A pump responsible for boosting water pressure within the system.
• [D] 12 GPM Water Sterilization Unit: This unit sterilizes water at a flow rate of 12 gallons per minute, likely using UV technology.
• [E] 2.0 Remineralizer Tank: A tank that adds beneficial minerals back into the purified water.

Product Specifications

Dimension Key: L = Length, W = Width, H = Height, D = Diameter

Dimensions are in inches. Drawing is not to scale.

Drawing Information

Date: 10/24/2017

Title: David Johnson

Size: C

Drawing Number: (Not specified)

Revision: (Not specified)

Scale: 1:20

Sheet: 1 of 1

Proprietary Notice

The information contained in this drawing is the sole property of Crystal Quest. Any and all reproduction in part or as a whole without the written permission of Crystal Quest is prohibited.