Crystal Quest 30,000 GPD Commercial High Flow Reverse Osmosis System
Product SKU: CQE-CO-02034
General Specifications
Specification | Value |
---|---|
Product SKU | CQE-CO-02034 |
Gallons Per Day* | 30,000 GPD |
Gallons Per Minute | 20 GPM |
Approx. Weight | 500 lbs. |
Recovery** | 33% - 50% |
Operating Pressure | 150 psi |
Maximum TDS | 2,000 ppm |
Chlorine Tolerance | <1 ppm |
Turbidity | 1 NTU |
Mechanical Specifications
Specification | Value |
---|---|
Motor HP | 3 |
Voltage (Volts) | 110/220 |
Hertz | 50/60 |
Connection Specifications
Connection Type | Size |
---|---|
Feed Connection | 2" |
Product Connection | 1.5" |
Waste Connection | 1" |
Membrane/Pre-Treatment Specifications
The system includes two types of vessels for membrane and pre-treatment:
- A 4" x 40" vessel with a capacity of 14 elements.
- A 9" x 48" vessel, designated for backwash, operated manually.
System Diagrams and Flow Key
Front View Description
The front view of the 30,000 GPD RO System displays the primary operational components:
- Flowmeters: L - Permeate, R - Concentrate.
- System Gages: Labeled 1 through 4, indicating: 1. Pre-Filtration In, 2. Pre-Filtration Out, 3. Pump Pressure, 4. Waste Pressure.
- Needle Valve for flow adjustment.
- Control Panel for system interface.
- 3 HP Pump/Motor unit.
- System Inlet port.
The diagram illustrates the flow paths as defined by the Flow Key.
Top View Description
The top view illustrates the core reverse osmosis membrane bank and associated plumbing. It clearly marks the outgoing lines:
- Product Line (Permeate)
- Waste (Concentrate) outlet.
Additionally, a line for Pre-Filtration Backwash is indicated.
Flow Key
The flow key defines the visual representation of different fluid paths:
- Influent Water Flow: [dashed blue line]
- Filtered Water Flow: [dashed purple line]
- Waste Water Flow: [dashed black line]
- Backwash Flow: [dashed red line]
Dimension Key
The dimension key explains the notation used for system measurements:
- L: Length [arrow]
- W: Width [arrow]
- H: Height [arrow]
- D: Diameter [arrow]
All dimensions are provided in inches. The drawing is not to scale.
Comments and Drawing Information
Comments
- GPD (Gallons Per Day) is measured per 24-hour cycle.
- The Recovery Ratio can range from 33% - 50%, and may extend up to 75% if specific system projections are provided.
Proprietary Notice: The information contained within this drawing is the sole property of Crystal Quest. Any reproduction, in part or as a whole, without the written permission of Crystal Quest is strictly prohibited.
Drawing Details
Attribute | Value |
---|---|
Date | 02/04/2019 |
Drawn By | Dustin |
Title | 30,000 GPD COMMERCIAL HIGH FLOW REVERSE OSMOSIS SYSTEM |
Size | C |
DWG. NO. | 1 |
Rev # | A |
Scale | 1:20 |
Weight | Not specified |
Sheet | 1 of 1 |