Uline S-14306 Safety Toe Covers

Safety Instructions

Please read these instructions carefully before using this CSA approved product.

WARNING! This product is designed to offer occasional protection against injury to the wearer's toes due to crushing or falling objects. It is not a substitute for full safety footwear. No protection is claimed against: high voltage electricity, cutting, piercing or perforation. Not suitable for climbing ladders.

This product can be used only for temporary toe protection and is to be used in conjunction with fully covered non-protective footwear.
This product is not to be used for heavy duty protection (i.e., construction, heavy lifting, etc.).
This product is not to be used as a replacement for permanent foot protection required in every day job use.

NOTE: It is important to check the fit of the product over your normal footwear to ensure the toe cap covers all of your toes. No other type of protection is claimed or intended.

Intended for use on flat, hard, walking surfaces with no tripping hazards. A full risk assessment needs to be carried out to ensure that the use of this type of overshoe provides an appropriate level of protection.

Impact protection provided is 125 joules.

Fitting and Sizing

This product will only perform correctly if used with conventionally shaped footwear items (those with shallow rounded toes).
This product is not to be used with open toe or open backed footwear.
This product is not to be used with pointed toe shoes where the toes of the user are not sufficiently covered by the protective toe cap.
This product is not to be worn with footwear where the heel height exceeds 60 mm as measured from the ground up to the top of the sole at the breast of the heel.
This product should be tight fitting to keep it in place.
If the steel toe cap can be felt pressing on the top of the shoe, then the sole thickness is too great to offer protection and a larger size should be obtained.

Wear Life

Inspect for excessive wear to the sole and upper prior to use.
WARNING! If damaged, the product must be replaced. If the upper has a tear or nick, or if the sole tread has been worn away, or if the steel toe is loose, DO NOT USE. Replace with a new pair.
Occasionally, product should be cleaned with mild soap and water. Allow to dry naturally, away from direct heat.
WARNING! Never use caustic or corrosive cleaning agents.

Storage

May be stored in the clear plastic ziplock bag provided. Shelf life unused is 10 years.

NOTE: The suitability of Safety Toe Covers for specific applications must be determined and tested by the purchaser. Régence Footwear Inc. and its distributors assume no responsibility for the suitability of an end user's selection for a specific application.

Always remember that no item of personal protective equipment can provide full protection and that care must be taken while carrying out risk-related activity. This product can be used only for occasional toe protection in conjunction with additional fully covered footwear.

Manufacturer Information

Manufactured by: Chaussures Régence Inc. 655 rue de l'Argon Quebec, QC G2N 2G7 website: www.wilkuro.com e-mail: info@wilkuro.com ISO 9001-2008 Registered Firm

	ULINE S-22220 Impact Sport Earmuffs: Instructions and Maintenance Comprehensive guide for ULINE S-22220 Impact Sport Earmuffs, covering setup, usage, cleaning, storage, and battery replacement for optimal noise reduction and hearing protection.
	Uline Carpet Protection Tape - Application and Warranty Guide Comprehensive guide to Uline Carpet Protection Tape, covering application instructions, testing, suitability, storage, and warranty information. Ideal for temporary carpet protection during renovations, painting, and high-traffic periods.
	ULINE S-17902, S-17903 Bullet Earplugs: Fitting, Attenuation, and Recommendations Detailed guide for ULINE S-17902 and S-17903 Bullet Earplugs, covering proper fitting instructions, sound attenuation data, and essential safety recommendations for effective hearing protection in noisy environments.
	ULINE Anti-Static Table Mat Installation Guide Step-by-step installation instructions for the ULINE Anti-Static Table Mat, including grounding procedures and safety notes. Covers model numbers S-12741 through S-21921.
	ULINE DEGREASER Safety Data Sheet Comprehensive Safety Data Sheet (SDS) for ULINE DEGREASER, detailing hazard identification, composition, first-aid measures, handling, storage, exposure controls, physical and chemical properties, toxicological and ecological information, transport, and regulatory data.
	Uline Cut Resistant Glove Guide: Selecting the Right Gloves A comprehensive guide from Uline on selecting cut-resistant gloves based on ANSI cut levels, typical applications, liner materials (Dyneema/HPPE and Kevlar), coating types (Polyurethane, Nitrile, Latex), gauge, and abrasion resistance. Features a product catalog with detailed specifications.
	ULINE Fiber Drum Closure Instructions and UN Certification Guide Comprehensive guide for closing ULINE Fiber Drums (Models S-7900, S-9944, S-11877, S-17005, S-17006) in compliance with DOT CFR 49 Part 178.2(c)(1). Includes steps for secure closure and details on UN performance test requirements.
	ULINE H-6697 Shower Eyewash Station Assembly Instructions Comprehensive assembly guide for the ULINE H-6697 Shower Eyewash Station. Provides step-by-step instructions, part identification, and critical assembly notes for ensuring proper installation and function, compliant with ANSI Z358.1 standards.