ULINE CUT RESISTANT GLOVE GUIDE

What ANSI Cut Level Do I Need?

Risk Level	Typical Applications
A9: Extreme Cut Hazards	• Heavy duty handling of castings and fabricated metals • Pulp and paper applications • Butcher, meat packaging
A8: Very High Cut Hazards	• Automotive manufacturing • Metal stamping • Plastic machining
A7: High Cut Hazards	• Heavy metal fabrication • Food chopping/processing • Metal fabrication
A6: Medium to Heavy Cut Hazards	• Glass handling
A5: Medium Cut Hazards	• Construction • Facilities maintenance
A4: Light to Medium Cut Hazards	• General warehouse receiving/packaging • Handling small parts, wires or cables
A3: Light Cut Hazards
A2: Light Cut Hazards

*American National Standards Institute

Which Liner Should I Use?

Feature	Dyneema®/HPPE	Kevlar®
Cut Resistant	✔️	✔️
Strength vs. Steel	15x	5x
Lightweight	✔️	✔️
Bleachable	✔️	✔️
Heat Resistant	✔️	✔️

What Coating Do I Need?

Coating	Polyurethane	Nitrile	Latex
Benefits	Flexible for dexterity and comfort	Puncture/abrasion resistant and grips when wet	Thick textured coating for best overall grip
Applications	General purpose	Oily and wet surfaces	Dry, rough surfaces

What Gauge Do I Need?

A gauge scale from 7 to 18 is presented. Lower gauge indicates heavier weight, thicker construction, and less dexterity. Higher gauge indicates lighter weight, thinner construction, and greater dexterity.

What Abrasion Level Do I Need?

An abrasion level scale from 1 to 6 is presented. Lower levels mean shorter life, while higher levels mean longer life.

Product Catalog

Description	ANSI Cut Level	ANSI Abrasion Level	Material	Palm Coating	Gauge
S-14249 Uline Dyneema®	A2	6	Dyneema®	Polyurethane	13
S-20703 Uline Durarmor™	A2	3	HPPE	Polyurethane	13
S-21574 Uline Durarmor™ Stealth	A2	6	HPPE	Polyurethane	15
S-23342 Uline Durarmor™ Grip	A2	2	HPPE	Latex	13
S-24007 Uline Diamond Flex	A3	5	Dyneema® Diamond	Polyurethane	18
S-23323 Uline Diamond	A3	4	Dyneema® Diamond	Nitrile	15
S-24006 Uline Diamond Elite	A4	5	Dyneema® Diamond	Nitrile	15
S-22779 Uline Durarmor™ Elite	A4	4	HPPE Blend	Nitrile	13
S-22780 Uline Durarmor™ Elite Plus	A6	4	HPPE Blend	Nitrile	13
S-24003 Uline Durarmor™ Max	A8	4	HPPE Blend	Nitrile	13
S-23343 Uline Gription Cut Resistant Lime or Black	A3	6	HPPE Blend	Silicone	13
S-24002 Uline Durarmor™ Ice Lime or Black	A4	4	HPPE Blend, Inner Liner: Acrylic	Nitrile	13
S-19705 Ansell HyFlex® 11-518	A2	3	Dyneema® Diamond	Polyurethane	18
S-19711 Ansell HyFlex® 11-644	A2	5	HPPE	Polyurethane	13
S-22150 MaxiFlex® 34-8743	A2	3	HPPE Blend	Nitrile	18
S-24024 MaxiFlex® 34-8443	A2	3	HPPE Blend	Nitrile	18
S-23911 MaxiCut® Ultra™ 44-3745	A3	4	HPPE Blend	Nitrile	15
S-14320 Ninja® Max	A3	4	Dyneema® Blend	Polyurethane, Nitrile	10
S-20768 Ironclad® Kong Cut 5 Knit	A3	6	HPPE Blend	Nitrile	13
S-19247 Ansell HyFlex® 74-047 Light Weight	A4	3	Dyneema® Blend	Uncoated	13
S-19248 Ansell HyFlex® 74-048 Medium Weight	A6	4	Dyneema® Blend	Uncoated	10
S-7893 Industrial Knit Kevlar®	A3	2	Kevlar®	Uncoated	7
S-9867 Uline Rubber Coated Kevlar®	A2	3	Kevlar®	Latex	10
S-16858 Uline Foam Nitrile Coated Kevlar®	A2	3	Kevlar®	Nitrile	13
S-19216 Ansell HyFlex® Lite 11-500	A2	3	Kevlar®	Nitrile	15
S-21085 Ansell HyFlex® Comfort 11-510	A2	4	Kevlar®	Nitrile	15
S-9866 PVC Dot Knit	A3	3	Kevlar®	PVC Dots	7
S-15331 Uline Super Gription Kevlar®	A3	3	Kevlar®	Latex	10
S-19706 Ansell HyFlex® Heavy Duty 11-501	A5	3	Kevlar® Blend	Nitrile	13
S-19707 Ansell HyFlex® 11-511	A4	4	Kevlar® Blend	Nitrile	13
S-22765 HexArmor® 9011	A7	4	SuperFabric®, Polyester, Cotton	Latex	10
S-22766 HexArmor® 9014	A9	4	SuperFabric®, Polyester, Cotton	Latex	10
S-18009 Steel Mesh	A9	N/A	Steel	Uncoated	N/A
S-22781 Uline HPPE A2 Sleeve Black or Gray	A2	4	HPPE	Uncoated	13
S-23996 Uline HPPE A4 Sleeve	A4	4	HPPE Blend	Uncoated	13
S-21087 Ansell HyFlex® 11-211 Sleeve	A2	4	HPPE	Uncoated	13
S-11432 Kevlar® Sleeve with Thumbhole	A3	2	Kevlar®	Uncoated	7
S-21086 Kevlar® Sleeve without Thumbhole	A3	2	Kevlar®	Uncoated	7

	ULINE Anti-Static Table Mat Installation Guide Step-by-step installation instructions for the ULINE Anti-Static Table Mat, including grounding procedures and safety notes. Covers model numbers S-12741 through S-21921.
	ULINE Fiber Drum Closure Instructions and UN Certification Guide Comprehensive guide for closing ULINE Fiber Drums (Models S-7900, S-9944, S-11877, S-17005, S-17006) in compliance with DOT CFR 49 Part 178.2(c)(1). Includes steps for secure closure and details on UN performance test requirements.
	ULINE Metal Buckles for Poly Strapping Installation Guide - S-108, S-12709, S-12928, H-12929, S-12930, S-18507 Concise instructions for using ULINE metal buckles with poly strapping. Learn the threading and tightening process for models S-108, S-12709, S-12928, H-12929, S-12930, S-18507. Essential for secure packaging applications.
	Uline Stainless Steel Drum Closure Instructions Detailed instructions for securely closing Uline stainless steel drums (models S-17353, S-17354, S-20529) using bolt ring closures and fittings, including torque specifications and important safety notes.
	ULINE S-9947, S-9948, S-17942 Plastic Pail Lid Assembly Instructions Step-by-step guide for attaching and securing ULINE plastic pail lids (models S-9947, S-9948, S-17942). Learn how to align and secure the lid using a rubber mallet, with clear instructions and tips to prevent breakage.
	ULINE Wood Crate Assembly Instructions Step-by-step assembly guide for ULINE Wood Crates (models S-9921, S-16473, S-18248), detailing tools needed and the assembly process for secure packaging.
	Uline Wax Produce Box Assembly Instructions Step-by-step assembly guide for Uline Wax Produce Boxes, models S-17644, S-17645, and S-20443.
	ULINE ACE™ Elastic Bandage: Instructions and Care Detailed instructions for applying and caring for the ULINE ACE™ Elastic Bandage, including preparation, wrapping techniques for foot/ankle, and washing guidelines.