Important Safety Information
Warning: Always shut off power to the circuit before starting installation work.
In some countries, electrical installation work may only be carried out by an authorized electrical contractor. Contact your local electricity authority for advice.
Installation in Bathrooms
The installation shall be carried out by an authorized electrical contractor. The luminaire must be permanently installed in the electric system and placed in the correct zone.
Different materials require different types of fittings. Always choose screws and plugs that are specially suited to the material.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Installation Guide
This guide provides essential steps for installing the GODMORGON LED wall lamp. Please refer to the included diagrams for detailed visual instructions.
Diagram Overview: The document includes diagrams illustrating the product dimensions, assembly steps, wiring, and mounting.
- Prepare for Installation: Ensure the power is switched off at the circuit breaker.
- Mounting Bracket: Securely attach the provided mounting bracket to the wall using appropriate screws and wall plugs suitable for your wall material.
- Electrical Connection: Connect the electrical wires to the luminaire's terminal block. Pay attention to the Live (L), Neutral (N), and Earth (?) connections as indicated by the symbols.
- Attach Luminaire: Slide or clip the GODMORGON lamp onto the mounted bracket.
- Secure Luminaire: Fasten the luminaire to the bracket using the provided screws.
- Final Check: Ensure all connections are secure and the lamp is properly installed in its designated zone.
Maximum Load Capacity
The following table details the maximum load capacity for different lengths of the GODMORGON fixture:
Length | Max. Load (English) |
---|---|
40 cm (16") | 1 kg (2.2 lb) |
60 cm (23 3/4") | 2 kg (4.4 lb) |
70 cm (8") / 80 cm (31 1/2") | 3 kg (6.6 lb) |
100 cm (39 3/4") | 4 kg (8.8 lb) |