BILLY Bookcase Assembly Instructions
⚠️ WARNING! Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided. Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.
Parts Included
- 16x Cam lock screws (Part #101351)
- 12x Dowels (Part #118331)
- 28x Screws (Part #119081)
- 6x Shelf support pins (Part #151706)
- 6x Cam locks (Part #151705)
- 5x Shelves (Part #153548)
- 16x Cam locks (Part #131372)
- 2x Wall brackets (Part #109041)
- 4x Screws for wall brackets (Part #100823)
Assembly Steps
Step 1: Prepare Panels
Insert 16 cam lock screws (101351) into the side panels. Insert 12 dowels (118331) into the top and bottom panels.
Step 2: Assemble Base Frame
Connect the bottom panel to the two side panels using 12 screws (119081).
Step 3: Attach Back Supports
Attach the two back support pieces to the side panels using 4 screws (119081).
Step 4: Attach Central Divider
Attach the central vertical divider to the bottom panel using 4 screws (119081).
Step 5: Attach Top Panel
Connect the top panel to the side panels using 2 screws (119081).
Step 6: Insert Back Panel
Slide the thin back panel into the grooves on the back of the assembled frame.
Step 7: Secure Back Panel
Secure the back panel to the frame using 6 screws (119081).
Step 8: Insert Shelf Pins and Cam Locks
Insert 6 shelf support pins (151706) into the desired holes on the inside of the side panels. Insert 6 cam locks (151705) into the designated holes on the shelves.
Step 9: Place Shelves
Place the 5 shelves (153548) onto the shelf support pins.
Step 10: Secure Shelves
Turn the cam locks (151705) on the shelves to secure them in place.
Step 11: Attach Wall Brackets
Attach the two wall brackets (109041) to the top of the assembled bookcase using 2 screws (100823) for each bracket.
Step 12: Insert Final Cam Locks
Insert 16 cam locks (131372) into the designated holes on the side panels.
Step 13: Secure to Wall
Position the bookcase against the wall. Use the wall brackets and 4 screws (100823) to securely fasten the bookcase to the wall. Ensure you use screws and plugs appropriate for your wall type. If unsure, consult a professional. [Tip: Use a level for best results.]