Energizer PPS240W01 Portable Power Station User Manual

Thank you for choosing Energizer!

Energizer products are designed to keep you powered while you're doing what you love. Whether you're climbing in the Himalaya, living in your van while you travel the world, or camping in your backyard, Energizer will keep you powered.

The purpose of this manual is to help you use the product correctly. Please read the manual carefully and follow the guidance.

ATTENTION:

• The specifications and the pictures in this manual are for reference only.
• The product is only used for emergency situations; it cannot replace the standard AC power for household appliances or digital products.
• Actual AC outlet and AC adapter would be different depending on the locations of the customer.
• Fully charge the product before using it for the first time (minimum 10 hours). The battery bar no longer flashing indicates it is fully charged.

Get To Know Your Product

1. Front

LCD Battery Display: There are 5 segments to the battery, approximating 20%-40%-60%-80%-100% capacity. As you use your product, segments will disappear from the display, indicating the remaining charge. When charging your product, you will notice a battery segment blinking at a 1-second interval status. Once your product is fully charged, all battery segments will be lit and remain solid.

Energizer Logo

Leather handle

Warm screen

Scene lamp 3W

LED Button

AC ON/OFF button

Power button/DC switch ON/OFF

Alarm

Socket solar

AC outlet 110V

DC5521

DC OUTPUT 12V

PD25W (30W Max)

12V Car charger

PC VO# Retardant

UL Logo

FC Logo

ROHS Logo

Made in China

Charging Your Product

1. Charge Through Solar Panel

MPPT Technology: With the built-in MPPT (Maximum Power Point Tracking) Technology, this product can be charged by solar panel efficiently. MPPT technology is designed to be used with wind turbines and photovoltaic (PV) solar systems to maximize power extraction under all conditions. With MPPT technology, the product can compare the output voltage of the solar panels with the battery voltage in real-time. It then finds out the best power output for charging the battery and maximizes the charging efficiency.

Instructions:

• Place your solar panel where it will get as much strong direct sunlight as possible.
• Connect the output port of the solar panel with the input port of the product to start charging. You will know the product is being charged when the LCD display indicators blink. The product is fully charged when all battery indicators stop blinking and remain solid.

Notes:

• The actual charging efficiency can vary widely depending on weather, ambient temperature, sunlight's strength, the angle that the solar panels face to the direct sunlight, and other factors.
• The maximum output voltage of the solar panel should not exceed 23.5V.
• In order to ensure solar charging efficiency, it is recommended to use solar panels with an open circuit output voltage of 10.8-23.5V. The maximum electric current can reach 3A.

2. Charge Through AC Adapter

Plug the original adapter into the machine's AC input port, and you will see the battery indicators on the screen blink.

Notes:

• The product is fully charged when all battery indicators stop blinking and remain solid. After the product is fully charged, please unplug the AC wall charger in time.
• Usually, it takes about 7 hours to fully charge the machine using the original power adapter.
• When you charge your power station by the INPUT port, the PD 100W port cannot be used for output.

3. Charge Through Your Car

• Plug the original car charger into the cigarette lighter socket of your 12V car, and then plug into the AC input port of the machine.
• The original car charger features a 10A protector tube to protect your car.
• You will know the machine is being charged when the battery indicators blink.
• Depending on your car, you may not get a full charge with this method of charging.
• If the charging voltage of your car is too low, the battery cannot be charged using this method.

Notes:

• To avoid car battery power loss, you should charge this product through your car cigarette lighter only when your car engine is started. This function is for 12V cars ONLY.
• Under-voltage protection: The power generator cannot be charged if the voltage of your car is too low.

4. Charge Through PD Charger (PD charger not included)

Plug your PD charger to the PD 45W IN/OUT port.

Using Your Product

1. Buttons

• Power button/DC switch ON/OFF: Long press the power button for 3 secs to turn the machine on. Press this button again to turn on DC function.
• AC ON/OFF button: Press the AC button to turn on the AC function. Long press the AC button to turn off the sound.
• Frequency Switch: Press the POWER/DC button and AC button simultaneously to switch the frequency of the machine.

2. LED Button

• Press the LED button to turn on the LED. The first push will turn on the bright level mode.
• Press the LED button again to change the LED mode to low-LED mode.
• Press the LED button again to activate the SOS mode.
• Press the LED button again to change the LED mode to flashing mode.
• Press the LED button again to turn the LED off.

Warning! DO NOT stare at the light directly!

3. USB Output Function

43.0 5V-3A 9V-2A 12V-1.5A

PD25W(30W Max)

When two USB-A and the USB-C port charging simultaneously, the three ports can only output 5V/5.6A in total.

4. DC Outputs

DC OUTPUT 12V

• These three DC5521 (5.5mm in diameter) 12V ports offer max 10A output current and automatically distribute max current according to the external connected devices to ensure the shortest charging time.
• Each of the DC5521 ports can be connected with a cigarette lighter (power requires no more than 120W).

Protection mode (DC outputs):

• Short circuit protection: When short-circuit occurs to the external devices, buzzer sounds ER002 to turn off DC.

Notes:

• When the product's AC, DC, and USB output simultaneously, and the total battery current is greater than 38A, after 3 minutes of operation, the product's buzzer will alarm, and the LCD screen will display the fault code E11. If the alarm continues for more than 30 seconds and has not been cleared, the product will forcibly turn off the DC output to reduce the total output current of the battery and ensure the safety of the product. When the DC output is turned off due to overload, please do not force it to turn on again by pressing the button.
• When the battery voltage is less than 11.2V, the DC output function will be forcibly closed, and it needs to be charged to release it.

5. AC Output

AC icon

• Press the power button to enter AC mode. Plug the power cable of the AC appliance into the AC outlet of the machine.
• Make sure the power of the connected AC appliance is less than 200W.

Notes:

• The LCD screen backlight would automatically turn off down 2 minutes after lighting up.
• When the machine is not working, it automatically shuts down.

Protection mode: (AC output)

• This product has undervoltage protection, overload protection, short circuit protection, and overtemperature protection. It adopts a double isolation circuit, which is safe, reliable, and efficient.
• When overload, overtemperature, or short circuit occurs, this machine will start beeping and the ER003 icon appears on the screen, and then the machine automatically shuts down to ensure safety.

Product Specifications

Error Code

Caution

• Do not short-circuit the product. To avoid short-circuiting, keep the product away from all metal objects.
• Do not heat the product, or dispose of it in fire, water, or other liquids. Keep it away from high ambient temperature. Do not expose the product to direct sunlight.
• Keep the product away from humid, dusty places.
• Do not disassemble or reassemble this product.
• Do not drop, place heavy objects on, or allow strong impact to this product.
• This product is not intended to be used by persons with reduced physical, sensory, or mental capabilities.
• Please keep this product away from children.
• Do not cover the product with towels, clothing, or other items.
• Do not overcharge this product.
• When fully charged, disconnect the product from the power source immediately.
• When charging this product, please keep it away from TV, radio, and other equipment to avoid radio wave interference.
• If you are not going to use this product for a long time, please disconnect the cable before storing it away.
• To charge some portable electronic devices, you may need to set those devices in charge mode first. Refer to the corresponding user manual of those devices for confirmation.

Sine Wave Output

Energizer power station is pure sine wave, which is compatible with AC electric appliances that work with sinusoidal waveform (power <200W). However, the product is only used for emergency situations. It cannot replace the standard DC or AC power supply for household appliances or digital products.

Package Contents

• 1 x 240Wh Portable power Station
• 1 x Power Adapter
• 1 x Cigarette Lighter Female Adapter
• 1 x Car Charger
• 1 x User Manual

Warranty

Energizer provides customers with a warranty of 12 months from the date of purchase.

Contact us

For any inquiries or comments concerning Energizer products, please send an email to energizer@iittechnology.com, and Energizer will respond to you as soon as possible.