Sky Indoor Camera CH130-UKIE: Safety, Installation, and Compliance

Important Safety and Product Information

This document provides essential safety and product information for your Sky Indoor Camera (CH130-UKIE) and Power Supply (SPB0505UK-W). Please read this leaflet completely, especially the warnings and cautions, before installing or using the product. Retain this document for future reference.

This product is exclusively for use in the UK, Channel Islands, and the Isle of Man.

? This symbol indicates it is important to consult the user instructions before using this product.

⚠ This Safety Alert symbol identifies a WARNING, CAUTION, or NOTICE concerning safe installation and use.

Warnings and Cautions

⚠ WARNING: To avoid risk of suffocation, do not leave small parts such as packaging remnants, tools, or removable items within the reach of children.

⚠ WARNING: The SPB0505UK-W power supply must not be used with other equipment.

⚠ WARNING: Your Indoor Camera is not intended for emergency use and should not be considered a replacement for a third-party emergency notification system capable of dispatching emergency services.

⚠ WARNING: Any electrical device, if used or installed improperly, has the potential for causing fire, electrical shock, personal injury, or could be lethal. To avoid these hazards, please read the following warnings and cautions:

• Only use the power supply (SPB0505UK-W) and cables supplied with your camera.
• Handle your camera and power supply carefully to avoid damage.
• Never remove the cover of your camera or power supply; there are no user-serviceable parts inside.
• Do not attempt to repair your camera or power supply. Instead, contact Sky.
• Your power supply must be installed in a mains supply wall socket that is easily accessible.
• Do not connect your power supply to the mains until you have properly connected your camera.
• Disconnect your power supply from the mains before disconnecting and reconnecting your camera.
• Ensure all electrical connections are properly made.
• Never push anything into holes, slots, or other openings in the casing of your camera or power supply.
• To ensure a free flow of air around your camera, allow at least 10cm of space around exposed faces.
• Ensure airflow is not impeded by items such as newspapers, tablecloths, or carpets.
• Do not place your camera or power supply close to sources of heat, such as a heater or direct sunlight. The ambient temperature must not exceed 45°C.
• This product is not intended for use at altitudes above 3000m.
• Allow your camera and power supply to reach room temperature before reconnecting them to the mains supply if you move them between locations.
• Do not use or store your camera or power supply in hot, cold, damp, or dusty places; they are intended for use in moderate climates.
• Do not put anything on or near your camera or power supply that might drip or spill into it.
• Never place naked flame sources, such as lighted candles, on or adjacent to your camera or power supply.
• Unplug your power supply from the mains before cleaning. Your camera and power supply typically only require a wipe with a clean, dry, lint-free cloth.

⚠️ CAUTION: This product includes wireless radio technology with restrictions for its use. Please observe the following:

• This product must be installed a minimum distance of 10cm away from users.
• This product must only be used indoors.

Wireless radio frequencies used by this product:

• Frequency band: 2400.0MHz to 2485.0MHz
• Power not exceeding: 20dBm

Your power supply operates with a 230V AC, 50Hz mains supply. When connecting and disconnecting your power supply, do so carefully at the mains wall socket. If you are in any doubt about anything relating to the mains supply, consult a competent electrician.

ℹ️ NOTICE: Avoid putting your camera and power supply on or near natural wood, antiques, or any other delicate surface that may be easily damaged by heat.

Installation and Mounting Instructions

The supplied metal plate and mounting tape can be used to mount your camera on a vertical surface.

What's in the box:

• Indoor Camera
• USB cable
• Power adapter
• Wall Mounting Plate
• Mounting tape

Your Camera Components:

Front view:

• Lens
• Microphone

Back view:

• USB output (for use with the Sensor Bridge)
• Power cable

Bottom view:

• Set-up button

Getting your camera up and ready:

Your Indoor Camera can easily be placed on a flat surface like a worktop or shelf. Alternatively, you can mount the camera on a vertical surface using the provided metal wall plate and mounting tape.

1. Position your camera no higher than two metres (2m) from the ground.
2. Remove the paper film on the mounting tape and stick it to the wall.
3. Place the metal wall plate onto the mounting tape and press firmly to secure it.
4. Attach the camera to the magnetic mounting plate. Finally, adjust the camera's field of view using the Sky Protect app.

This camera is designed to be used only with the supplied 1.8-metre cable.

Recycling - Make a Difference with Sky

Give your old Sky products a new life. Sky products contain materials that can be recovered, reused, or recycled, reducing the need for new materials. Any parts we cannot reuse will be recycled.

The ♺ (crossed out wheeled bin symbol) marks products that should not be disposed of with general household waste but must be collected separately for reuse or recycling. Improper disposal of electrical products risks releasing hazardous substances that could harm human health or the environment.

Recycling your old product with Sky is easy:

1. Send it to us for free, and we'll ensure it gets reused or recycled. For more information, UK customers can visit sky.com/returns or contact Sky via the app.
2. Take your old product to your nearest public recycling centre, which can be found by contacting your local authority.

Power Supply Information (EU Regulation 2019/1782)

• Manufacturer's name: Sky CP Limited
• Manufacturer's commercial registration number: UK09513259
• Manufacturer's address: Grant Way, TW7 5QD, United Kingdom
• Model identifier: SPB0505UK-W
• Input voltage: 100-240V
• Input AC frequency: 50-60Hz
• Output voltage: 5.0V DC
• Output current: 1.0A
• Output power: 5.0W
• Average active efficiency: 75.8%
• No-load power consumption: 0.05W

Declarations of Conformity

UK Declaration of Conformity

Manufacturer: Sky CP Limited, Grant Way, TW7 5QD, United Kingdom

Object of the Declaration:

• Name: Smart Camera
• Model: CH130-UKIE-G01
• Type: Indoor Camera
• Includes: CH130-UKIE Camera; SPB0505UK-W power supply; SA302 USB Cable; Mounting Kit; User Documents

Issued under the sole responsibility of the manufacturer, the object of the declaration described above is in conformity with the relevant statutory requirements:

• Radio Equipment Regulations 2017 (SI 2017 No. 1206)
• 6(1)(a) EN IEC 62368-1:2020+A11:2020 (Safety requirements)
• 6(1)(a) EN IEC 62368-3:2020 (Safety aspects for DC power transfer)
• 6(1)(a) EN 50665:2017 (Human exposure restrictions for electromagnetic fields)
• 6(1)(a) EN 62311:2008 (Human exposure restrictions for electromagnetic fields)
• 6(1)(b) EN 55032:2015+A11:2020 (Electromagnetic compatibility - Emission requirements)
• 6(1)(b) EN 55035:2017 (Electromagnetic compatibility - Immunity requirements)
• 6(1)(b) EN 301 489-1 V2.2.3 (EMC standard for radio equipment - Common technical requirements)
• 6(1)(b) EN 301 489-17 V3.2.4 (EMC standard for radio equipment - Broadband Data Transmission Systems)
• 6(2) EN 300 328 V2.2.2 (Wideband transmission systems - 2.4 GHz band)

The Ecodesign for Energy-Related Products Regulations 2010 (SI 2010 No. 2617) and related EU/UK regulations for external power supplies and energy consumption.

Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 (SI 2012 No. 3032) and EN IEC 63000:2018.

Declaration Details:

For and on behalf of Sky CP Limited

Giles Harvey, MD Group Supply Chain

23 January 2023, Head Office

EU Declaration of Conformity

Manufacturer: Sky CP Limited, Grant Way, TW7 5QD, United Kingdom

Object of the Declaration:

• Name: Smart Camera
• Model: CH130-UKIE-G01
• Type: Indoor Camera
• Includes: CH130-UKIE Camera; SPB0505UK-W power supply; SA302 USB Cable; Mounting Kit; User Documents

Issued under the sole responsibility of the manufacturer, the object of the declaration described above is in conformity with the relevant Union harmonisation legislation:

• RED 2014/53/EU
• 3.1(a) EN IEC 62368-1:2020+A11:2020 (Safety requirements)
• 3.1(a) EN IEC 62368-3:2020 (Safety aspects for DC power transfer)
• 3.1(a) EN 50665:2017 (Human exposure restrictions for electromagnetic fields)
• 3.1(a) EN 62311:2008 (Human exposure restrictions for electromagnetic fields)
• 3.1(b) EN 55032:2015+A11:2020 (Electromagnetic compatibility - Emission requirements)
• 3.1(b) EN 55035:2017 (Electromagnetic compatibility - Immunity Requirements)
• 3.1(b) EN 301 489-1 V2.2.3 (EMC standard for radio equipment - Common technical requirements)
• 3.1(b) EN 301 489-17 V3.2.4 (EMC standard for radio equipment - Broadband Data Transmission Systems)
• 3.2 EN 300 328 V2.2.2 (Wideband transmission systems - 2.4 GHz band)

Ecodesign 2009/125/EC and related regulations for external power supplies and electric power consumption.

RoHS 2011/65/EU and EN IEC 63000:2018.

Declaration Details:

For and on behalf of Sky CP Limited

Giles Harvey, MD Group Supply Chain

23 January 2023, Head Office

Statement of Compliance

Product Name: Smart Camera and Sensor Bridge

Product Type: Indoor Camera and Wireless Bridge

Model: CH130-UKIE-G01; CH180-UKIE-G01

Manufacturer: Sky CP Limited, Grant Way, TW7 5QD, United Kingdom

This statement declares compliance with applicable security requirements:

• The Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023
• Schedule 2: Conditions for Deemed Compliance with Security Requirement
• EN 303 645 Version 2.1.1: No universal default passwords (clauses 5.1-1, 5.1-2), Reporting Security Issues (clause 5.2-1), Defined Support Periods (clause 5.3-13).

The defined support period for the product is from 29 April 2024 and ending 31 December 2025.

Declaration Details:

Signature: Giles Harvey

Date of Signature: 29 April 2024

Job Title: MD Change, Supply Chain & Operations

Place of Issue: Head Office