Instruction Manual: Super Mini Wi-Fi Switch Module
Model: QS-WIFI-S06-16A
Product Overview
The Super Mini Wi-Fi Switch Module (QS-WIFI-S06-16A) is a compact device designed to bring smart control to your home appliances. It allows for remote operation via a mobile app and voice control integration.
The module is a small, square-shaped device measuring approximately 39mm x 39mm x 15mm, featuring a reset button on one side.
It supports Wi-Fi connectivity (802.11 b/g/n) and operates on the 2.4GHz frequency band.
The product bears RoHS [RoHS] and CE [CE] certifications.
Technical Specifications
| Product Type | Mini Wi-Fi Switch Module |
|---|---|
| Voltage | 100-250V AC |
| Current | 16A |
| Max. Load | 3680W / 300W for LED |
| Operation Frequency | 2.4GHz~2.4835GHz |
| WiFi Standard | 802.11 b/g/n |
| Operation Temperature | -10°C - +40°C |
| Operation Range | ≤ 200 m |
| Dimensions (WxDxH) | 39x39x15 mm |
| IP Rating | IP20 |
| Warranty | 1 year |
Manual Override
The switch module terminal allows for manual override to switch the connected device on or off. This function provides permanent on/off control.
Note: Adjustments made via the app and manual switch can overwrite each other; the last adjustment made will be retained. The app control is synchronized with the manual switch.
Installation
Warnings:
- Installation must be performed by a qualified electrician in accordance with local regulations.
- Keep the device out of reach of children.
- Keep the device away from water, damp, or hot environments.
- Install the device away from strong signal sources like microwave ovens, which can cause signal interruption and abnormal operation.
- Obstructions like concrete walls or metallic materials may reduce the effective operation range and should be avoided.
- Do not attempt to disassemble, repair, or modify the device.
Wiring Instructions and Diagrams:
Important: Turn off the power supply before commencing any electrical installation work.
Configuration with an Ordinary Switch:
Diagram shows a connection where the live wire (L) from the power source connects to the module's input terminal (L). The neutral wire (N) connects to the module's input terminal (N). The module's output terminal (L1) connects to the live input of the ordinary switch. The output of the ordinary switch connects to the appliance's live terminal. The neutral wire (N) from the power source connects directly to the appliance's neutral terminal.
Wiring Steps:
- Connect wires according to the wiring diagram.
- Insert the module into the junction box.
- Turn on the power supply and follow the switch module configuration instructions (refer to App User Manual).
Configuration without an Ordinary Switch (for outlets):
Diagram shows a connection where the live wire (L) from the power source connects to the module's input terminal (L). The neutral wire (N) connects to the module's input terminal (N). The module's output terminal (L1) connects directly to the appliance's live terminal. The neutral wire (N) from the power source connects directly to the appliance's neutral terminal.
Wiring Steps:
- Connect wires according to the wiring diagram.
- Insert the module into the junction box.
- Turn on the power supply and follow the switch module configuration instructions (refer to App User Manual).
Configuration Note: When configuring, place your smartphone close to the switch module and ensure you have a minimum 50% Wi-Fi signal.
App User Manual
The Super Mini Wi-Fi Switch Module is controlled via the "Smart Life" mobile application, available for iOS and Android. You can also integrate it with voice assistants like Amazon Alexa and Google Assistant.
Setup Steps:
- Register/Login: Open the Smart Life app. Register a new account using your mobile number or email address, or log in if you already have an account. Set your password and create a family group.
- Enter Pairing Mode: After wiring the switch module, press the connected traditional switch ON/OFF 5 times in quick succession (maintain a short interval between presses) until the indicator light flashes rapidly. If the module is used for an outlet without a traditional switch, cycle the power breaker ON/OFF 5 times instead.
- Add Device in App: In the Smart Life app, tap the "+" icon in the top right corner to add a device. Select the device category (e.g., "Electrical", "Smart Lighting") and then choose "Smart Lighting" or the specific module type.
- Confirm Pairing: The app will prompt you to confirm that the indicator light is blinking rapidly. Tap "Confirm light blinks rapidly".
- Network Connection: Ensure your smartphone and the Wi-Fi switch module are connected to the same 2.4GHz Wi-Fi network. Confirm the network details in the app.
- Connecting: The app will begin connecting to the device. This process typically takes 10-120 seconds, depending on your network conditions.
- Device Added: Once connected, the Wi-Fi switch module will appear in your list of devices within the app.
- Voice Control & Sharing: Connect your Smart Life account to Amazon Alexa or Google Assistant for voice control. You can also share device access with family members or friends.
- Enjoy Smart Living: Control your home lighting and appliances remotely via the app or by voice command, enhancing your smart home experience.
Frequently Asked Questions (FAQ)
- Q1: What should I do if I can't configure the switch module?
-
- Ensure the device is powered on.
- Verify that your mobile and the switch module are on the same 2.4GHz Wi-Fi network.
- Check for stable internet conditions.
- Confirm that the Wi-Fi password entered in the app is correct.
- Double-check that the wiring is correct.
- Q2: What devices can be connected to this Wi-Fi switch module?
- Most household electrical appliances can be connected, such as lamps, laundry machines, coffee makers, and more.
- Q3: What happens if the Wi-Fi goes off?
- You can still control the connected device using your traditional switch. Once the Wi-Fi is active again, the module will automatically reconnect to your Wi-Fi network.
- Q4: What should I do if I change the Wi-Fi network or password?
- You will need to re-connect the Wi-Fi switch module to the new Wi-Fi network by following the steps in the App User Manual.
- Q5: How do I reset the device?
-
- Turn the connected manual switch ON/OFF 5 times until the indicator light flashes quickly.
- Alternatively, power cycle the device ON/OFF 5 times until the indicator light flashes.
- Press and hold the reset button for 10 seconds until the indicator light flashes.
