Flexit GO

General

The Powerline adapter uses your home's electrical circuits to expand your existing data network. The integrated electric socket on the Powerline adapter enables you to connect other electronic devices to the same socket. The built-in noise filter eliminates electrical signal noise, thereby guaranteeing high-quality data transfer via your home's power cables.

The devices are used to connect Flexit ventilation products to the Internet in places where a network cable cannot be fitted. When the unit is connected to the network, you can register it in Flexit's cloud service with the Flexit GO app.

Overview

This section provides a visual overview of the setup. It shows a Flexit product connected via an electric cable to a Powerline adapter. The adapter is then connected via a network cable to an internet router, which establishes a local network connection. A smartphone displaying the Flexit GO app is also shown, indicating connectivity.

Diagram Description: A Flexit ventilation unit is shown connected to a Powerline adapter using an electric cable and a network cable. The adapter connects to an internet router via another network cable, forming a local network. A smartphone with the Flexit GO app is shown connected to this network.

For optimum function, both adapters must be connected to the same electrical phase.

✔️ Correct connection: Sockets shown on the same side.❌ Incorrect connection: Sockets shown on different sides.✔️ Correct connection: Sockets shown on the same side.✔️ Correct connection: Sockets shown on the same side.

How to Do

Follow these steps to connect your Powerline adapters:

1. Connect the first Powerline adapter to a wall socket near the product.
2. Connect a network cable between the product and the adapter.

If the network cable from the device is not long enough, use the network cable supplied with the adapter and connect it to the lead connector on the cable from the device.

Network cable on Nordic-products

Diagram shows connecting the network cable (labeled '2') from the ventilation unit to the Powerline adapter.

Network cable on EcoNordic-products

Diagram shows connecting the network cable (labeled '2') from the ventilation unit to the Powerline adapter. A separate image (labeled '3') shows an inline connector/coupler.

3. Connect the second Powerline adapter to a wall socket near your home's internet router.
4. Plug the included network cable between the adapter and the router.

When the connection is complete, wait for the Powerline indicator light to show a constant light. This indicates that the adapters are communicating with each other.

Now you can download the Flexit GO app and connect your unit to the cloud service. This ensures your unit always has the latest software, and Flexit can assist you remotely if needed. You can also control the unit from your phone or tablet.

Pairing Multiple Powerline Devices

If you have several Powerline devices in the same household, you can pair the adapters together to avoid interference.

1. Check that the Power indicator lights on the Powerline devices show a constant light.
2. Press the Pair button (⚙️) on one of the devices for one second. The Power LED will start to flash (?).
3. Within two minutes, press and hold the Pair button (⚙️) for one second on the other Powerline adapter. The Power indicator light will start to flash (?). When the Powerline LED lights up (▶️), the pairing process is complete.

Adapter Overview

The Powerline adapter features:

• Socket outlet: For connecting the adapter to the power supply and for passing through power to other devices.
• Ethernet outlet: For connecting the network cable.
• Button for device pairing: Used to pair adapters.

Overview of LEDs

The adapter has indicator lights (LEDs) to show its status:

Power

• ? Constant light: The device is connected to power.
• ? Rapid flashing: The devices are being paired.
• ? Slow flashing: The device is in standby mode.

Powerline

• ▶️ On: The device is connected to the receiver (the other Powerline adapter).
• ⚫ Off: The device is not connected to the receiver.

Ethernet

• ▶️ On: The Ethernet port is connected (network cable is plugged in).
• ⚫ Off: The Ethernet port is not connected.

*If the receiver is inactive for more than 5 minutes, the adapter will revert to standby mode.

FAQ - Frequently Asked Questions

1. How do I reset my Powerline adapter?

Make sure the Powerline adapter is connected to the wall socket. Hold the pairing button (⚙️) in for more than 6 seconds, until the power lamp (?) goes out for a moment and then relights again.

2. What do I do if the Powerline LEDs have gone out?

• Try a different wall socket, and make sure that both Powerline devices are connected to the same electrical phase.
• Try to create a stable network by pairing the devices. See the section above on pairing.

3. What action do I take if there is no Internet connection via my Powerline adapters?

• Make sure that both adapters are connected to the same electrical phase.
• Make sure that the Powerline LEDs light up on both your Powerline devices. If not, pair the adapters together.
• Make sure that all devices are correctly connected.
• Check that you have an Internet connection by connecting your computer directly to the router.

4. What can I do if a paired device does not reconnect after moving it to a new position?

• Try a different socket on the same electrical phase.
• Try to pair it up again, and see if the Powerline LEDs light up.
• Check any interference from washing machines, dishwashers, or other household products. You can connect the appliances to the socket in the adapter to eliminate any interference from them. If there are several products, a terminal block can be connected to the adapter to provide more outlet sockets.