ISJAKT LED Floor Uplighter/Reading Lamp
Design and Quality IKEA of Sweden
Safety Information
⚠️ Important Safety Instructions:
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. If you are uncertain, please contact IKEA.
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Assembly Instructions
Required tool: 1x Wrench [?]
Connect two pole sections using the threaded ends, washers, and nuts. Tighten the connection using the provided wrench.
[Diagram Description: Shows two pole sections being joined with threaded ends, washers, and nuts. Arrows indicate screwing and tightening with a wrench.]
Attach the base to the bottom of the assembled pole section. Secure with two screws (2x).
[Diagram Description: Shows the base being attached to the bottom of the pole with two screws.]
Connect the next pole section to the assembled pole. Feed the cable through the designated opening. Tighten the connection using the wrench.
[Diagram Description: Shows a pole section being connected, with a close-up of a cable being routed through a component and a connection being tightened with a wrench.]
Connect the subsequent pole section. Tighten the connection using the wrench.
[Diagram Description: Shows another pole section being connected and tightened with a wrench.]
Screw the pole sections together to form the complete pole structure.
[Diagram Description: Shows pole sections being screwed together.]
Connect the lamp head assembly to the top of the pole.
[Diagram Description: Shows the lamp head assembly being connected to the top of the pole.]
Connect the power adapter to the lamp's power input socket.
[Diagram Description: Shows a power adapter plug being inserted into the lamp's power socket.]
Operation
ℹ️ Lamp Head Adjustment:
The lamp head can be rotated and tilted to direct light as desired.
[Diagram Description: Shows the lamp head being rotated left/right and tilted up/down.]
ℹ️ Brightness Control:
Use the rotary knobs to adjust the brightness of the light. The top knob controls dimming (brightness adjustment).
[Diagram Description: Shows two rotary knobs on the pole. The top knob is highlighted with a graphic indicating brightness adjustment.]
