Zyxel WX5600-T0 Dual-Band Wireless AX6000 Gigabit Extender

Setting Up the Zyxel Device

Follow these steps to set up your Zyxel Device:

1. Attach the bracket to the bottom of the Zyxel Device.
2. Place the Zyxel Device where you want to extend your wireless network.
3. Plug in the power adapter and turn on the Zyxel Device. Wait for about 2 minutes until the Power LED lights up steady green.

MPro Mesh Network Scenario 1: With MPro Mesh Router

This scenario applies if you have a Zyxel router that supports MPro Mesh. If not, refer to Network Scenario 2.

Note: To check MPro Mesh router compatibility, scan the QR code on the last page. To set up with the MPro Mesh app, scan the QR code on the last page.

1. Use the included Ethernet cable to connect the Zyxel Device's 2.5G LAN port to the MPro Mesh Router's LAN port. Wait for the POWER and LINK LEDs to be steady green.
2. Unplug the Ethernet and power cables from the Zyxel Device.
3. Place the Zyxel Device where you need better WiFi coverage.
4. Plug in the power adapter. Ensure the LINK LED is steady green. If the LINK LED is red, move the Zyxel Device closer to the MPro Mesh Router.
5. To add more extenders, repeat from step 1.

LED Status Descriptions:

• Power LED:
  Green On: Power is on or MPro Mesh pairing is done.
  Green Blinking: Device is starting up or in MPro Mesh pairing.
  Red On: System error.
  Red Blinking (Fast): Firmware upgrade in progress.
  Red Blinking (Slow): MPro Mesh process failed.
• Link LED:
  Green On (With WiFi Connection): Good WiFi connection to MPro Mesh router.
  Green On (With Wired Connection): Ethernet cable connected to 2.5G LAN port.
  Green Blinking: Transmitting/receiving WiFi data.
  Red On: Weak signal; move device closer to router.
  Off: 2.4G/5G WiFi disabled.
• WPS LED:
  Amber On: Zyxel Device is the controller.
  Amber Blinking: WPS process in progress.
  Off: WPS process completed.

MPro Mesh Network Scenario 2: With Non-MPro Mesh Router and Two Zyxel Devices

This scenario applies when using a non-MPro Mesh router and extending the network with two Zyxel Devices.

1. Connect the first Zyxel Device (Zyxel Device-1) 2.5G LAN port to the Non-MPro Mesh Router's LAN port using an Ethernet cable. Wait for POWER and LINK LEDs to be steady green.
2. Connect the second Zyxel Device (Zyxel Device-2) 2.5G LAN port to the first Zyxel Device (Zyxel Device-1) 2.5G LAN port using another Ethernet cable. Wait for POWER and LINK LEDs on Zyxel Device-2 to be steady green.
3. Unplug the Ethernet and power cables from Zyxel Device-2.
4. Place Zyxel Device-2 where you need better WiFi coverage.
5. Plug in the power adapter. Ensure the LINK LED is steady green. If the LINK LED is red, move Zyxel Device-2 closer to Zyxel Device-1.
6. To add more extenders, repeat from step 2.

Note: Do not unplug the Ethernet cable connecting Zyxel Device-1 and the Non-MPro Mesh Router in this scenario.

LED Status Descriptions (for Zyxel Device-2):

• Power LED:
  Green On: Power is on or MPro Mesh pairing is done.
  Green Blinking: Device is starting up or in MPro Mesh pairing.
  Red On: System error.
  Red Blinking (Fast): Firmware upgrade in progress.
  Red Blinking (Slow): MPro Mesh process failed.
• Link LED:
  Green On (With WiFi Connection): Good WiFi connection to Zyxel Device-1.
  Green On (With Wired Connection): Ethernet cable connected to 2.5G LAN port.
  Green Blinking: Transmitting/receiving WiFi data.
  Red On: Weak signal; move device closer to Zyxel Device-1.
  Off: 2.4G/5G WiFi disabled.
• WiFi LED:
  Green On: 2.4G/5G WiFi is ready.
  Green Blinking: Transmitting/receiving WiFi data.
  Off: 2.4G/5G WiFi disabled.
• WPS LED:
  Amber Blinking: WPS process in progress.
  Off: WPS process completed.

Managing Your Zyxel Device Using the MPro Mesh App

Download the MPro Mesh app from the Apple App Store or Google Play Store to manage your Zyxel Device.

Note: To manage your Mesh network, connect the MPro Mesh app to the Controller (MPro Mesh Router in Scenario 1 or Zyxel Device-1 in Scenario 2).

Scan the QR codes provided to:

• See a list of Zyxel devices that support MPro Mesh.
• See steps for setting up your Zyxel Device with the MPro Mesh app.

FCC Legal Information

The FCC legal information and safety warnings are accessible via the web configurator. You can also find them at:

• FCC Legal Info: http://x.x.x.x/legalinfo
• Safety Warnings: http://x.x.x.x/safetyinfo

Legal and Regulation Details:

Model Name: WX5600-T0

Product Name: Dual-Band Wireless AX6000 2.5G Extender

US Importer: Zyxel Communications, Inc, 1130 North Miller Street Anaheim, CA 92806-2001, https://www.zyxel.com/us/en/

FCC ID: 188WX5600-T0

FCC Warning Statement:

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
3. This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
4. If this device does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
   
   • Reorient or relocate the receiving antenna.
   • Increase the separation between the equipment or devices.
   • Connect the equipment to an outlet other than the receiver's.
   • Consult a dealer or an experienced radio/TV technician for assistance.