Waterless Milk Warmer™ Quick Start Instructions
Review instruction manual for important safeguards prior to first use.
Set-up
Step A: Prepare Liner
Description: An illustration shows a white liner being expanded. Text indicates: "Expand liner prior to installing in warmer."
Step B: Attach Hinges
Description: An illustration shows the warmer lid with hinges being attached. Text indicates: "Bend insert at hinge and place into position."
Step C: Insert Liner
Description: An illustration shows the expanded liner being spread evenly inside the warmer cavity. Text indicates: "Evenly spread liner within warmer cavity."
Step D: Insert Tray
Description: An illustration shows a yellow tray being pushed flat-side down into the bottom of the warmer. A separate image shows a "Correct" and "Incorrect" indicator. Text indicates: "Push tray, flat-side down, into bottom of warmer."
Step E: Load Feed and Power On
Description: An illustration shows a container being placed into the insert tray. Text indicates: "Load feed. NOTE: Always use insert tray to warm container or syringe." Another illustration shows a finger pressing the power button on the device, which has a display showing "00:00". Text indicates: "Press power button to turn on the device."
Program
Select Mode
Select either 'WARM' or 'THAW' mode using the up/down arrow buttons [up arrow] [up arrow]. Press enter.
Note: Thaw Mode automatically defaults to 'Frozen' temperature.
Select Starting Temperature
Select the starting temperature of milk. Options include: [refrigerator icon], [room icon], or [frozen icon]. Use the up/down arrow buttons [up arrow] [up arrow] for selection. Press enter.
Select Volume
Select the volume of milk to be warmed. The display shows "888 mL". Use the up/down arrow buttons [up arrow] [up arrow] to adjust. Press enter.
Note: Hold the arrow key to advance more quickly.
Confirm & Begin
Confirm settings for Mode, Start Temp, and Volume. Then press the [start button] button to begin.
Ready
Flashing green light indicates milk is ready.
Transitions
From 'THAW' mode, the display shows the time remaining. When thawing is complete, the display shows "Flashing Green".
From 'WARM' mode, the display shows the time remaining.
Actions
Remove
Thaw complete. Remove milk before ice melts. Note: Proceed to [WARM mode] when ready to prepare for feeding.
Hold
Feed will stay warm for up to 30 minutes. Remove container or syringe when ready to feed. Note: Lift the lid to pause or stop the warmer.
Press the [Feed button] to dispense.