INSPIRE KRELA Pendant Light
Model: KRELA
EAN Code: 3276007382808
Product Number: 780115
Welcome
Thank you for purchasing this product. We recommend that you read the installation, user, and maintenance instructions carefully. We have designed this product to ensure your complete satisfaction. If you require assistance, the team at your retailer is on hand to help you.
Safety Information
Important Symbols:
- ⚠️ Attention danger: Indicates potential hazards.
- ? Hors tension / Power off: Ensure the power is disconnected before working on the fixture.
- ⚡ Mise sous tension / Power up: Indicates when power is connected.
- ⚖️ Legal & Safety Instructions: Refers to legal and safety guidelines.
Package Contents and Tools
Included Parts:
- A: Main fixture body (x1)
- B: Pendant shades (x2)
- C: Pendant shades (x2)
- D: Ceiling canopy/mount (x2)
- E: Mounting bracket (x1)
- F: Decorative caps/covers (x2)
Required Tools (Not Included):
- Screwdriver (Phillips head, N*2)
- Drill with 6mm drill bit
- Hammer
- Ladder
Bulb Information:
- Socket Type: E27
- Maximum Wattage per Bulb: 40W
- Number of Bulbs: 3
Guarantee: 5 Year Guarantee
Technical Specifications
| Characteristic | Specification |
|---|---|
| Rated voltage | 220-240V~ |
| Frequency | 50/60Hz |
| Rated wattage / Lamp socket | E27, 3x Max. 40W |
| Bulb type | E27 |
| Ambient temperature | 25° C |
| Protection class | CLASS I |
| IP rating | IP20 |
Assembly Instructions
Diagram 1: General overview of the fixture, its IP20 rating, and guidance on correct installation principles (incorrect vs. correct installation shown).
Diagram 2: Attach the mounting bracket (E) to the ceiling using appropriate fixings.
Diagram 3: Connect electrical wires. Ensure the power supply is OFF (?). Connect the Live (L - Brown), Neutral (N - Blue), and Earth (Yellow/Green) wires according to standard practices. The earth wire must be connected to the earth terminal.
Diagram 4: Attach the pendant shades (B, C) to the main fixture bar (A).
Diagram 5: Insert the specified E27 bulbs (max 40W each) into the sockets (?).
Diagram 6: Secure any final components or decorative covers to complete the installation.
Diagram 7: Detailed view of wire connections: L (Live) to Brown, N (Neutral) to Blue, Earth (Ground) to Yellow/Green. Shows minimum wire lengths for connections.
Diagram 8: Attach the main fixture bar (A) to the ceiling mounting bracket.
Diagram 9: Attach the pendant shades to the fixture.
Diagram 10: Reminder of bulb specifications: E27 socket, 3 bulbs, max 40W each.
Diagram 11: Restore power to the fixture after installation is complete and all connections are secure.
Maintenance and Cleaning
Always disconnect the fixture from the electrical supply before performing any maintenance or cleaning.
Repairs must be carried out only by qualified persons using original spare parts. Improper repairs can cause serious danger.
Always use bulbs that match the specifications listed in this manual.
⚠️ WARNING: Using accessories not specified in this manual may present a risk of personal injury.
Environmental Protection
ATTENTION! Electrical products should not be disposed of with household waste. Please recycle them at designated collection points. Contact your local authorities or retailer for recycling advice. Packaging material is recyclable; please recycle it at designated collection points.
Warranty Information
Warranty Duration: The general legal warranty applies according to your country's statutory provisions from the date of delivery. INSPIRE extends the warranty period for all INSPIRE products to 5 years.
Warranty Application: For the warranty to be applied, the product must have been installed, used, and maintained according to the Instruction Manual guidelines.
Questions and Claims: If you have questions or encounter problems regarding the product's use, performance, or visual aspect, please contact your vendor using the contact information found on the purchase receipt.
Manufacturer/Distributor: ADEO Services, 135 Rue Sadi Carnot - CS 00001, 59790 RONCHIN - France.
Origin: Made in India 2021
