INSPIRE Brenta Outdoor Lighting Fixture
Model: Brenta
Brand: INSPIRE
EAN Code: 3276005905627
Warranty: 5 Years
Important Safety Instructions
General Warnings
⚠️ Attention Danger / Warning: Always read and understand all instructions before installation and use.
Ensure the power supply is switched OFF (?❌) before commencing any work on the fixture (assembly, maintenance, bulb replacement, cleaning). Remove the fuse or switch off the circuit breaker and ensure it cannot be accidentally re-activated.
⚠️ Electrical Safety: This luminaire must be installed by a qualified electrician in accordance with local wiring regulations.
Ensure the electrical specifications of the fixture are compatible with your installation.
The earth wire (Green/Yellow) should be longer than the live (Brown) and neutral (Blue) wires.
Use a supply cord of at least 3G1.0MM² (PVC wire is prohibited; H05RN-F wire is recommended).
Keep the device out of reach of children and unauthorized persons.
Before drilling, check for existing hidden wiring or pipes.
Specific Safety Instructions
Do not look directly at the operating lamp, as it may be harmful to the eyes.
Do not replace bulbs during rain.
Using accessories not specified in this manual may cause injury.
Technical Specifications
| Specification | Value |
|---|---|
| Rated Voltage | 220-240V~ |
| Rated Frequency | 50 Hz |
| Rated Wattage | MAX. 150W |
| Bulb Type | R7s MAX. 150W (Bulb not included) |
| Protection Class | CLASS I |
| IP Rating | IP44 |
Assembly and Installation
Follow the numbered diagrams for assembly. Ensure all parts are securely fastened.
Parts and Tools
Parts typically included (refer to diagrams for exact identification):
- Mounting Brackets (x2)
- Fixture Body
- Screws (various types, e.g., ST4.2*30, Ø6*30)
Tools Required (Not Included):
- Screwdriver (Phillips PH2/PH3, Slot SL2/SL3) ?
- Drill ?️
- Measuring Tape
Installation Steps
- Prepare Mounting Location: Select a suitable outdoor location. Ensure the surface can support the fixture.
- Attach Mounting Brackets: Secure the mounting brackets to the wall or surface using the appropriate screws.
- Connect Wiring: ⚡ Ensure power is OFF. Connect the fixture's wires to the mains supply:
- Brown wire (L) to Live
- Blue wire (N) to Neutral
- Green/Yellow wire (Earth) to Earth
- Mount Fixture: Attach the fixture body to the mounted brackets using the provided screws.
- Install Bulb: Insert an R7s bulb (MAX 150W, not included) into the socket.
- Final Check: Ensure all connections are secure and the fixture is firmly mounted. Restore power.
Sensor Operation
This fixture may feature a motion and daylight sensor. Typical sensor range is up to 120° horizontally and 12 meters distance, with adjustable sensitivity.
Maintenance and Cleaning
Disconnect power before cleaning or maintenance.
Clean the exterior with a soft, damp cloth. Avoid abrasive cleaners.
Keep the fixture free from debris.
Repairs must be performed by qualified personnel using genuine spare parts.
Warranty
INSPIRE provides a 5-year warranty for this product, extending the standard 2-year legal warranty. This warranty applies when the product is installed, used, and maintained according to these instructions. Contact your retailer with proof of purchase for warranty claims.
Environmental Protection
⚠️ ATTENTION: Electrical products must not be disposed of with household waste. Recycle at designated collection points. Contact local authorities or your retailer for recycling advice. Dispose of packaging responsibly.
