Introduction
This product is recyclable. If it can no longer be used, please take it to a waste recycling center.
The product comes with a 5-year guarantee.
Technical Characteristics
- Model
- SITIO
- Reference Number
- 89570407
- EAN
- 3276007753622
- Brand
- Inspire
- Max Power
- 15W
- Socket Type
- E27
- Voltage
- 110-240V
- Frequency
- 50/60Hz
- Ingress Protection
- IP20
- Dimensions
- Max Height: 102 mm, Base Diameter: approx. 60 mm
- Wiring
- Suitable for 3x0.75 mm² wires
- Guarantee
- 5 Years
Assembly Instructions
Important: Use screws and dowels suitable for your specific mounting surface.
-
Step 1: Mount the Base
Attach the base plate to the ceiling. The diagram shows a circular base plate being secured with screws.
-
Step 2: Attach the Main Body
Connect the main body of the light fixture to the mounted base plate. The diagram shows the main fixture being attached to the base.
-
Step 3: Electrical Connections
Connect the wires from the ceiling to the fixture. Ensure the correct wires are connected to their corresponding terminals (Live, Neutral, Earth). The required wire cross-section is between 0.75 mm² and 1.5 mm². A minimum wire length of 35 mm is indicated.
Wire Color Codes:
- N (Neutral): Blue
- Earth (Ground): Green and yellow
- L (Live/Phase): Brown
-
Step 4: Attach the Diffuser/Shade
Secure the diffuser or shade to the main body of the light fixture. The diagram shows the shade being attached.
-
Step 5: Final Assembly
Complete the assembly. The diagram shows the fully assembled light fixture.
-
Step 6: Install Light Bulb
Insert a light bulb into the E27 socket. The maximum recommended wattage is 15W.
-
Step 7: Power On
Turn on the light using the main power switch.
Recycling Information
This product is designed to be recyclable. When it reaches the end of its useful life, please dispose of it responsibly by taking it to an appropriate waste recycling center.
