Introduction
Thank you for purchasing this Inspire product. We recommend reading the installation, user, and maintenance instructions carefully. This product has been designed to ensure your complete satisfaction. If you require assistance, the team at your retailer is on hand to help you.
1. Warning Symbols
- Symbol: ? Description: Read the instructions carefully.
- Symbol: ⚠️ Description: Warning: minimum distance from lighted objects (0.5 meters).
- Symbol: ⛑️ Description: Safety Class II. This lamp is doubly insulated and may not be wired to a protective conductor.
- Symbol: ? Description: For indoor use only.
2. General Safety Instructions
Read this instruction manual thoroughly before using the appliance and save it for future reference. When using electrical appliances, follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury.
General Precautions
- Keep the appliance out of reach of children and unauthorized persons.
- Ensure the electrical specifications of this luminaire are compatible with your installation.
- WARNING: Power supply must be deactivated before assembly, maintenance, bulb replacement, or cleaning. Remove or switch off the fuse and ensure it cannot be reactivated.
- Before drilling holes, check for hidden wiring or pipes.
- This luminaire is intended for indoor use only.
- Replace the bulb 5-10 minutes after turning off the lamp, once the bulb has cooled down.
Electrical Safety
- The luminaire must be installed by a qualified electrician in accordance with current wiring standards in the country of installation.
- Warning: If the external cable or cord of this luminaire is damaged, it must be replaced exclusively by the manufacturer, an authorized service agent, or a qualified person to avoid any hazard.
3. Specific Safety Rules
No specific safety rules apply. This product should only be installed out of reach.
4. Environmental Protection
CAUTION! Electrical products must not be disposed of with household waste. They must be taken to a communal collection point for environmentally friendly disposal in accordance with local regulations. Contact your local authorities or retailer for recycling advice. Packaging material is recyclable. Dispose of packaging in an environmentally friendly manner and make it available for the recyclable material collection service.
5. Appliance Specifications
Technical Characteristics
| Characteristic | Value |
|---|---|
| Rated voltage | 230 V |
| Rated frequency | 50 Hz |
| Rated wattage | Max. 60W |
| Bulb rating | E27 Max. 60W |
| Ambient Temperature | 25°C |
| Protection Class | Class II |
| IP Rating | IP 20 |
6. Maintenance / Cleaning
- Always disconnect the appliance from the mains before maintenance or cleaning.
- Repairs should only be carried out by qualified persons using genuine spare parts. Inappropriate repairs could cause significant danger.
- Always use bulbs according to specifications listed in this manual.
- WARNING: The use of any accessory not specified in this manual may present a risk of personal injury.
7. Miscellaneous (Service, Repairing, Guarantee, etc.)
- Have your product repaired by a qualified person.
- This electric product complies with relevant safety requirements.
- Repairs should only be carried out by qualified persons using original spare parts; otherwise, this may result in considerable danger to the user.
- Please contact the store where you bought the product for after-sales services if any.
Warranty Duration
The general legal warranty applies according to statutory provisions in force in your country from the delivery of the goods and upon providing the receipt as proof of purchase. However, INSPIRE extends the warranty periods for all INSPIRE products to 5 years.
Warranty Application
For the warranty to be applied, the product must have been installed, used, and maintained according to the Instruction Manual guidelines.
Questions and Claims
If you have any questions or encounter problems regarding the use of the product, its performance, or visual aspect, please contact your vendor through the contact information found on the purchasing receipt.
Installation Guide
The luminaire is installed out of reach. When the luminaire is working and just turned off, the lamp may be very hot; do not touch the luminaire when it is overheating.
Step 1: Prepare the mounting bracket. Ensure the power is off at the breaker. Attach the mounting bracket to the ceiling using the provided screws and wall plugs (A, B). Ensure the bracket is securely fastened.
Step 2: Connect the wires. Strip approximately 5mm of insulation from the ends of the wires. Connect the live wire (L) to the corresponding terminal, the neutral wire (N) to its terminal, and the earth wire (if present) to the earth terminal. Ensure connections are secure.
Step 3: Attach the luminaire. Carefully lift the luminaire and attach it to the mounting bracket. Secure it in place according to the diagram.
Step 4: Install the bulb. Ensure the power is still off. Screw in an E27 bulb with a maximum wattage of 60W.
Step 5: Turn on the power. Restore power at the breaker and test the luminaire.
