Denver CCT-1230 Dash Cam for Cars

Introduction

Welcome to the instruction manual for the Denver CCT-1230 Dash Cam for Cars. Please read this manual carefully and completely before operating the product.

The internal battery is designed solely to ensure recordings are saved correctly and is not intended for extended use due to its small capacity.

Visit www.denver.eu for more information.

Safety Information

Please read the following safety instructions carefully before using the product for the first time and keep them for future reference.

• Warning: This product includes a lithium polymer battery.
• Keep the product out of the reach of children and pets to avoid chewing and swallowing.
• Product operating temperature is from 0°C to 45°C, and storage temperature is from 0°C to 45°C. Temperatures outside this range may affect functionality.
• Never open the product. Touching internal electronics can cause electric shock. Repairs or service should only be performed by qualified personnel.
• Do not expose to heat, water, moisture, or direct sunlight.
• The unit is not waterproof.
• If water or foreign objects enter the unit, it may result in fire or electric shock. Stop use immediately if this occurs.
• Only use the supplied 12V car adapter.
• Do not use non-original accessories, as this may cause abnormal product functionality.

Product Structure

The Denver CCT-1230 features the following components:

• 1. LCD screen
• 2. UP/Mute button
• 3. Menu button
• 4. OK/Power button
• 5. Mode button
• 6. Down button
• 7. Reset button
• 8. Lens
• 9. Microphone (Mic)
• 10. Night lights
• 11. SD card Slot
• 12. USB port

Operating Instructions

1. Charging

   Connect the camera to the car charger via the USB port.

2. Turn on/off camera

   If the camera is connected to the car charger, it will automatically turn on with the car.

   If not connected in the car, follow these steps:

   • Long press the OK/Power button to turn the camera on.
   • Long press the OK/Power button again to turn the camera off.

3. Video Recording

   If the camera is connected to the car charger, it will start video recording automatically and stop when the car is turned off.

   If the camera is not connected to the car charger:

   • After turning the camera on, press the OK/Power button to start video recording.
   • Press the OK/Power button again to stop video recording.

4. Photo Taking

   After turning on the camera, short press the Mode button to switch to photo mode.

   Then, short press the OK/Power button to take a photo.

5. Playback

   After turning on the camera, short press the Mode button to switch to playback mode.

   Then, short press the OK/Power button to playback recorded video.

6. Video Setup

   In video mode, short press the Menu button to access video specifications.

   Short press the Menu button again to navigate to the second menu page.

7. Photo Setup

   After turning on the camera, short press the Mode button to switch to photo mode.

   Then, short press the Menu button to set up photo specifications.

Specifications

Troubleshooting

For problems in normal operating situations, please try these methods:

• Cannot take photo and recording: Check if the TF card has enough free space or is locked.
• "files error" when replaying photo or video: This may be due to SD card storage errors. Please format your SD card.
• Black image when recording sky or water scene: Scenes with high contrast can influence the automatic exposure function of the camera. You can adjust "EV" in the setting mode to correct this.
• Color is not perfect in cloudy day and outdoor light: Set the "white balance" function to automatic.
• Cross stripe interference in image: Due to incorrect "light frequency" settings, please set it to 50Hz or 60Hz according to the local power supply frequency.
• Crash: Restart the camera by pressing the "RESET" button.

Disposal and Recycling Information

The Denver CCT-1230, like many electronic devices, contains materials that require responsible disposal. The product and its accessories are recyclable.

The crossed-out trash can symbol [crossed-out trash can symbol] indicates that electric and electronic equipment and batteries should not be disposed of with regular household waste. They must be disposed of separately.

As an end user, it is important to submit your used batteries and electronic equipment to the appropriate and designated facility. This ensures that batteries are recycled in accordance with legislation and do not harm the environment.

Collection points are established in cities where electric and electronic equipment and batteries can be submitted free of charge at recycling stations and other collection sites, or collected from households. Additional information may be available from your city's technical department.

Please prioritize repair or donation of your device.