Ecler KICK-SB18 Loudspeakers - Subwoofers
Product Overview
The Ecler KICK-SB18 is a wooden outdoor subwoofer reinforcement cabinet designed for long-term reliability and weather protection with an IP46 rating. It features an 8" water-resistant treated woofer and an 18mm Plywood birch enclosure with a Polyurea coating. The subwoofer delivers 350 WRMS at 8Ω and is ready for wall-mounting using the included bracket, or can be positioned vertically or horizontally.
Key Features
- 350W at 8Ω (RMS) Outdoor passive subwoofer.
- 1x 8" water-resistant treated cone woofer.
- 18mm Plywood birch with Polyurea coating enclosure material.
- 2x Speakon® connectors (Input + Stack Output).
- Weather-protected with IP46 rating.
- Rubber feet for floor installation (vertical or horizontal) included.
- Wall bracket included for wall-mounted installations.
- EASE files available.
Applications
- Hospitality
- Leisure
- Sports and wellness
Technical Specifications
System
- Effective Frequency Range: 25Hz-4.8kHz (-10dB)
- Power Handling: 350W RMS / 1400W Peak
- Sensitivity: 91 dB (1W/1m)
- Maximum SPL: 116dB continuous / 122dB peak
- Recommended amplifier power: 700W RMS
Transducers
- Ways: Subwoofer
- Driver: Water resistant Treated Cone
- Low frequency driver: 1x 8" woofer
- Nominal impedance: 8Ω
Filters
- Crossover filter: No
- Recommended High-Pass protection filter: 40 Hz with minimum 12 dB / octave filter
Physical
- Connection type: 2 x Speakon® 4C (+1, -1)
- Installation options: Surface, Wall mounting
- Environmental: IP46 rated
- Enclosure material: 18mm Plywood birch with Polyurea coating
- Grille material: Aluminium
- Grille fixing system: Screws
- Operating temperature: Min: -20°C; Max: 70°C
- Operating humidity: <85% HR
- Storage temperature: Min: -20°C; Max: 70°C
- Storage humidity: <90% HR
- Included accessories: 4 x Rubber foot (screws included), 1 x Wall support system (screws not included), 2 x Speakon®
- Finished colour: Black (RAL 9005)
- Dimensions (WxHxD): 400 x 450 x 250 mm / 15.75 x 17.72 x 9.84 in
- Weight: 14 Kg / 30.86 lb
- Pieces per box: 1
- Shipping dimensions (WxHxD): 560 x 355 x 495 mm / 22.05 x 13.98 x 19.49 in.
- Shipping weight: 17.3 Kg / 38.14 lb
Frequency Response On-Axis
A graph displays the Sound Pressure Level (SPL) in dB at 1W/1m versus frequency in Hz. The curve starts at approximately 65 dB at 20 Hz, rises sharply to around 90 dB at 63 Hz, and then fluctuates between 90 dB and 100 dB from 125 Hz to 500 Hz, with a peak around 95 dB at 250 Hz.
Mechanical Diagram
The mechanical diagram shows various views of the KICK-SB18 subwoofer, including front, side, and rear perspectives, highlighting dimensions and connection points. All measurements are in mm.
A&E Specifications
The loudspeaker is a 1-way wooden subwoofer cabinet featuring a high-efficiency 1x8" woofer. It offers an RMS power handling of 350 W, a peak power handling of 1400 W, and an effective frequency range of 25Hz-4.8kHz (±10 dB). The sensitivity is 91 dB (measured at 1 meter with 1 Watt input), and the maximum continuous sound pressure level is 116 dB. The nominal impedance is 8 Ω. The enclosure is constructed from 18mm plywood birch and is weather-protected with an IP46 rating. The grille is made of aluminum and includes a rotatable logo. The unit features an input and stack output with Speakon® connectors. The overall dimensions are 400 mm wide, 450 mm high, and 250 mm deep, with a weight not exceeding 14 Kg. The loudspeaker model is the Ecler KICK-SB18.
All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.
For technical queries, contact your supplier, distributor, or complete the contact form on the Ecler website under Support/Technical requests.
NEEC AUDIO BARCELONA S.L.
Motors, 166-168 - 08038 Barcelona - Spain
Tel. (+34) 932238403
information@ecler.com
www.ecler.com
