Philips TAT2709 Open Wireless Earphones

Table of Contents

1 Important Safety Instructions

Hearing safety

Listen at a reasonable volume within a reasonable time. After adapting to hearing, be careful not to continuously increase the volume.

Do not turn up the volume too high so that you cannot hear the surrounding sounds.

For safety reasons, when driving or in other potentially dangerous environments, you should avoid letting music or phone calls distract your attention.

To avoid damage or malfunction:

Warning:

• Do not place headphones in high temperature environments.
• Do not drop the earphones.
• Do not immerse the headphones in water.
• Do not charge the earphones when the interface or socket is wet.
• Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives to clean the earphones.
• If the earphones need cleaning, use a soft, dry cloth.
• Replacing batteries with incorrect models may seriously damage headphones and batteries.
• Charging batteries with high-temperature environments may result in explosion or leakage of flammable liquid.
• To avoid the risk of fire, the equipment may only be supplied by a safety extra-low voltage according to the marking on the appliance.

Operation and storage temperature and humidity:

Operate the product in an environment with a temperature between 0°C (32°F) and 45°C (113°F) and a maximum relative humidity of 90%.

Store the product in an environment with a temperature between -20°C (-4°F) and 50°C (122°F) and a maximum relative humidity of 90%.

High or low temperature environments may shorten battery life. Replacing batteries with incorrect models may seriously damage headphones and batteries (such as certain types of Lithium-ion batteries).

2 Open Wireless Earphones

Welcome to purchase and use Philips products! To ensure that you charge, please visit www.philips.com/support.

Using this Philips true wireless earphone, you can:

• Enjoy convenient wireless hands-free calling.
• Enjoy and control music wirelessly.
• Switch between calls and music.

Items in the packaging box:

The packaging box contains:

• Open Wireless Earphones
• Charging case
• Type-C charging cable (for charging only)

Overview of Open Wireless Earphones:

Headphones:

• ① Eartips
• ② LED indicator lights (headphones)
• ③ Charging contacts
• ④ Sound holes
• ⑤ Multi-function key (MFT)

Charging Case:

• ⑥ LED indicator light (battery status or charging status)
• ⑦ USB-C charging ports

Other Equipment:

• Quick Start Guide
• Guarantee
• Safety Manual

A phone or device that supports Bluetooth and is compatible with headphones (such as laptops, tablets, Bluetooth adapters, MP3 players, etc.).

3 Getting Started

Battery Charging

Headset:

Put the earphones in the charging case.

• The earphone charging and the blue LED indicator light come on.
• When the earphones are fully charged, the indicator light goes out.

Charging case:

Connect one end of the USB-C charging cable to the charging case and the other end to the power source.

Note: Usually, it takes 2 hours to fully charge the earphone or charging case through a USB cable.

Note: The charging case is used as a portable back-up battery to charge the earphones. After the charging case is fully charged, it can fully charge the earphones twice.

Wearing method

Inserting headphones:

1. Close the left and right eartips of the earphones.
2. Insert the headphones into your ear and gently seat them until they are firmly attached.

Pairing headphones with Bluetooth devices for the first time:

1. Ensure that the earphones are fully charged and the power is turned off.
2. Open the charging case cover and remove the earphones from the charging case.
3. The blue LED indicator lights on the two earphones alternate between white and blue flashing.
4. The earphones are now in pairing mode and can be paired with Bluetooth devices such as mobile phones.

Turn on the Bluetooth function of the Bluetooth device

For the earphones with Bluetooth devices, please refer to the user manual of the Bluetooth device.

Note: After pairing, if the earphones cannot find any previously connected Bluetooth devices, turn on the Bluetooth function of the Bluetooth device, you will be prompted to connect to the earphones.

The following example demonstrates how to pair headphones with Bluetooth devices:

1. Turn on the Bluetooth function of the Bluetooth device and select Philips TAT2769.

If prompted to enter the headphone password, please enter "0000" (4 zeros). For Bluetooth devices equipped with Bluetooth 3.0 or higher versions, no password is required.

4 Using Headphones

Power on/off

The blue LED indicator light is flashing. The earphones will search for the last automatically reconnect with it. If the last connected device is unavailable, the earphones will search and reconnect to the second last connected device.

Note: If you lost turn on the earphones and then turn on the Bluetooth function of the Bluetooth device, you can pair the earphones with the Bluetooth device according to the instructions in the user manual. See page 6 for pairing headphones with Bluetooth devices for the first time.

Manage music and calls

Call control

Voice assistant

Stop voice assistant: Press and hold the right/left earphones for 1 second.

Headphone LED indicator status

Charging case LED indicator status

5 Reset Earphones

If you encounter any pairing or connection issues, you can follow the steps below to reset the headphones to factory settings:

1. Enter the Bluetooth menu of the Bluetooth device and remove Philips TAT2769 from the device list.
2. Turn off the Bluetooth function of the Bluetooth device.
3. Remove the earphones from the charging case (ensuring no Bluetooth device is connected).

Put the earphones into the charging compartment, press and hold the multi-function key for 5 seconds, and the earphones will be reset to factory settings.

Follow the steps in "Using Earphones - Connecting Earphones to Bluetooth Devices".

Pair the earphones with your Bluetooth device and select Philips TAT2769.

6 Technical Data

• Music playback time: 5+15 hours
• Earphone charging time: 1.5H
• Charging time for charging compartment: 2 hours
• Both earphones are equipped with 40mAh lithium-ion batteries.
• The charging box contains a 300mAh lithium-ion battery.
• Bluetooth version: 5.0
• Compatible Bluetooth configuration protocols: HFP (Hands Free Configuration Protocol), A2DP (Advanced Audio Transmission Protocol), AVRCP (Audio Video Remote Control Protocol)
• Supported audio decoding: SBC/AAC
• Frequency range: 2.400-2.480GHz
• Transmitter power: <10dBm
• Operating distance: up to 10 meters away
• Automatic power off
• Low battery warning: Provided

Note: Specifications may change at any time without prior notice.

7 Notice

Declaration of Conformity

MMD Hong Kong Holding Limited hereby declares that this product complies with the basic requirements and other relevant regulations of the RED Directive 2014/53/EU and the UK Radio Equipment Regulation 2017No1206. You can log in to www.philips.com/support to find the compliance statement.

Disposal of old products and batteries

This product is designed and manufactured with high-quality materials and components, and can be recycled and reused.

This symbol indicates that this product contains European Union directives on waste electrical and electronic equipment (WEEE). This symbol also indicates that the product should not be disposed of as normal household waste. Please send the product to the official recycling point or service center to recycle it. This helps to protect the environment and human health.

Dismantling the integrated battery:

Before removing the battery, ensure that the earphones are disconnected from the charging case.

Before removing the battery, ensure that the charging case is disconnected from the USB charging cable.

This symbol indicates that this product contains a built-in rechargeable battery regulated by Directive 2013/56/EU. It cannot be disposed of together with ordinary household waste. We strongly recommend that you send the product to an official Philips service center or other professional personnel to remove the rechargeable battery. Please search for a recycling system applicable to electrical and electronic products, as well as batteries, in your country/region. Properly handling old products and rechargeable batteries together with regular household waste prevents negative impacts on the environment and human health.

Compliant with Electromagnetic Field (EMF) regulations

This product complies with all applicable standards and regulations regarding electromagnetic field exposure.

Environmental Information

All unnecessary packaging has been omitted. We strive to make packaging easy to be divided into three materials: cardboard (box), foam plastic (buffer), and polyethylene (bag, protective foam board). Your system contains recyclable materials (if dismantled by a professional company). Please comply with local regulations regarding the handling of packaging materials, waste batteries, and old equipment.

Canada

The license-free transmitter/receiver included in this device complies with the license-free RSS standard of the Department of Innovation, Science and Economic Development Canada. Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must be able to accept any interference received, including interference that may cause the device to malfunction.

IC Radiation Exposure Statement:

This device complies with Canada's radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 0cm between the radiator and your body.

CAN ICES-003(B)/NMB-003(B)

8 Trademarks

Bluetooth

The Bluetooth text mark and logo are registered trademarks of Bluetooth SIG, Inc., and any use of this mark by MMD Hong Kong Holding Limited is licensed. Other trademarks and product names are the trademarks and product names of their respective owners.

Siri

Siri is a registered trademark of Apple Inc. in the United States and other countries/regions.

Google

Google and Google Play are registered trademarks of Google LLC.

9 Frequently Asked Questions and Answers

The Bluetooth earphones are connected to a phone that supports Bluetooth, but music can only be played through the phone's speaker.

Please refer to the user manual of your mobile phone. Choose to listen to music through the headphones.

The sound quality is too poor, you can hear popping sounds.

The Bluetooth device is out of the connection range. Shorten the distance between the earphones and Bluetooth devices, or use a device that is closer to the earphone.

Charge the earphones.

When mobile phone transmission is slow, or when audio transmission is interrupted, the sound quality is very poor.

Unable to pair

Put the two earphones into the charging case. Ensure that your phone not only supports mono HFF, but also A2DP, and is compatible with BT4.0x for higher version).

Go to the Bluetooth device and remove Philips TAT2769 from the Bluetooth device list.

The earphones may have been reset, or the earphones may have been paired with another device. Re-pair the earphones with the Bluetooth device according to the instructions in the user manual. See page 6 for pairing headphones with Bluetooth devices for the first time.

The Bluetooth device cannot find the earphones.

The earphones may have been connected to a previously paired device. Close the connected device or move it out of the connection range.

The pairing may have been reset, or the earphones may have been paired with another device. Re-pair the earphones with the Bluetooth device according to the instructions in the user manual. See page 6 for pairing headphones with Bluetooth devices for the first time.