Manuals+

Tigo TS4-A-O: Module-level Optimization

Product Overview

The TS4-A-O is an advanced add-on solution designed to bring smart module functionality to standard PV modules. It enhances performance through optimization, enables rapid shutdown capabilities, and provides module-level monitoring.

Key Specifications:

  • Maximum power: 700W
  • Maximum voltage: 80VDC
  • Maximum current: 15ADC
  • Maximum system voltage: 1000V / 1500V

Installation must adhere to ANSI/NFPA 70 wiring methods. Modules should not be installed in readily accessible locations (as per Canada regulations). Connectors from different manufacturers cannot be mated with each other.

Note: Collect the TS4 QR code for system mapping to enable monitoring and safety features.

Compliance and System Components

The TS4-A-O is classified as Photovoltaic Rapid Shutdown Equipment, compliant with NEC 690.12 and C22.1-2015 Rule 64-218.

The Tigo Access Point (TAP) is a PVRSE device that maintains a keep-alive signal to the TS4 (attenuator) device via wireless communications. The TAP must be powered from the same circuit as the RSI (Rapid Shutdown Initiator) and linked to the inverter's shutdown.

The device features Class II double insulation and is certified by TÜV Rheinland.

Safety Information

DANGER: High Voltage

IMPORTANT NOTICE: Electricity will be supplied to the Tigo TS4-A output cables immediately when connected to a PV module exposed to sunlight. Use care when handling.

Precautions: When connecting to a PV module exposed to sunlight, electricity will be supplied to the Tigo TS4-A output cables. Handle with care.

ATTENTION! Once connected to a PV module exposed to the sun, the Tigo TS4-A units will allow current to pass. Be vigilant.

IMPORTANT NOTE: When connecting the Tigo TS4-A to an active PV module, the output is immediately live. Please exercise caution when handling.

IMPORTANT NOTICE: Pay maximum attention: the output cables of the Tigo TS4-A are already powered with electrical energy when connected to a photovoltaic module exposed to sunlight.

Safety Precautions: When connected to a solar module exposed to sunlight, electricity will flow immediately through the Tigo TS4-A output cables. Please be careful when handling.

Important Matters: When connecting to a solar module exposed to sunlight, electricity will flow through the Tigo TS4-A output cables simultaneously. Please handle with care.

PRECAUTION! Upon connecting the Tigo TS4-A output cables to a photovoltaic module exposed to the sun, electrical current will commence. Handle with care.

Installation Guide

Follow these steps for installing the TS4-A-O:

  1. Step 1: Module Connection
    Connect the input cables of the TS4-A-O to the PV module's positive (+) and negative (-) terminals. The TS4-A-O unit has designated connection points: 1 (PV Module -), 2 (String), 3 (String +), 4 (PV Module +).
  2. Step 2: String Connection
    Connect the output cables of the TS4-A-O units in series to form a string. The positive (+) output of one unit connects to the negative (-) input of the next unit in the string.
  3. Step 3: Final String Configuration
    Ensure all connections are secure to complete the string.

Installation Notes:

  • When installing TS4-A, connect the input cables to the PV module before connecting the TS4-A output cables in series.
  • If disconnecting TS4-A, disconnect the TS4-A output cables from the string before disconnecting the input cables from the PV module.
  • For installation with frameless modules, remove the metal clips and bolt the TS4-A directly to the rail.

Support and Resources

For further assistance and documentation:

Manuals are available online.

Models: TS4-A-O, Optimizer Module, TS4-A-O Optimizer Module

File Info : application/pdf, 2 Pages, 231.84KB

PDF preview unavailable. Download the PDF instead.

Kurzanleitung Tigo TS4 A-O-S EN

References

PDFlib PDI 9.3.1-i (macOS (arm64)) Serif Affinity Publisher (Oct 28 2021)

Related Documents

Preview Tigo TS4-A-O Module-Level Optimization: Quick Start Guide
This guide provides essential information for installing and operating the Tigo TS4-A-O, a module-level optimization and rapid shutdown solution for photovoltaic systems. Learn about its features, specifications, and installation steps.
Preview Tigo TS4-A-S Installation Quick Start Guide - Solar PV Optimizer
Concise installation guide and safety information for the Tigo TS4-A-S PV optimizer, detailing rapid shutdown functionality, module-level monitoring, and connection procedures.
Preview Tigo TS4-A-O Installation Quick Start Guide
Learn how to install the Tigo TS4-A-O, an advanced add-on solution for PV modules that provides optimization, rapid shutdown, and module-level monitoring. This guide covers connection procedures, safety precautions, and product specifications.
Preview Tigo TS4-A-O/S/M with TAP and CCA Quick Start Guide
Quick start guide for Tigo TS4-A-O/S/M optimizer, TAP access point, and CCA data logger/gateway, detailing installation, system layout, and compliance requirements for photovoltaic rapid shutdown systems.
Preview Tigo TS4-A-F Rapid Shutdown Solution: Quick Start Guide and Product Information
Comprehensive guide to the Tigo TS4-A-F rapid shutdown device, covering its features, specifications, safety precautions, and installation steps for PV modules. Includes contact information for support.
Preview Tigo TS4 UHD-Core Installation Manual: TS4, TAP, and CCA Setup Guide
Comprehensive installation manual for Tigo's TS4 UHD-Core Module-Level Power Electronics (MLPE), including Tigo Access Point (TAP) and Cloud Connect Advanced (CCA). Covers safety, system overview, product versions, functions, installation procedures, technical specifications, and troubleshooting for solar energy systems.
Preview Tigo TS4 Flex MLPE: Rapid Shutdown Solutions for Solar Energy
Explore Tigo's TS4 Flex MLPE platform for module-level rapid shutdown, enhancing safety, optimizing performance, and improving ROI for solar energy projects. Learn about TS4 models, system components, and Tigo's global leadership.
Preview Tigo TS4-A-F/2F RSS Transmitter Quick Start Guide: Installation & Safety
Quick start guide for Tigo TS4-A-F/2F and RSS Transmitters, covering installation, safety information, wiring, and compliance for rapid shutdown PV systems.