boAt Rockerz 480 Wireless Headphones

Product Overview

The boAt Rockerz 480 are wireless headphones featuring a sleek design. They come in black and white color options.

Key Components:

• Volume + button
• MFB (Multifunction Button)
• Volume - button
• RGB Button
• Charging/Bluetooth LED
• AUX Port
• Type-C Port
• Microphone

Package Contents

• 1 x boAt Rockerz 480 Headphones
• 1 x USB Type-C Charging Cable
• 1 x AUX Cable
• 1 x Manual
• 1 x Warranty Card

Basic Functions

• Play/Pause: Short press the MFB once.
• Volume Up: Press the Vol + button.
• Volume Down: Press the Vol - button.
• Next Track: Press and hold the Vol + button for 1 second.
• Previous Track: Press and hold the Vol - button for 1 second.
• Answer Calls: Short press the MFB once.
• Hang up Calls: Short press the MFB once.
• Reject Calls: Double press the MFB.
• Voice Assistant/Siri: Triple press the MFB Button.
• BEAST™ Mode: Double press the MFB to activate for low latency gaming. Double press again to return to Music Mode.

Note: Voice assistant functionality may need to be enabled in your device's settings.

Charging

Connect the USB Type-C cable to the headset and a power source (wall adapter or laptop).

• Charging Indicator: Steady red LED while charging.
• Fully Charged Indicator: Steady blue LED when fully charged.
• Low Power Indicator: Slowly flashing red LED.

Charging Norms & Precautions:

• Recommended Charger: 5V 2A
• Recommended Cable: Standard Cable (35 strands @0.10mm diameter/strand)
• Do not use unauthorized chargers.
• Headphones cannot be used while charging.

Bluetooth Connectivity

1. Power On & Pairing Mode: Press and hold the MFB for 3 seconds. The blue and red LEDs will flash alternatively.
2. Connect: Open your device's Bluetooth menu, search for 'Rockerz 480', and pair.

Power On/Off:

• Power On: Press and hold MFB for 3 seconds (Blue & Red LEDs flash).
• Power Off: Press and hold MFB for 4 seconds (Red LED blinks once).

RGB ON/OFF: Short press the dedicated RGB button to cycle through 6 LED modes or turn off LEDs.

Dual Pairing

To connect to two devices simultaneously:

1. Connect the headphones to the first device.
2. Turn off Bluetooth on both the headphones and the first device.
3. Connect the headphones to the second device.
4. Turn the first device's Bluetooth back on. The headphones should connect to both. If not, manually connect the first device again.

ENx™ Tech

The ENx™ technology cancels background noise for clear voice calls. This feature is activated by default on the microphone.

Reset

With the headphones in the 'ON' state, press and hold the Vol + and Vol - buttons simultaneously for 5 seconds. Reset should be performed in pairing mode.

Other Functions

• If Bluetooth is on but not connected, the device will power off automatically after a period.
• Incoming calls will pause music playback automatically. Music resumes from where it left off after the call ends.

Anomalies & Solutions

• Cannot find headset: Ensure the headset is powered on (Red & Blue LEDs flashing). Reboot both the headset and your phone if connection fails.
• Disconnection or noise: Check headset battery level and charge if low. Ensure there are no obstructions or excessive distance between the headset and the phone.
• Voice Assistant not responding: Ensure voice assistant is enabled in your media device's settings.

Specifications

Safety Precautions

• This is not a toy. Adult supervision is recommended for children.
• Avoid extreme temperatures (hot or cold).
• Do not listen at full volume to prevent hearing damage.
• Do not use during thunderstorms.
• Do not dismantle the product.
• Do not clean with volatile liquids.