Beghelli H-PRO LED DALI Luminaire

Product Specifications

Brand: Beghelli

Model: H-PRO Riflettore LED DALI

Optic Type: Elliptical Optic

Certifications: UK CA, IK09, IP66

Operating Temperature: -30°C to 40°C

Weight: 7.7 kg

Wind Exposure Surface (S): 1755 cm²

Power Input: 230Vac 50/60Hz, 216Vdc

Product Codes: + cod. 12664, + cod. 12659, + cod. 12663, + cod. 12666

For further information and updates, scan the QR code on the product [QR code for product information].

Installation and Wiring

The luminaire requires careful installation. Refer to the diagrams for specific guidance.

Dimensions

• Length: 417 mm
• Width: 425 mm
• Other dimensions: 121 mm, 131 mm, 216 mm, 361.5 mm

Electrical Connections

The luminaire operates on 230Vac ±10% (50/60Hz) or 216Vdc ±20%.

Cable entry is via M20 glands suitable for Ø 6-12mm cables.

Wire gauge: 0.75 to 2.5 mm².

The luminaire is DALI compatible and features basic insulation.

Important: Re-tighten the safety screws after wiring [✔️].

Mounting Options

Various mounting accessories are available, indicated by product codes:

• Accessory 1: + cod. 12664
• Accessory 2: + cod. 12659
• Accessory 3: + cod. 12663
• Accessory 4: + cod. 12666

Diagrams illustrate different suspension and mounting configurations.

Note on Optical Direction: Ensure correct "Lane direction" for the elliptical optic [→].

Warnings and Guarantee Information

This device is designed for its intended purpose only. Any other use is considered improper and dangerous.

The LED source is not replaceable. For any repairs, contact an authorized technical service center and request the use of original spare parts. Failure to comply with these conditions may compromise the safety of the device.

This product contains a light source of energy efficiency class D.

Caution: Electric shock hazard [⚡].

The warranty covers defects in materials and workmanship under normal use. Refer to the full warranty terms provided by Beghelli.