Beghelli H-PRO LED Reflector 0-10
Manufacturer: Beghelli S.p.A.
Model: H-PRO LED Reflector 0-10
Electrical Specifications: 230Vac - 50/60Hz 216Vdc
Protection Ratings: IK09, IP66
Operating Temperature: -30°C <Ta<40°C
Product Overview and Dimensions
The Beghelli H-PRO LED Reflector is a lighting fixture designed for efficient illumination. It features an elliptical optic (OTTICA ELLITTICA) and is indicated for specific lane directions ("Senso corsia" / "Lane direction").
Dimensions: The fixture has a width of 417 mm and a depth of 425 mm. The height is approximately 121 mm, with mounting points for M20 cable glands (Ø 6-12mm) and screw fixings (2 x M5 screws for 361.5 mm spacing, 2 x M6 screws for 216 mm spacing).
Mounting Options: Various mounting accessories are available, indicated by product codes: + Code 12664, + Code 12659, + Code 12663, + Code 12666.
Wiring and Safety: Electrical connections are made via an M20 cable gland (Ø 6-12mm) for wires ranging from 0.75 to 2.5 mm². The power supply is rated for 230Vac ±10% and 216Vdc ±20%. A critical safety instruction is to ❗ Re-tighten the safety screws after wiring.
Physical Data:
- Weight (P): 7.7 kg
- Wind Exposed Surface Area (S): 1755 cm² (This indicates the surface area exposed to wind, relevant for outdoor or high-wind installations).
Dimming Control Methods
The H-PRO LED Reflector supports dimming via resistance, 0-10V signal, or PWM signal. Resistances for 3 dimming levels are supplied in the accessory bag. With the default 100KΩ resistance mounted, maximum performance as indicated in the catalog is achieved.
Supplied Resistances:
- 100KΩ (default setting for 100% output)
- 82.5KΩ (for approximately 82% output)
- 68KΩ (for approximately 68% output)
- 56.2KΩ (for approximately 56% output)
Dimming Tables:
Resistance Dimming:
| Resistance Value (kΩ) | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Work Power Percentage (%) | 0% | 10% | 20% | 30% | 40% | 50% | 60% | 70% | 80% | 90% | 100% |
0-10V Dimming:
| 0-10V Signal Value | 0V | 1V | 2V | 3V | 4V | 5V | 6V | 7V | 8V | 9V | 10V |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Work Power Percentage (%) | 0% | 10% | 20% | 30% | 40% | 50% | 60% | 70% | 80% | 90% | 100% |
PWM Dimming:
PWM Frequency Range: 100Hz ~ 3KHz
| PWM Duty Cycle (%) | 0% | 10% | 20% | 30% | 40% | 50% | 60% | 70% | 80% | 90% | 100% |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Work Power Percentage (%) | 0% | 10% | 20% | 30% | 40% | 50% | 60% | 70% | 80% | 90% | 100% |
Note on Dimming Percentage: The dimming percentage is relative to the maximum powers indicated in the product catalog.
0-10V and PWM Polarity:
- DIM+ : Blue wire
- DIM- : White wire
Warnings and Guarantee Information
General Safety and Usage:
- The light source contained in this luminaire shall only be replaced by the manufacturer, its service agent, or a similarly qualified person.
- This device must be used exclusively for the purpose for which it has been designed. Any other use is considered improper and therefore dangerous.
- For any repairs, contact an authorized technical service center and request the use of original spare parts. Failure to comply with the above conditions may compromise the safety of the device.
Energy Efficiency: This product contains a light source of energy efficiency class D.
Electrical Hazard: ⚠️ Caution: electric shock.
Lighting, LED, security systems
