Ryobi 40 Volt Brushless Blower
Model Numbers: RY404010VNM, RY404010CANVNM
Manufacturing Numbers: 108661001, 108661004
This document serves as a repair sheet and provides a detailed parts list for the Ryobi 40 Volt Brushless Blower.
Parts List
| KEY NO. | PART NO. | DESCRIPTION | QTY. | KEY NO. | PART NO. | DESCRIPTION | QTY. |
| 1 | 318194001 | Motor Controller and Inlet Bell Assembly | 1 | 18 | 543756001 | Cross-Hairs | 1 |
| 2 | 543748001 | Inlet Guard | 1 | 19 | 317856001 | Trigger and Cruise Control Assembly | 1 |
| 3 | 661817001 | Screw (M4 x 13.5 mm, T15 Torx Pan Hd.) | 18 | 20 | 760750001 | Signal Switch | 1 |
| 4 | 660203001 | Screw (M3 x 8 mm, Pan Hd.) | 6 | 21 | 699363001 | Spring | 1 |
| 5 | 318193001 | Grounding Strap Assembly | 1 | 22 | 760781001 | Push Switch | 1 |
| 6 | 318190001 | Housing Assembly (Inc. Key Nos. 17 & 26-31, R404010VNM) | 1 | 23 | 636095001 | Wave Washer (ID13.7 x OD19.2 x 0.3t) | 1 |
| 6 | 205765001 | Housing Assembly (Inc. Key Nos. 17 & 26-31, R404010CANVNM) | 1 | 24 | 635793001 | Flat Washer (ID13.5 x OD20 x 2t) | 1 |
| 7 | 318192001 | Stator Assembly | 1 | 25 | 940705583 | 40V HP BRUSHLESS Logo Label | 1 |
| 8 | 318191001 | Speed Nozzle Assembly | 1 | 26 | 941110030 | RYOBI 40V HP Logo Label | 1 |
| 9 | 318195001 | Blower Tube Assembly (Inc. Key No. 25) | 1 | 27 | 941110031 | WHISPER SERIES Logo Label | 1 |
| 10 | 678774009 | Flange Lock Nut (M6) | 1 | 941110099 | Data/Warning Label (RY404010VNM) | 1 | |
| 11 | 543752001 | Fan | 1 | 28 | 941110084 | Data/Warning Label (RY404010CANVNM) | 1 |
| 12 | 612854002 | Bushing | 1 | 29 | 941110033 | Icon Label | 1 |
| 13 | 660137001 | Screw w/Washer (M4 x 12 mm) | 4 | 30 | 941097124 | dB Label | 1 |
| 14 | 565463001 | Rubber Cap | 4 | 31 | 941097056 | QR Label | 1 |
| 15 | 742653002 | Motor | 1 | Not Shown: | |||
| 16 | 543754001 | Nose Cone | 1 | 998000561 | Operator's Manual | 1 | |
| 17 | 941110041 | Ingestion Icon Label | 1 |
Wiring Diagram
The wiring diagram illustrates the connections between the motor, motor controller, battery contact plate, signal switch, and push switch. Key components are labeled with their respective names and wire colors (black, red, blue, white) indicate the connections.
Components shown in the diagram:
- Motor
- Motor Controller
- Battery Contact Plate
- Ground Wire
- Signal Switch
- Push Switch
For detailed repair instructions and product information, please refer to the Operator's Manual (Part No. 998000561).
Manufacturer: TTI Outdoor Power Equipment, Inc.
Contact: P.O. Box 1288, Anderson, SC 29622 | 1-800-525-2579 | www.ryobitools.com
The model number and manufacturing location will be found on a label attached to the product. Always mention this information in all communications regarding this product and when ordering parts.
Document Revision: 1-4-22 (Rev:05)
