Ryobi PBLCS300 18 Volt 7-1/4 in. Brushless Circular Saw
Repair Sheet
Brand: RYOBI
Model No.: PBLCS300
Description: 18 Volt 7-1/4 in. Brushless Circular Saw
The model number and manufacturing location will be found on a label attached to the product. Always mention this information in all communications regarding this product and when ordering parts.
Contact Information:
ONE WORLD TECHNOLOGIES, INC.
P.O. Box 1288, Anderson, SC 29622
1-800-525-2579
Document Revision: 7-20-21 (Rev:02)
Parts List
| KEY NO. | PART NO. | DESCRIPTION | QTY. |
|---|---|---|---|
| 1 | 565802001 | Brushless Logo Badge | 1 |
| 2 | 661175001 | Screw (M4 x 34 mm,T20 Torx Hd.) | 3 |
| 3 | 660024044 | Screw (M4 x 16 mm,T20 Torx Hd.) | 8 |
| 4 | 204684002 | Housing Assembly (Inc. Key Nos. 1, 8, & 21-22) | 1 |
| 5 | 672552001 | Compression Spring | 1 |
| 6 | 541596001 | Safety Button | 1 |
| 7 | 693912001 | Blade Bolt | 1 |
| 8 | 941120659 | Warning Label | 1 |
| 9 | 204585002 | Edge Guide Assembly | 1 |
| 10 | 316545001 | Base Assembly | 1 |
| 11 | 670974003 | Nylon Insert Nut (M5) | 1 |
| 12 | 660145008 | Screw (M5 x 40 mm, T25 Torx Hd.) | 1 |
| 13 | 693616001 | Connect Rod | 1 |
| 14 | 659497001 | Depth Adjust Lever | 1 |
| 15 | 634295001 | E-Ring | 1 |
| 16 | 612031001 | Flange Nut | 1 |
| 17 | 560219006 | Contact Plate Stopper | 1 |
| 18 | 696071001 | Hex Key Wrench (#5, M6 x 31 mm x 74 mm) | 1 |
| 19 | 536252002 | Switch Trigger | 1 |
| 20 | 696072001 | Compression Spring (Switch Trigger) | 1 |
| 21 | 941120057 | Icon Label | 1 |
| 22 | 941123112 | Data Label | 1 |
| 23 | 660165011 | Screw (M4 x 12 mm,T20 Torx Hd.) | 4 |
| 24 | 206663002 | Motor and Circuit Board Assembly | 1 |
| 25 | 204687002 | Spindle Lock Assembly | 1 |
| 26 | 941120658 | Danger/Warning Label | 1 |
| 27 | 670056001 | Compression Spring (Spindle Lock) | 1 |
| 28 | 204686002 | Upper Guard Assembly (Inc. Key Nos. 26 & 32-33) | 1 |
| 29 | 561984001 | Rubber Bumper | 1 |
| 30 | 661245001 | Screw (M6 x 20 mm, T30 Torx) | 1 |
| 31 | 563468001 | Dust Cover | 1 |
| 32 | 565801001 | RYOBI Logo Badge | 1 |
| 33 | 941120656 | Blade Warning Label | 1 |
| 34 | 535383001 | Dust Port | 1 |
| 35 | 661923001 | Screw (M4 x 15 mm, T20 Torx Hd.) | 1 |
| 36 | 206656003 | Gear Box Assembly | 1 |
| 37 | 660165011 | Screw (M4 x 12 mm,T20 Torx Hd.) | 4 |
| 38 | 680672015 | Torsion Spring | 1 |
| 39 | 541117002 | Lower Guard | 1 |
| 40 | 693438001 | Retaining Ring | 1 |
| 41 | 611791001 | Inner Blade Clamp | 1 |
| 42 | 682142003 | Blade | 1 |
| 43 | 692092001 | Outer Flange | 1 |
Not Shown:
- 998000240: Operator's Manual (961153415)
Wiring Diagram
The wiring diagram illustrates the connections between the switch, battery contact plate, terminals, motor and circuit board assembly, and LED. Key components are labeled with their respective wire colors (WHITE, RED, BLACK).
Components and Connections:
- SWITCH: Connected to the MOTOR AND CIRCUIT BOARD ASSEMBLY via BLACK and RED wires.
- BATTERY CONTACT PLATE: Connected to the MOTOR AND CIRCUIT BOARD ASSEMBLY via RED and BLACK wires.
- TERMINALS: Connected to the MOTOR AND CIRCUIT BOARD ASSEMBLY via WHITE and RED wires.
- MICRO SWITCH: Connected to the MOTOR AND CIRCUIT BOARD ASSEMBLY via WHITE and RED wires.
- MOTOR AND CIRCUIT BOARD ASSEMBLY: Connected to the LED via WHITE and RED wires.
