Ryobi 18 Volt 7-1/4 in. Brushless Circular Saw
Model No.: PBLCS300
Repair Sheet
Brand: RYOBI
Description: 18 Volt 7-1/4 in. Brushless Circular Saw
Illustration of the Ryobi 18 Volt 7-1/4 in. Brushless Circular Saw
Manufacturer Information:
ONE WORLD TECHNOLOGIES, INC.
P.O. Box 1288, Anderson, SC 29622
1-800-525-2579
www.ryobitools.com
The model number and manufacturing location will be found on a label attached to the product. Always mention this information in all communications regarding this product and when ordering parts.
Date: 6-28-23 (Rev:04)
Parts List
| KEY NO. | PART NO. | DESCRIPTION | QTY. | KEY NO. | PART NO. | DESCRIPTION | QTY. |
|---|---|---|---|---|---|---|---|
| 1 | 565802001 | Brushless Logo Badge | 1 | 23 | 660165011 | Screw (M4 x 12 mm, T20 Torx Hd.) | 4 |
| 2 | 661175001 | Screw (M4 x 34 mm, T20 Torx Hd.) | 3 | CN-206663002 | Motor and Circuit Board Assembly | 1 | |
| 3 | 660024044 | Screw (M4 x 16 mm, T20 Torx Hd.) | 8 | VN-206663005 | Motor and Circuit Board Assembly | 1 | |
| CN-204684002 | Housing Assembly (Inc. Key Nos. 1, 8, & 21-22) | 1 | 24 | CN-204687002 | Spindle Lock Assembly | 1 | |
| 4 | VN-204684007 | Housing Assembly (Inc. Key Nos. 1, 8, & 21-22) | 1 | VN-204687003 | Spindle Lock Assembly | 1 | |
| 5 | 672552001 | Compression Spring | 1 | 25 | 941120658 | Danger/Warning Label | 1 |
| 6 | 541596001 | Safety Button | 1 | 26 | 670056001 | Compression Spring (Spindle Lock) | 1 |
| 7 | 693912001 | Blade Bolt | 1 | CN-204686002 | Upper Guard Assembly (Inc. Key Nos. 26 & 32-33) | 1 | |
| 8 | 941120659 | Warning Label | 1 | 27 | VN-204686003 | Upper Guard Assembly (Inc. Key Nos. 26 & 32-33) | 1 |
| CN-204585002 | Edge Guide Assembly | 1 | 28 | 561984001 | Rubber Bumper | 1 | |
| 9 | VN-204585003 | Edge Guide Assembly | 1 | 29 | 661245001 | Screw (M6 x 20 mm, T30 Torx) | 1 |
| CN-316545001 | Base Assembly | 1 | 30 | 563468001 | Dust Cover | 1 | |
| 10 | VN- 316545003 | Base Assembly | 1 | 31 | 565801001 | RYOBI Logo Badge | 1 |
| 11 | 670974003 | Nylon Insert Nut (M5) | 1 | 32 | 941120656 | Blade Warning Label | 1 |
| 12 | 660145008 | Screw (M5 x 40 mm, T25 Torx Hd.) | 1 | 33 | 535383001 | Dust Port | 1 |
| 13 | 693616001 | Connect Rod | 1 | 34 | 661923001 | Screw (M4 x 15 mm, T20 Torx Hd.) | 1 |
| 14 | 659497001 | Depth Adjust Lever | 1 | CN-206656003 | Gear Box Assembly | 1 | |
| 15 | 634295001 | E-Ring | 1 | 35 | VN-206656004 | Gear Box Assembly | 1 |
| 16 | 612031001 | Flange Nut | 1 | 36 | 660165011 | Screw (M4 x 12 mm, T20 Torx Hd.) | 4 |
| 17 | 560219006 | Contact Plate Stopper | 1 | 37 | 680672015 | Torsion Spring | 1 |
| 18 | 696071001 | Hex Key Wrench (#5, M6 x 31 mm x 74 mm) | 1 | 38 | 541117002 | Lower Guard | 1 |
| 19 | 536252002 | Switch Trigger | 1 | 39 | 693438001 | Retaining Ring | 1 |
| 20 | 696072001 | Compression Spring (Switch Trigger) | 1 | 40 | 611791001 | Inner Blade Clamp | 1 |
| CN-941120057 | Icon Label | 1 | 41 | 682142003 | Blade | 1 | |
| 21 | VN-941120657 | Icon Label | 1 | 42 | 692092001 | Outer Flange | 1 |
| CN-941123112 | Data Label | 1 | 43 | Not Shown: 998000240 | Operator's Manual (961153415) | ||
| 22 | VN-941124277 | Data Label | 1 |
Order Keys 4, 9-10, 21-22, 24-25, 28 & 36 based on correct Country of origin. CN and VN parts are not interchangeable for these parts.
Wiring Diagram
Illustration of the wiring connections for the Ryobi PBLCS300 Circular Saw.
Key Components:
- SWITCH (connected to BATTERY CONTACT PLATE via RED and BLACK wires)
- MICRO SWITCH (connected to MOTOR AND CIRCUIT BOARD ASSEMBLY via WHITE and RED wires)
- LED (connected to MOTOR AND CIRCUIT BOARD ASSEMBLY via WHITE and RED wires)
- TERMINALS (connected to BATTERY CONTACT PLATE)
Wire Colors:
- RED
- BLACK
- WHITE
