Ryobi 40 Volt HP 800 CFM Brushless Blower
Model No.: RY40HPLB01
Mfg. No.: 106003001
Repair Sheet
This document outlines the repair information for the Ryobi 40 Volt HP 800 CFM Brushless Blower.
Brand: Ryobi
Description: 40 Volt HP 800 CFM Brushless Blower
For any inquiries or parts orders, please contact TTI Outdoor Power Equipment, Inc. at P.O. Box 1288, Anderson, SC 29622, or call 1-800-525-2579. Visit their website at www.ryobitools.com.
Note: The model number and manufacturing location can be found on a label attached to the product. Always reference this information when communicating about or ordering parts for this product.
Parts List - Figure A
The following table details the components for Figure A:
Key No. | Part No. | Description | Qty. |
---|---|---|---|
1 | 554154001 | Tail Cone | 1 |
2 | 554153001 | Stator | 1 |
3 | 564887001 | Rubber Isolator | 2 |
4 | 660137001 | Screw (M4 x 12 mm) | 4 |
5 | 554152001 | Fan | 1 |
6 | 678774009 | Lock Nut (M6 x 1 mm) | 1 |
7 | 904735001 | Outlet Left Foam | 1 |
8 | 904733001 | Inlet Left Foam | 1 |
9 | 760777001 | Switch | 1 |
10 | 543749001 | Trigger | 1 |
11 | 553397001 | Cruise Control Lever | 1 |
12 | 636095001 | Wave Washer | 1 |
13 | 635793001 | Flat Washer | 1 |
14 | 543851001 | Actuator Trigger | 1 |
15 | 661817001 | Screw (T15, M4 x 13.5 mm) | 17 |
16 | 699936001 | Grounding Strap | 1 |
17 | 660290004 | Screw (M3) | 2 |
18 | 554155001 | Inlet Guard | 1 |
19 | 205857008 | Circuit Board Assembly | 1 |
20 | 663467001 | Screw (M3, T10) | 5 |
21 | 904734001 | Inlet Right Foam | 1 |
22 | 904736001 | Outlet Right Foam | 1 |
23 | 205634007 | Handle Assembly | 1 |
24 | 205634008 | Main Housing Assembly | 1 |
25 | 205634009 | Base Assembly | 1 |
26 | 205634010 | Blow Tube Assembly | 1 |
27 | 205634006 | Speed Tip Assembly | 1 |
28 | 205396004 | Motor Assembly | 1 |
29 | 205857007 | Common Foot & LED Board Assembly | 1 |
30 | 568634001 | Mode Button | 1 |
31 | 553395001 | Cover | 1 |
32 | 660201001 | Screw (M2.6 x 5 mm) | 1 |
Not Shown | 999000308 | Operator's Manual | 1 |
Parts List - Labels
The following table details the labels for the unit:
Key No. | Part No. | Description | Qty. |
---|---|---|---|
1 | 941263392 | Warning Trilingual Label | 1 |
2 | 941263492 | Whisper Logo Label | 1 |
3 | 941263490 | Icon Label | 1 |
4 | 941201180 | Logo Label | 1 |
5 | 940779892 | HP Brushless Label | 1 |
6 | 941110295 | Mode LED Label | 1 |
Wiring Diagram
The wiring diagram illustrates the electrical connections within the blower:
The diagram shows the following connections:
- Common Foot Assembly connected to the Circuit Board Assembly via RED and BLACK wires.
- A Ground Terminal connected to the Circuit Board Assembly.
- A Switch connected to the Circuit Board Assembly.
- An LED Board connected to the Circuit Board Assembly.
- A Motor connected to the Circuit Board Assembly via YELLOW and GREEN wires.
The components are labeled as: COMMON FOOT ASSEMBLY, GROUND TERMINAL, LED BOARD, SWITCH, CIRCUIT BOARD ASSEMBLY, and MOTOR.