GLOBO 15865-5 Lighting Fixture Installation

Step 1: Mounting Bracket Installation

Secure the mounting bracket to the ceiling using the provided screws (1). Ensure it is firmly attached.

Diagram A shows a terminal block for electrical connections. Ensure the power is OFF before proceeding.

Step 2: Attaching the Fixture Base

Connect the wires from the ceiling to the fixture's internal wiring. Diagram B illustrates the wire connections: Live (L), Neutral (N). Use the terminal block (3) for secure connections.

Attach the fixture base plate to the mounting bracket using screws (2) and (4). Rotate the fixture base to secure it.

Step 3: Hanging the Globes

Hang the individual globes by their suspension wires. Secure each globe by rotating them (5) until they are firmly in place.

Step 4: Installing the Light Bulb

Insert the light bulb into the socket. Rotate the bulb (6) to screw it in securely.

Step 5: Securing the Globes

Attach the decorative globe holders (7) to the fixture. Place the glass globes (8) onto the holders and secure them.

Step 6: Final Check and Power On

Ensure all connections are secure and all parts are properly installed. Diagram C shows the ON/OFF switch, indicating the fixture is ready for power.