GLOBO LIGHTING

Product Overview

This document provides assembly instructions for the GLOBO LIGHTING chandelier, models 64138H1S and 64138H1G. It details the steps required to safely and correctly assemble the lighting fixture.

Important: Please read all instructions carefully before beginning assembly. Ensure all parts are present and undamaged.

Assembly Steps

Step 1: Prepare Mounting and Canopy

Diagram A: Illustrates the ceiling mounting bracket. It shows a bracket designed to attach to the ceiling, featuring a rotational mechanism with labels "OFF" and "ON". This mechanism likely serves to lock the fixture in place or adjust its orientation.

Diagram B: Presents a close-up view of the chandelier's canopy. It indicates connection points labeled A, B, and C, which are used for electrical wiring and securing the suspension cables.

Step 2: Secure Mounting Bracket

Diagram 2: Shows the necessary hardware for mounting the bracket to the ceiling, including screws and wall plugs (anchors). It is crucial to use appropriate fixings suitable for the specific ceiling material.

Diagram 6: Depicts screws, which may be used for further securing the main fixture to the mounting bracket or for internal wiring connections.

Step 3: Attach Main Fixture Body

Diagram 5: Illustrates the process of connecting the main body of the chandelier to the suspension wires. The wires are guided through the ceiling canopy and then attached to the fixture's structure.

Step 4: Attach Decorative Elements

Diagram 1: Provides a detailed view of a decorative glass element and a screw. The notation "5x" indicates that five such elements are to be attached per point, and "x10" suggests there are ten attachment points or groups of points on the fixture.

Diagram 8: Shows the chandelier with its multiple arms. This diagram details the attachment of numerous decorative crystal elements. The label "x56" signifies that a total of 56 crystal elements are to be fitted onto the chandelier.

Step 5: Electrical Wiring

Diagram 4: Offers a close-up of the electrical wiring connections. This step involves connecting the fixture's wires to the household electrical supply, typically within a junction box. Proper electrical knowledge is required.

Step 6: Final Checks and Bulb Installation

Diagram 7: The label "excl." is displayed, indicating that light bulbs are not included with the fixture and must be purchased separately.

Technical Specifications

• Bulb Requirement: 8 x MAX 40W E14 bulbs.
• Voltage: 220-240V~ 50/60Hz.

Manufacturer Information

Company: GLOBO Handels GmbH

Address: Gewerbestrasse 3, A-9184 Sankt Peter, Austria

Website: www.globo-lighting.com

Email: office@globo-lighting.com