GuliKit KingKong 2 PRO Controller

Controller Layout and Indicators

The GuliKit KingKong 2 PRO Controller features several indicators and buttons for optimal use:

• Working Mode Indicator: Shows the current operational mode.
• USB-C Port: Used for charging and wired connection.
• Charging Indicator: Illuminates orange when charging and turns off when fully charged.
• Controller No. Indicator: Displays the assigned controller number.
• Pairing Button: Hold for 2 seconds to initiate pairing, indicated by a scrolling LED.
• Mode Button: Press for 2 seconds to switch modes. Double-click to shut down, single-click to power on. A flashing LED indicates low power.

The controller features standard gamepad buttons including A, B, X, Y, D-pad, Left and Right analog sticks, L, R, ZL, ZR shoulder buttons, and additional function buttons like Home, Plus (+), Minus (-), Gear (⚙️), and APG (?).

Pairing Instructions

Pair on Computer

Pair with Bluetooth (PC XINPUT Mode)

1. Hold the Mode button on the controller to switch it to PC XINPUT mode.
2. Press the Pairing button on the controller for 2 seconds to start pairing, indicated by a scrolling LED.
3. Go to the Bluetooth settings on your computer, search for new devices, choose "GuliKit Controller", and connect.
4. Pairing is completed once a successful connection to the new controller is shown.

Use with Wired Connection

Switch to the appropriate mode on the controller for your computer. Connect the controller and computer using a USB-C to USB-A cable. A USB-A port on the backside of a desktop computer is recommended.

Note: DINPUT is an older connection protocol on Windows, recommended for retro games or simulators. XINPUT mode is primarily used for new games on Windows.

Pair on Switch

Wireless Pairing

1. Go to the controller settings on your Nintendo Switch.
2. Press the Pairing button on the controller for 2 seconds to start pairing.
3. Pairing is completed once the Switch shows a successful connection to the new controller.

Wired Pairing via Dock

Place your Nintendo Switch into its dock and set the Switch to pairing mode. Connect the GuliKit controller to the Switch dock using a USB-A to USB-C cable. The Switch will automatically connect to the controller. After a few seconds, you can unplug the cable, and the Switch will remain wirelessly paired with the controller. The controller can also be used with the cable plugged in as a wired controller.

Pair Wireless on Android, iOS, macOS Devices

1. Hold the Mode button on the controller to switch it to Android iOS mode.
2. Press the Pairing button on the controller for 2 seconds to start pairing, indicated by a scrolling LED.
3. Go to the Bluetooth settings on your mobile phone or macOS device, search for new devices, choose "Xbox Wireless Controller", and connect.
4. Pairing is completed once a successful connection to the new controller is shown.

Calibration

Calibration on Sticks, ZL, ZR

When the controller is on, simultaneously press the L, R, A, and D-pad Left buttons to perform an auto-quick calibration on the sticks, ZL, and ZR triggers. A vibration will occur upon completion. Do not touch the sticks, ZL, or ZR during the process.

Calibration on Gyroscope

When the controller is on, place it on a tabletop. Simultaneously press the Plus (+), Minus (-), A, and D-pad Left buttons to perform an auto-quick calibration on the gyroscope. A vibration will occur upon completion.

Note: Gyroscope calibration is not necessary if there are no issues with its performance.

Auto Pilot Gaming (APG)

APG Button (?)

APG Activation: Press the APG button for 3 seconds to start recording. A long vibration will indicate recording has begun. The controller will record all inputs until the button is pressed again to stop recording, or until 10 minutes have passed, at which point it will auto-stop. A short vibration signifies recording completion. Operations can be recorded for up to 10 minutes.

Auto Pilot Gaming Playback:

• Single Playback: Click the APG button once to start the recorded operation.
• Continuous Playback: Double-click the APG button to run the recorded operation continuously.

During Auto Pilot Gaming, the analog sticks can still be operated. Any button press, except for stick movements, will stop Auto Pilot Gaming.

Advanced Controller Settings

All settings are configured by holding the Gear (⚙️) button and then pressing the relevant button combination. Settings are cleared by default upon restart under normal mode but can be saved under Professional Player Mode.

The controller automatically shuts down if there is no button action for 10 minutes. It wakes up by pressing any of the A, B, X, Y, Home, or Mode buttons. The controller will not shut down under modes of auto-repeated Turbo shooting, Auto-Pilot Gaming, or wired connection.