Comply with safety procedures and protect workers with the most user-friendly area monitor of its kind.
The Honeywell BW™ RigRat is designed for ease of use, allowing workers to operate it with confidence. It reliably alerts users to gas threats in their proximity, whether indoors or outdoors, across a wide temperature range of -40 to +140°F (-40 to +60°C). The BW™ RigRat offers:
- [8 weeks runtime] of runtime on a single charge, providing longer operation than other area monitors in its class.
- Up to six slots for interchangeable gas sensors, offering choices of electrochemical, PID, infrared, and catalytic bead sensors (measuring percent LEL and percent by volume).
- Integrated [Sound Wave Icon] Noise sensor and [Thermometer Icon] Metrological data sensors.
- Enhanced configurations with programmable input and output.
- Approval for explosive atmospheres, certified for ATEX/IECEx Zone 0 and CSA C1D1.
The device also features:
- [Versatile Applications] for zone declassification, turnarounds, confined space, routine maintenance, fence line monitoring, and more. It is available with a pump for remote sampling.
- [One-button Operation]: Simple grab-and-go functionality requiring no expertise.
- [Smartphone App] setup: An easy mobile app for managing alarm set points, calibration records, and other settings.
- [Enhanced Protection]: Alerts workers to nearby gas leaks, complementing personal detectors that only cover the immediate breathing zone.
FEATURES AND BENEFITS
WIRELESS SAFETY PERIMETER [Network Icon]
Position several Honeywell BW™ RigRat monitors to form a wireless safety perimeter.
REMOTE MONITORING [Monitor Icon]
Utilize Honeywell's remote monitoring software to view gas readings, location, and other data from any internet-connected device for fast, informed decisions. An optional noise sensor or meteorological sensor can be added.
HONEYWELL TOUCHPOINT™ PLUS COMPATIBLE [Device Icon]
Use with the Honeywell Touchpoint™ Plus controller for centralized visibility of Honeywell BW™ RigRat monitors and workers' personal detectors.
OTHER HONEYWELL BW™ RIGRAT FEATURES
- [Power Plug Icon] Line power for extended runtime in the field.
- [Ports Icon] I/O ports providing additional input capabilities and local executive activation.
- Large, easy-to-read display.
- [Leaf Icon] Inert mode that prevents alarm in normal ambient air.
- Rugged, weatherproof design, with an optional protective cage.
INSTRUMENT SPECIFICATIONS (TYPICAL)
| SPECIFICATION | DETAIL |
|---|---|
| MODEL NUMBER | BWRR100P/BWRR100D |
| SIZE | 15.8 x 11.4 x 18.5 in. / 40.0 x 29.0 x 47.0 cm |
| WEIGHT | 17.6 lb / 8 kg |
| GAS SENSOR SLOTS | Up to 6 |
| GAS SAMPLING METHOD | Pumped or diffusion |
| BATTERY | Rechargeable Li-ion battery (3.7V / 26.4 Ah) |
| CHARGING TIME | Less than 18 hours (when instrument is powered off) |
| RUNNING TIME | 8 weeks for low-power model; other models vary by configuration |
| KEYPADS | One-button operation and programming |
| DISPLAY | 3.5" 240 x 320 TFT color LCD with white LED backlight |
| ALARM | Red/yellow/green LED alarm; buzzer alarm 108 dBA @ 1 m; on-screen indication of alarm conditions |
| DATALOGGING | Complete gas sensors and instrument information for at least 4 months at one-minute intervals |
| WIRELESS | ISM license-free band: Bluetooth Low Energy Module (BT 4.2 / 5.0), 2.4 GHz (default); Mesh Module: IEEE 802.15.4 868 MHz/915MHz/2.4 GHz (optional); OR Wi-Fi Module: 802.11 b/g/n 2.4 GHz (optional) |
| RADIO MODULE & RANGE | Bluetooth Low Energy: RMBLEC, up to 16.4 ft. / 5 m; Mesh: RM900A, 984 ft. / 300 m (868-900 MHz) or RM2400, 492 ft. / 150 m (2.4 GHz); Wi-Fi: RMWIFIC, up to 164 ft. / 50 m; GPS receiver module: GPS L1 frequency (1575.42 MHz) (optional); Only with IEEE 802.15.4 868 MHz / 915MHz modem and WIFI |
| OUTDOOR LOCATION | IP65 for pumped models; IP67 for diffusion models |
| TEMPERATURE | -4 to +140°F (-20 to +60°C) for pumped models; -40 to +140°F (-40 to +60°C) for diffusion models |
| HUMIDITY | 5 - 95% RH (non-condensing) |
| SAFETY CERTIFICATIONS | cETLus Class I Division 1; Group A, B, C, D; T4; IEC EX/ATEX II 1G Ex ia da IIC T4 Ga. For LEL/IR/CO2 sensor installed: II 2G Ex ia da db IIC T4 Gb, 1G Ex ia da IIC T4 Ga |
| WIRELESS APPROVALS | FCC Part 15, IC, RE-D |
| ROHS (PENDING) | RoHS Complaint, Directive (EU) 2015/863 |
| NOISE SENSOR | 60-125 dBA range; (respond: 100 Hz to 8 kHz), 1 dB resolution; A-weighted 15 second equivalent level; updated every 5 seconds |
| EXTERNAL PORTS | SAFE AREA CHARGE PORT (AC CHG SAFE AREA): Battery charger input 6 VDC 3 A typical; connect to AC/DC adaptor. FIELD CHARGE (IS CHG HAZARDOUS): Intrinsically safe line power supply input or SolarPak to extend instrument runtime (low-power model only). RAEMet PORT (SERIAL): Port to RAEMet wind sensor (optional). ANALOG/SWITCH INPUT PORT (4-20 MA IN): 4-20 mA signal input, X1 channel/switch on/off signal input, X1 channel (optional). ON/OFF SWITCH OUTPUT (SWITCH): Max 20 V / 120 mA, SPDT Normal Open, X3 channels for external ports (optional). Refer to User Guide for complete details. |
SENSOR SPECIFICATIONS
| SENSOR | RANGE | RESOLUTION | TEMPERATURE RANGE |
|---|---|---|---|
| COMBUSTIBLE GASES (IR)* | 0-100% LEL / 0-100% vol. | 1% LEL / 0.1% vol. | -40 to +140°F / -40 to +60° C |
| COMBUSTIBLE GASES (LEL) | 0-100% LEL | 1% LEL | -40 to +140°F / -40 to +60° C |
| CARBON DIOXIDE (CO₂) | 0-5% vol. / 100 ppm | 0.01% vol. / 100 ppm | -4 to +131°F / -20 to +50° C |
| CARBON DIOXIDE (CO₂) (EXT. RANGE) | 0-100% vol. | 0.1% vol. | -4 to +131°F / -20 to +50° C |
| VOLATILE ORGANIC COMPOUNDS (VOC) | 0-2000 ppm | 0.1 ppm | -4 to +131°F / -20 to +50° C |
| CARBON MONOXIDE (CO) | 0-500 ppm | 1 ppm | -40 to +140°F / -40 to +60° C |
| CARBON MONOXIDE (CO) (EXT. RANGE) | 0-2000 ppm | 10 ppm | -4 to +131°F / -20 to +50° C |
| CARBON MONOXIDE (CO) (H₂ RESISTANT) | 0-1000 ppm | 5 ppm | -4 to +131°F / -20 to +50° C |
| HYDROGEN SUFLIDE (H₂S) | 0-100 ppm | 0.1 ppm | -40 to +140°F / -40 to +60° C |
| HYDROGEN SUFLIDE (H₂S) (EXT. RANGE) | 0-1000 ppm | 1 ppm | -4 to +131°F / -20 to +50° C |
| SULFUR DIOXIDE (SO₂) | 0-20 ppm | 0.1 ppm | -4 to +140°F / -20 to +60° C |
| OXYGEN (O₂) | 0-30% vol. | 0.1% vol. | -40 to +140°F / -40 to +60° C |
| NITRIC OXIDE (NO) | 0-250 ppm | 0.5 ppm | -4 to +131°F / -20 to +50° C |
| NITROGEN DIOXIDE (NO₂) | 0-20 ppm | 0.1 ppm | -40 to +140°F / -40 to +60° C |
| HYDROGEN CYANIDE (HCN) | 0-50 ppm | 0.5 ppm | -4 to +131°F / -20 to +50° C |
| AMMONIA (NH₃) | 0-100 ppm | 1 ppm | -4 to +131°F / -20 to +50° C |
| CHLORINE (CL₂) | 0-50 ppm | 0.1 ppm | -4 to +131°F / -20 to +50° C |
*Note: Temperature range for the Dynament Combustible IR sensor is -4 to +131°F (-20 to +50°C).
SolarPak BW™ RigRat (optional)
The Honeywell BW™ RigRat can be powered by the optional SolarPak BW™ RigRat. Certain monitor configurations may not provide continuous operation but offer a runtime extension. Please refer to the manual for details.
Description of SolarPak image: An optional SolarPak accessory for the Honeywell BW™ RigRat, depicted as a solar panel designed to extend the instrument's runtime in the field.
CERTIFICATION MARKINGS
- USA and Canada: Class I, Division 1, Groups A, B, C, D T4
- Europe: ATEX II 1 G Ex ia IIC T4 Ga -40°C ≤ Ta ≤ +60°C
- IECEx: Ex ia IIC T4 Ga -40°C ≤ Ta ≤ +60°C
