Comply with safety procedures and protect workers with the most user-friendly area monitor of its kind.
Honeywell BW™ RigRat is easy to use, allowing workers to operate it with confidence. It alerts them to gas threats in their proximity, indoors and out, in temperatures from -40 to +140°F (-40 to +60°C). The Honeywell BW™ RigRat delivers:
- Up to 8 weeks of runtime on a single charge, offering longer runtime than any area monitor in its class.
- Up to six slots for interchangeable gas sensors, supporting electrochemical, PID, infrared, and catalytic bead sensors (measuring percent LEL and percent by volume).
- Integrated Noise sensor and Metrological data sensors.
- Enhanced configurations with programmable input and output.
- Approval for explosive atmosphere, certified for ATEX/IECEx Zone 0 and CSA C1D1.
- Flexible applications including zone declassification, turnarounds, confined space, routine maintenance, and fence line monitoring. Available with a pump for remote sampling.
- One-button operation for grab-and-go use with no expertise required.
- Simple setup with a smartphone via an easy mobile app for alarm set points, calibration records, and more.
- Added protection by alerting workers to nearby gas leaks, complementing personal detectors that cover only the breathing zone.
FEATURES AND BENEFITS
WIRELESS SAFETY PERIMETER
Position several Honeywell BW™ RigRat monitors to form a wireless safety perimeter.
REMOTE MONITORING
Use with Honeywell's remote monitoring software to view gas readings, location, and other data from any internet-connected device for fast, informed decisions. An optional noise sensor or meteorological sensor can be added.
HONEYWELL TOUCHPOINT™ PLUS COMPATIBLE
Use with the Honeywell Touchpoint™ Plus controller for visibility on Honeywell BW™ RigRat monitors and workers' personal detectors.
OTHER HONEYWELL BW™ RIGRAT FEATURES:
- Line power for extended runtime in the field.
- Inert mode that prevents alarm in normal ambient air.
- I/O ports providing additional input capabilities and local executive activation.
- Rugged, weatherproof design, with an optional protective cage.
- Large, easy-to-read display.
INSTRUMENT SPECIFICATIONS (TYPICAL)
| MODEL NUMBER | BWRR100P/BWRR100D |
|---|---|
| SIZE | 15.8 x 11.4 x 18.5 in. / 40.0 x 29.0 x 47.0 cm |
| WEIGHT | 17.6 lb / 8 kg |
| GAS SENSOR SLOTS | Up to 6 |
| GAS SAMPLING METHOD | Pumped or diffusion |
| BATTERY | Rechargeable Li-ion battery (3.7V / 26.4 Ah) |
| CHARGING TIME | Less than 18 hours when instrument is powered off |
| RUNNING TIME | 8 weeks for low-power model; other models vary by configuration |
| KEYPADS | One-button operation and programming |
| DISPLAY | 3.5" 240 x 320 TFT color LCD with white LED backlight |
| ALARM | Red/yellow/green LED alarm; buzzer alarm 108 dBA @ 1 m; on-screen indication of alarm conditions |
| DATALOGGING | Complete gas sensors and instrument information for at least 4 months at one-minute intervals |
| WIRELESS | ISM license free band: Bluetooth Low Energy Module (BT 4.2 / 5.0), 2.4 GHz, in default; Mesh Module: IEEE 802.15.4 868 MHz/915MHz/2.4 GHz (optional); OR Wi-Fi Module: 802.11 b/g/n 2.4 GHz (optional) |
| RADIO MODULE & RANGE | Bluetooth Low Energy: RMBLEC, up to 16.4 ft. / 5 m; Mesh: RM900A, 984 ft. / 300 m (868-900 MHz) or RM2400, 492 ft. / 150 m (2.4 GHz ); Wi-Fi: RMWIFIC, up to 164 ft. / 50 m; GPS receiver module: GPS L1 frequency (1575.42 MHz) (optional); Only with IEEE 802.15.4 868 MHz / 915MHz modem and WIFI |
| OUTDOOR LOCATION | IP65 for pumped models; IP67 for diffusion models |
| TEMPERATURE | -4 to +140°F (-20 to +60°C) for pumped models; -40 to +140°F (-40 to +60°C) for diffusion models |
| HUMIDITY | 5 - 95% RH (non-condensing) |
| SAFETY CERTIFICATIONS | cETLus Class I Division 1; Group A, B, C, D; T4; IEC EX/ATEX II 1G Ex ia da IIC T4 Ga; For LEL/IR/CO2 sensor installed: II 2G Ex ia da db IIC T4 Gb; 1G Ex ia da IIC T4 Ga |
| WIRELESS APPROVALS | FCC Part 15, IC, RE-D |
| ROHS (PENDING) | RoHS Complaint, Directive (EU) 2015/863 |
| NOISE SENSOR | 60-125 dBA range; (respond: 100 Hz to 8 kHz), 1 dB resolution; A-weighted 15 second equivalent level; updated every 5 seconds |
| EXTERNAL PORTS |
|
SENSOR SPECIFICATIONS
| SENSOR | RANGE | RESOLUTION | TEMPERATURE RANGE |
|---|---|---|---|
| COMBUSTIBLE GASES (IR)* | 0-100% LEL / 0-100% vol. | 1% LEL / 0.1% vol. | -40 to +140°F / -40 to +60° C |
| COMBUSTIBLE GASES (LEL) | 0-100% LEL | 1% LEL | -40 to +140°F / -40 to +60° C |
| CARBON DIOXIDE (CO₂) | 0-5% vol. / 100 ppm | 0.01% vol. / 100 ppm | -4 to +131°F / -20 to +50° C |
| CARBON DIOXIDE (CO₂) (EXT. RANGE) | 0-100% vol. | 0.1% vol. | -4 to +131°F / -20 to +50° C |
| VOLATILE ORGANIC COMPOUNDS (VOC) | 0-2000 ppm | 0.1 ppm | -4 to +131°F / -20 to +50° C |
| CARBON MONOXIDE (CO) | 0-500 ppm | 1 ppm | -40 to +140°F / -40 to +60° C |
| CARBON MONOXIDE (CO) (EXT. RANGE) | 0-2000 ppm | 10 ppm | -4 to +131°F / -20 to +50° C |
| CARBON MONOXIDE (CO) (H₂ RESISTANT) | 0-1000 ppm | 5 ppm | -4 to +131°F / -20 to +50° C |
| HYDROGEN SUFLIDE (H₂S) | 0-100 ppm | 0.1 ppm | -40 to +140°F / -40 to +60° C |
| HYDROGEN SUFLIDE (H₂S) (EXT. RANGE) | 0-1000 ppm | 1 ppm | -4 to +131°F / -20 to +50° C |
| SULFUR DIOXIDE (SO₂) | 0-20 ppm | 0.1 ppm | -4 to +140°F / -20 to +60° C |
| OXYGEN (O₂) | 0-30% vol. | 0.1% vol. | -40 to +140°F / -40 to +60° C |
| NITRIC OXIDE (NO) | 0-250 ppm | 0.5 ppm | -4 to +131°F / -20 to +50° C |
| NITROGEN DIOXIDE (NO₂) | 0-20 ppm | 0.1 ppm | -40 to +140°F / -40 to +60° C |
| HYDROGEN CYANIDE (HCN) | 0-50 ppm | 0.5 ppm | -40 to +140°F / -40 to +60° C |
| AMMONIA (NH₃) | 0-100 ppm | 1 ppm | -4 to +131°F / -20 to +50° C |
| CHLORINE (CL₂) | 0-50 ppm | 0.1 ppm | -4 to +131°F / -20 to +50° C |
*Note: Temperature range for the Dynament Combustible IR sensor is -4 to +131°F (-20 to +50°C).
SolarPak BW™ RigRat (optional)
The Honeywell BW™ RigRat can be powered by the SolarPak BW™ RigRat. Certain monitor configurations will not provide continuous operation but only a run time extension. Please refer to the manual for details.
CERTIFICATION MARKINGS
- USA and Canada: Class I, Division 1, Groups A, B, C, D T4
- Europe: ATEX II 1 G Ex ia IIC T4 Ga -40°C ≤ Ta ≤ +60°C
- IECEx: Ex ia IIC T4 Ga -40°C ≤ Ta ≤ +60°C
