Contact Information
Question about your product? We're here to help. Contact us by:
? 707-392-8405 | ✉️ support@royalcraft.store | ? www.royalcraft.store
- ? Orders FAQ
- ?️ Product Assembly
- ❓ Product Inquiry
- ? Chat Support
- ? Returns & Refunds
If you have any problems, please send your order number and photos to us. We will contact you within 24 hours and provide you with a satisfactory solution.
Notice
⚠️ Please retain these instructions for future reference.
- Carefully unpack all the components and verify that all the necessary parts are included as listed in the packaging.
- Identify each component and refer to the provided assembly diagram or step-by-step instructions.
- Assemble the furniture in the order specified to ensure proper alignment and fit.
- Use the provided tools or recommended tools for assembly. Do not use excessive force when tightening screws or bolts.
- If any difficulties arise during assembly, consult the troubleshooting section or contact our customer support.
Assembly Instructions Overview
Assembly requires: ??? 2 people | ? Phillips Screwdriver
Parts List
- 01 Left Side Panel (1 PC)
- 02 Right Side Panel (1 PC)
- 03 Top Panel (1 PC)
- 04 Bottom Panel (1 PC)
- 05 Partition Panel (1 PC)
- 06 Shelf Panel (2 PCS)
- 07 Back Panel (2 PCS)
- 08 Left Door Panel (1 PC)
- 09 Right Door Panel (1 PC)
- 10 U-Shaped Metal Bracket (1 PC)
- 11 Back panel support lid (1 PC)
Hardware List
- A: Ø6x35mm Cam Bolt (4 PCS)
- B: Ø15x10mm Cam Lock (4 PCS)
- C: Ø6x30mm Dowel (10 PCS)
- D: Ø4x35mm Screw (4 PCS)
- E: Ø3x12mm Screw (22+1 PCS)
- F: Ø3x14mm Screw (4 PCS)
- G: Shelf Support (8 PCS)
- H: M4x16mm Handle Bolt (2 PCS)
- I: Hold Hands (2 PCS)
- J: Magnetic Plate (2 PCS)
- K: Ø2.5x12mm Screw (14+1 PCS)
- L: Wallmount Plate (2 PCS)
- M: Expansion Screw (2 PCS)
- N: Ø4x40mm Screw (2 PCS)
- O: Ø3x14mm Screw (2 PCS)
- P: Magnetic Door Plate (1 PC)
- Q: Three Folding Hing (4 PCS)
- R: Furniture Pad (2 PCS)
- S: Hole Cover Pad (4 PCS)
Assembly Steps
STEP 1
Please tighten the screws after completing all installation.
Description: Attach part 1 and part 2 using hardware A (x4), O (x2), P (x1), E (x10), H (x2), I (x2), J (x2), Q (x4). The diagram shows the initial assembly of the base and side panels, with specific hardware points indicated.
STEP 2
Please tighten the screws after completing all installation.
Description: Connect part 5 to part 1 and part 2 using hardware B (x2), C (x6), D (x4), and S (x2). The diagram illustrates the insertion of dowels (C) and screws (D) into pre-drilled holes, securing the partition panel (5) between the side panels (1, 2). Hardware B (cam locks) and S (hole covers) are also shown.
STEP 3
Please tighten the screws after completing all installation.
Description: Assemble the main cabinet structure. Attach the back panel support lid (11) to the top of the cabinet using hardware C (x2), B (x2), and S (x2). Secure the back panel (7) to the cabinet frame using hardware F (x4), K (x14), L (x2), and S (x2). The diagram shows the back panel being attached to the side panels and partition, and the support lid being fitted at the top.
STEP 4
Please tighten the screws after completing all installation.
Description: Attach the doors. Use hardware E (x8) and G (x8). The diagram shows the left door (8) and right door (9) being attached to the cabinet frame. Hardware E (screws) are used for hinges, and G (shelf supports) are shown being inserted into the cabinet interior, likely for shelves.
STEP 5
Please tighten the screws after completing all installation.
Description: Attach the U-shaped metal bracket (10) to the bottom of the cabinet using hardware E (x4). An alternative assembly method is shown for making the product stand on the ground, using hardware L (x2).
STEP 6
Please tighten the screws after completing all installation.
Description: Wall mounting. Use hardware M (x2) and N (x2). The diagram shows the process of attaching the cabinet to the wall using expansion screws (M) and screws (N). It explicitly states "Wall fixings not supplied."
Maintenance and Care
Prevent Moisture Damage: Safeguard your laminate furniture by keeping it in a dry environment. Store the furniture away from damp areas and water sources.
Sunlight Shielding: Shield your laminate furniture from direct sunlight to prevent color fading and surface deterioration. Consider using curtains or blinds for protection, especially if direct sunlight exposure is unavoidable.
Regular Care: Maintain your laminate furniture's appearance by gently wiping surfaces with a damp cloth. Avoid using overly wet cloths or abrasive cleaning tools.
Avoid Scratches: Protect the furniture surface from scratches by refraining from placing sharp or hard objects on it. When moving the furniture, be cautious not to scrape the legs against the floor.
Proper Weight Distribution: Prevent structural damage by placing heavy objects on stable support surfaces rather than directly on the laminate furniture's surface. This simple step can prolong the life of your furniture.
Warranty Information
Warranty Coverage: Our warranty provides protection against manufacturing defects in materials and workmanship for a specified period from the date of purchase, as outlined in the accompanying warranty documentation.
Exclusions: The warranty does not cover damages resulting from misuse, negligence, accidents, normal wear and tear, unauthorized repairs or modifications, improper assembly, or failure to adhere to the care and maintenance guidelines provided.
Share Your Space
We love to see where our furniture ends up! Snap a pic and tag us on Instagram or Facebook for your chance to be featured on our social channels and WIN A PRIZE.
Follow us: @royalcrafthome