SALTO Neo Europe or UK Profile Cylinder PANIC Function
INSTALLATION GUIDE
The SALTO Neo European cylinder is specifically designed to fit most Euro doors equipped with a European profile cylinder mortise lock.
Model: ELECTRONIC INFO. NOM - N1M - N0J
Certification: SKG
Standard: EN15684:2021 16 B4AD3D
Series: N x E1 1...A series, N x E2 1...A
Copyright © 2025 Salto Systems, S.L.
PANIC FUNCTION
The cylinder features a mechanism that ensures the cylinder cam resets to a position where it does not interfere with the lock operation. This is crucial for the PANIC FUNCTION.
Diagram showing the cylinder cam orientation for PANIC FUNCTION A, with angles indicated at 12h and 120°.
Key Components
Diagrams labeled E1 and E2 illustrating internal cylinder components.
Related Products/Information
Knob Security Screw Other Knobs
For more information, CLICK HERE.
Recommended Batteries
SALTO Recommended Batteries: SP01926-5
Tools and Parts (Not Included)
- Screwdriver: PH2 (x1)
- Measurement: 2.5 mm
- Part Number: SP225542 (likely a tool)
Important Warnings
⚠️ Danger for electronic components due to electrostatic discharge.
Installation Steps
Step 1: Prepare Cylinder Components
Diagram 1.1: Attaching a bracket to the cylinder body.
Diagram 1.2: Inserting the battery compartment into the cylinder.
Step 2: Insert Batteries
Diagram showing the battery compartment. One illustration shows correct battery polarity (+/-) with a green checkmark ✔️. Another shows incorrect polarity with a red cross ❌.
Step 3: Secure Component
Diagram showing a component being pushed into place, with the text "Push!"
Step 4: Engage Lock Mechanism
Diagram showing the lock mechanism engaging with an audible "click!" sound. A padlock icon ? is displayed.
Step 5: Install Cylinder into Lock Case
Diagram showing the cylinder being inserted into a lock case. A measurement of 2.5 mm is indicated.
Step 6: Measure Door and Select Cylinder Length
Diagram illustrating how to measure door thickness (Li, Le) and determine the correct cylinder length (Max. Le+3, Min. Le).
Step 7: Install Cylinder into Door
Diagram showing the cylinder installed in a door. A maximum door thickness of 70mm (dd) is indicated. A note states: If dd > 70mm: L screw = backset + 5mm.
Requires PH2 screwdriver.
Step 8: Program Cylinder Before Closing Door
Diagram showing the cylinder installed in the door. A critical instruction is displayed in multiple languages: "AT THIS POINT DO NOT CLOSE THE DOOR PROGRAM THE CYLINDER FIRST".
Battery Change Procedure
Follow these steps to replace the batteries:
Step 1: Remove Old Batteries
Diagram showing the removal of old batteries from the compartment. Red crosses ❌ indicate incorrect handling or conditions.
Ensure batteries are handled in DRY conditions: DRY! TROCKEN! DROG! SECO! ASCIUTTO! SEC! 干式.
Step 2: Insert New Batteries
Diagram showing the insertion of new batteries into the compartment.
Step 3: Reassemble Battery Compartment
Diagram showing the battery compartment being reassembled.
Step 4: Finalize Battery Installation
Diagram 4.1: Battery compartment secured with recommended SALTO batteries (SP01926-5).
Diagram 4.2: Shows the cylinder's electronic interface with indicator lights and audible "BEEP BEEP BEEP" signals.
Final Assembly Steps
Step 5: Re-insert Cylinder
Diagram showing the cylinder being inserted into the lock mechanism again.
Step 6: Complete Lock Assembly
Diagram showing the final assembly of the lock components.
Step 7: Programming/Maintenance
Icon depicting a wrench and clock ⚙️⏱️, indicating a step related to programming or maintenance.
Installation and Use Recommendations
Reader Proximity Warning
Illustration showing the outer knob, door, and the reader area. A warning is displayed: "Do not place any movable metallic object closer than 5cm in front of the reader."
Distance: >5cm
Screw Torque
Maximum recommended torque: 3.5 Nm.
Knob Pairing
Status: Paired!
The knob is uniquely paired to the cylinder and will not function if switched with a different SALTO cylinder.
saltosystems.com
