JBC CC2002 Cable Collector for NANO Stations

Packing List

The following items are included with the CC2002 Cable Collector:

• Cable collector for NANO Stations - 1 unit
• Allen Key 1,5 mm - 1 unit (Ref. 0741610)
• Manual - 1 unit (Ref. 0025685)

Tool Stand Assembly

The CC2002 Cable Collector attaches to the tool stand. The assembly process involves the following steps:

Step 1: Insert the base component of the tool stand into the designated slot on the NAE Control Unit's tool holder.

Step 2: Connect the arm of the cable collector to the assembled base.

Step 3: Secure the assembly by inserting and tightening a screw.

Tool Stand Replacement

To replace the tool stand for the CC2002 Cable Collector:

Step 1: Loosen the screw that secures the current tool stand.

Step 2: Withdraw the old tool stand from its mounting.

Step 3: Insert the new tool stand into the mounting position.

Step 4: Tighten the screw to securely fasten the new tool stand.

These operations are performed on the NAE Control Unit.

Specifications

Product: CC2002 Cable Collector for NANO Stations

Reference: CC2002

• Net Weight: 42 g / 0.09 lb
• Dimensions (L x W x H): 339 x 73 x 35 mm (13.35 x 2.87 x 1.38 in)
• Package Dimensions / Weight (L x W x H): 235 x 40 x 40 mm / 70 g (9.25 x 1.57 x 1.57 in / 0.15 lb)

Complies with CE standards.

ESD safe.

Warranty and Disposal

Warranty: JBC provides a 2-year warranty covering manufacturing defects, including replacement of defective parts and labor. The warranty does not cover product wear or misuse. For warranty claims, the equipment must be returned postage paid to the dealer where it was purchased.

Disposal: This product must not be disposed of with general household waste. In accordance with European directive 2012/19/EU (WEEE), electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.

Compliance Marks: CE, EAC