VIZIO Universal Remote Setup

This guide provides simple instructions for programming your VIZIO Universal Remote Control. Follow these steps to connect your remote to your TV or other devices.

1. Turn on the TV or device you wish to control.
2. Press and hold the device button (e.g., TV) on the remote for 5 seconds until the LED indicator lights up.
3. Locate the correct programming code for your device from the provided list. Enter the code using the remote's number buttons. The LED will flash once after each digit entry and twice after the last digit if the code is accepted.
4. Point the VIZIO remote at your device and press the POWER button. If the device turns off, the setup is successful. If not, repeat the process with a different code from the list.

For more detailed programming instructions specific to your remote model, please visit the VIZIO support page.