Virsma Step Light Installation Instructions
Brand: HAVIT Lighting
Product Specifications
| Model No. | Name | Material | Colour | IP Rating | Input Voltage | Protection Class | Lamp Base | Lamp Wattage | Colour Temp | Lumens | CRI | Wiring | Dimmable | Warranty |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HV3275T-BLK-240V | Virsma | Aluminium | Black | IP54 | 240v AC | (Requires Earth) | Built in LED | 1x 6w | TRI Colour - 3000k, 4000k, 5500k | 200lm, 210lm, 220lm | > 80 | Parallel | No | 3 Years Replacement* |
| HV3275T-WHT-240V | Virsma | Aluminium | White | IP54 | 240v AC | (Requires Earth) | Built in LED | 1x 6w | TRI Colour - 3000k, 4000k, 5500k | 200lm, 210lm, 220lm | > 80 | Parallel | No | 3 Years Replacement* |
| HV3276T-BLK-240V | Virsma | Aluminium | Black | IP54 | 240v AC | (Requires Earth) | Built in LED | 1x 4w | TRI Colour - 3000k, 4000k, 5500k | 110lm, 115lm, 120lm | > 80 | Parallel | No | 3 Years Replacement* |
| HV3276T-WHT-240V | Virsma | Aluminium | White | IP54 | 240v AC | (Requires Earth) | Built in LED | 1x 4w | TRI Colour - 3000k, 4000k, 5500k | 110lm, 115lm, 120lm | > 80 | Parallel | No | 3 Years Replacement* |
| HV3277T-BLK-240V | Virsma | Aluminium | Black | IP54 | 240v AC | (Requires Earth) | Built in LED | 1x 6w | TRI Colour - 3000k, 4000k, 5500k | 200lm, 210lm, 220lm | > 80 | Parallel | No | 3 Years Replacement* |
| HV3277T-WHT-240V | Virsma | Aluminium | White | IP54 | 240v AC | (Requires Earth) | Built in LED | 1x 6w | TRI Colour - 3000k, 4000k, 5500k | 200lm, 210lm, 220lm | > 80 | Parallel | No | 3 Years Replacement* |
| HV3275T-BLK-12V | Virsma | Aluminium | Black | IP54 | 12v DC | (Low Voltage) | Built in LED | 1x 6w | TRI Colour - 3000k, 4000k, 5500k | 200lm, 210lm, 220lm | > 80 | Parallel | No | 3 Years Replacement* |
| HV3275T-WHT-12V | Virsma | Aluminium | White | IP54 | 12v DC | (Low Voltage) | Built in LED | 1x 6w | TRI Colour - 3000k, 4000k, 5500k | 200lm, 210lm, 220lm | > 80 | Parallel | No | 3 Years Replacement* |
| HV3276T-BLK-12V | Virsma | Aluminium | Black | IP54 | 12v DC | (Low Voltage) | Built in LED | 1x 4w | TRI Colour - 3000k, 4000k, 5500k | 110lm, 115lm, 120lm | > 80 | Parallel | No | 3 Years Replacement* |
| HV3276T-WHT-12V | Virsma | Aluminium | White | IP54 | 12v DC | (Low Voltage) | Built in LED | 1x 4w | TRI Colour - 3000k, 4000k, 5500k | 110lm, 115lm, 120lm | > 80 | Parallel | No | 3 Years Replacement* |
| HV3277T-BLK-12V | Virsma | Aluminium | Black | IP54 | 12v DC | (Low Voltage) | Built in LED | 1x 6w | TRI Colour - 3000k, 4000k, 5500k | 200lm, 210lm, 220lm | > 80 | Parallel | No | 3 Years Replacement* |
| HV3277T-WHT-12V | Virsma | Aluminium | White | IP54 | 12v DC | (Low Voltage) | Built in LED | 1x 6w | TRI Colour - 3000k, 4000k, 5500k | 200lm, 210lm, 220lm | > 80 | Parallel | No | 3 Years Replacement* |
Product Dimensions and Mounting
HV3275 Dimensions
The HV3275 model is a rectangular step light. Its dimensions are: Length 200mm, Width 90mm, and Depth 37mm.
HV3276 Dimensions
The HV3276 model is a square step light. Its dimensions are: Length 148mm, Width 148mm, and Depth 37mm.
HV3277 Dimensions
The HV3277 model is a round step light. Its dimensions are: Diameter 148mm, and Depth 37mm.
HV3275 Mounting Base
The mounting base for the HV3275 is rectangular with overall dimensions of approximately 145mm x 61.5mm. It features two Ø5mm mounting holes and a central cable entry point.
HV3276 Mounting Base
The mounting base for the HV3276 is square with overall dimensions of approximately 145mm x 61.5mm. It features two Ø5mm mounting holes and a central cable entry point.
HV3277 Mounting Base
The mounting base for the HV3277 is circular with a diameter of approximately 145mm. It features two Ø5mm mounting holes and a central cable entry point.
Important Safety Issues
- This product must be installed by a qualified electrician according to AS/NZS 3000.
- Ensure all electrical mains are disconnected before any installation.
- Modification of this product will void any warranty.
- Havit Lighting does not take responsibility for wrong installation, incorrect use, or use of installation material that does not belong to the system.
- When installing low voltage fittings, Voltage to fitting must be within +or- 5% of voltage required and cannot be installed more than 25m from LED Driver, if not within this allowance warranty will be voided.
- Aluminium and 304SS fittings must not be installed within 5km of any salt water environments.
- All o-rings and seals must be in place correctly to maintain warranty.
- These instructions may be updated at any time due to product improvements. Please visit website for most current installation instructions.
Steps for Installation
- Make sure that the electrical circuit is free of voltage (master switch off).
- Loosen allen screws on side of fitting and remove face and set aside.
- Install base plate to wall in desired location. Seal all holes including Cable entry and Mounting screws.
- For 240v Models, use wire with earth; connect the earth first, then live and neutral wire.
- For 12v DC Models: Using an appropriate 12v DC LED Driver - DO NOT CONNECT LIGHT FITTING DIRECTLY TO 240V.
- Connect the cable. If more than one fitting installed, wiring must be done in parallel.
- Fitting is preset to 3000k; to change, slide switch to desired colour temperature.
- Reattach face to base plate, making sure allen screws are tight to avoid water penetration.
- Apply silicon around edge of fitting to prevent any water from getting inside to electrical connections.
- All connections must be carried out carefully; inspect all contacts before switching back on the electric circuit.
Contact and Warranty Information
Contact Details
Address: 143 Beauchamp Road, Matraville NSW 2036, Australia
Tel: 02 9381 8300
Fax: 02 9666 8881
Email: sales@havit.com.au
Web: www.havit.com.au
Warranty Terms & Conditions
3 Years Replacement*
Must be installed by a licensed electrician.
Additional Information
Please refer to the website for the most current installation instructions and warranty details.
