HLS3500+ Product Manual

Overview

The HLS3500+ is a home luxury scent diffuser designed for creating a pleasant aromatic experience.

Key Components:

• DC connector
• Lifting handle
• Nozzle
• Diffuser head
• Hanging hole
• Bottle
• Face cover
• Power indicator light
• Bluetooth indicator port
• Reset button

Specification

• Model: HLS3500+
• Size: 288*125*233mm
• Bottle Capacity: 850ml
• Power Adapter Input: 100-240V~50/60Hz 1.0A
• Power Adapter Output: 12V-2.0A
• Input Power: 12V-2.0A
• Power Consumption: 12W
• Coverage: 800m²/2400m³/84753.6ft³
• Net Weight: 2.314kg
• Material: Plastic

Important Usage Notes:

• Do not mix the fragrance with any other liquid.
• Do not remove any piece or part of the diffuser.
• This diffuser is only for use with Home Luxury Scents Scent Collection.

Installation

How to install the expansion anchors?

1. Aim at the position of the mounting bracket, then drill the hole in the wall and insert the expansion bolts into the hole in the wall.
2. Install the mounting bracket on the wall with screws, and finally hang the machine on the mounting bracket.

Installation Steps:

1. Drill into the wall, insert the expansion anchors into the hole, then place the screw into the expansion anchors and tighten it.
2. Install the mounting bracket on the wall with screws, and finally hang the machine on the mounting bracket.

Usage of sealing tape:

1. Before replacing the atomizing core, wrap sealing tape around the atomized core thread about 3-5 turns to avoid air leakage.
2. Before connecting the atomized connector, wrap sealing tape around the atomized connector thread about 3-5 turns to avoid air leakage.

Bluetooth Instruction

Where to get the app:

Please search "Home Luxury Scents" in Google Play or the App Store.

Notes for Bluetooth connection:

• Please make sure that the Bluetooth function is turned on.
• Please make sure that the location function of the mobile phone is turned on.

Device Pairing:

Search for the device and enter the password (factory default password is 8888).

Device Control:

Users can set the working period, adjust the concentration grade, and manage device settings through the app.

Amend Password:

Users can change the device password through the app.

Concentration and Consumption

The table below outlines different concentration grades (G1-G20) and their corresponding work time, stop time, and consumption rate.

Note:

• The data shown above was obtained based on testing essential oil.
• The consumption rate of different essential oils varies; the above data is only for reference, the actual data may prevail.

Instruction

Setup Steps:

1. Remove the top cover, then take out the atomized head and bottle.
2. Rotate the bottle cap counterclockwise to remove it, then pour in the essential oil.
3. Tighten the bottle cap by turning it clockwise.
4. Place the atomized head and bottle back into the machine.
5. Close the cover (magnetic adsorption).

Direction for Use

Ideal for Hotels, Conference rooms, Malls, Exhibition halls, Major retailers, Bars, SPAS, Business places, or anywhere you want a fragrance experience.

Warning

• Please read the user manual before operation and maintenance.
• Keep the machine vertical; laying flat may cause oil overflow.
• Make sure the machine is without essential oil inside the bottle before transportation.
• Tighten the oil bottle before use.
• Clean the machine with alcohol every 1-2 months.
• Do NOT modify, disassemble, or repair the machine. If any failure occurs, please contact technical personnel.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not tamper with any operating function of the machine.

Caution

• Shall not modify, disassemble, or repair the machine arbitrarily. Any failure happens, please contact a technician in time.
• Shall not damage the power cord, force to bend, yank, apply heavy load, clip, or reprocess it.
• Shall not use a damaged plug or one unmatched with the socket.
• Shall not wet the machine or the plug.
• Shall not use an overloaded power socket, wire, or broken plug.
• Shall not touch the wire or product shell during thundering or lightning.
• Shall not disassemble the machine when it is operating.

Troubleshooting

Before requesting repairs, please try to diagnose the problem using the following guide:

Equipment Cleaning

The machine needs cleaning when:

• You are changing to another kind of essential oil.
• The atomization volume becomes weak.

Cleaning Steps:

1. Pull out the atomized head.
2. Find a larger container and fill it with industrial alcohol. Soak the atomized head and the bottle for 5-10 minutes.
3. Allow the atomizer head and the bottle to dry.

ISED Statement (Canada)

English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).

French: Cet appareil contient des émetteurs/récepteurs exempts de licence qui sont conformes aux RSS exemptés de licence d'Innovation, Sciences et Développement économique Canada. L'exploitation est soumise aux deux conditions suivantes: (1) Cet appareil ne doit pas provoquer d'interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer un fonctionnement indésirable de l'appareil. L'appareil numérique est conforme aux normes canadiennes CAN ICES-3 (B)/NMB-3(B).

This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure. Users can obtain Canadian information on RF exposure and compliance. Cet appareil est conforme à l'exemption des limites d'évaluation courante dans la section 2.5 du CNR-102 et conformité avec RSS 102 de l'exposition aux RF, les utilisateurs peuvent obtenir des données canadiennes sur l'exposition aux champs RF et la conformité.

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme aux limites d'exposition aux rayonnements du Canada établies pour un environnement non contrôlé.

This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.

FCC Statement (USA)

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

RF Exposure: This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.