Be Cool Urban Walk

Introduction

This manual provides comprehensive instructions for the Be Cool Urban Walk stroller. Please read all instructions carefully before use to ensure safe and proper operation.

Specifications

Stroller Weight: 7.8 KG

Dimensions (Unfolded): Height: 105 cm, Width: 83 cm, Depth: 55 cm

Dimensions (Folded): Height: 58 cm, Width: 55 cm, Depth: 30 cm

Seat Height: 47 cm

Base Width: 39 cm

Weight Limits:

• Maximum Child Weight: 22 KG
• Maximum Basket Weight: 4 KG

Suitability:

• Children from 0-15 kg
• Children from 15-22 kg
• Age recommendations: 0-6 months and 6+ months for specific harness configurations.

Package Contents

Ensure all parts are present before assembly:

• Stroller Frame and Seat (x1)
• Rear Wheels (x2)
• Front Wheels (x2)
• Handlebar (x1)
• Instruction Manual (x1)
• Warnings Booklet (x1)

Assembly and Initial Setup

1. Unfolding the Stroller: Release any locks and pull the stroller frame upwards until it is fully open.
2. Attaching the Handlebar: Insert the handlebar into the designated slots on the stroller frame until it clicks securely into place.
3. Attaching Front Wheels: Align the front wheel assemblies with the front fork mounts and push firmly until they click.
4. Attaching Rear Wheels: Align the rear wheel assemblies with the rear axle mounts and push firmly until they click.
5. Securing Components: Ensure all wheels and the handlebar are securely attached. Check for any release buttons or locking mechanisms.
6. Final Check: Verify that the stroller is stable and all parts are correctly assembled.

Safety Note: Always perform a safety check after assembly. ⚠️⚙️✅

Operation: Brakes and Wheels

Engaging the Brake: To stop the stroller, press down firmly on the brake pedal located near the rear wheels. The pedal will indicate 'STOP' ? when engaged. Always ensure the brake is fully engaged before leaving the stroller unattended.

Disengaging the Brake: Lift the brake pedal to release the brakes and allow the stroller to move.

Front Wheel Lock: The front wheels can swivel for maneuverability or be locked to move in a straight line. To lock, turn the designated lever on the wheel assembly. To unlock, return the lever to its original position. ?/?

Safety Check: Regularly check that the brakes and wheel locks are functioning correctly. ⚠️ CHECK ?️

Safety Harness

The stroller is equipped with a 5-point safety harness to secure your child.

Adjusting the Harness:

1. Connecting Buckles: Insert the shoulder strap buckles (A) into the central harness buckle (B) until they click.
2. Strap Adjustment: Adjust the length of the shoulder straps (C, D) and waist straps to ensure a snug but comfortable fit for your child. The harness should be at the correct height relative to the child's shoulders.
3. Buckle Release: Press the central buckle (B) to release the harness.

Harness Fitting: Ensure the harness is correctly fitted. The shoulder straps should be at or slightly above the child's shoulders for infants 0-6 months, and at or slightly below for older children. The harness should be snug, with no slack. ❌ Incorrect fitting can be dangerous. ⚠️

Visual Check: Always visually inspect the harness before each use. ✅

Canopy and Seat Adjustments

Canopy: The canopy can be extended or retracted to provide shade. Follow the arrows to adjust its position. It attaches securely to the stroller frame.

Seat Recline: The seat can be adjusted to different recline positions for your child's comfort.

Folding and Unfolding

To Fold:

1. Ensure the brake is engaged. ?
2. Locate the folding mechanism, often involving release buttons or levers (A, B).
3. Press the release buttons and guide the stroller frame to fold it into a compact position.

To Unfold: Reverse the folding process, pulling the stroller frame open until it locks securely. Ensure it is stable before use.

Important: Always ensure the stroller is fully locked open before placing a child in it. ⚠️

Care and Maintenance

Cleaning:

• Wipe the frame and fabric with a damp cloth.
• Use mild soap and water for cleaning.
• Do not use abrasive cleaners or harsh chemicals.

Care Symbols: Do not bleach, Do not tumble dry, Do not iron, Do not dry clean. ?

Maintenance: Regularly inspect the stroller for wear and tear. Check that all mechanisms, brakes, and locks are functioning correctly. Periodic maintenance is recommended. ?⏰

Safety Warning: Keep a distance of 1 meter from other people when using the stroller. ?↔️ 1m ?️

Manufacturer Information

Manufacturer: JANÉ, S.A.

Address: Pol. Industrial Riera de Caldes, C/Mercaders, 34 – 08184 Palau Solità i Plegamans (BARCELONA) SPAIN

Telephone: +34 93 703 18 00

Email: info@babybecool.es

Website: www.babybecool.es

Follow us on social media:

• Facebook
• Instagram
• YouTube

Model Number: IM-2612,00