Peiko Translator TR-box01 Quick Start Guide

Introduction

Thank you for choosing the Peiko Translator TR-box01. This product is a powerful translation device designed to help you communicate more effectively in a foreign language. Simply connect the Tr-box to your mobile phone and set the translation mode and language via the Byteengine Translator APP to begin using your Peiko Trbox translator.

This guide introduces the hardware specifications of the translator. For specific usage of the translation function, please refer to the other manual provided with the translator.

Product Overview

The Peiko Translator TR-box01 is a compact and intelligent device that facilitates real-time translation. It features a user-friendly interface with dedicated buttons for translation, volume control, and power/mode selection.

Device Layout:

• Speaker Grille: Located at the top.
• Translation Indicator Lights: Near the speaker grille.
• Microphone (Mic): ? Located below the indicator lights.
• 'Me' Button (Translate in your native language): A prominent button, often labeled 'Me', used to translate into your native language.
• Target Language Translate Button: A button used to translate into your target language.
• Volume Up: ? Button to increase volume.
• Volume Down: ? Button to decrease volume.
• Connection Status Indicator: A light indicating the connection status.
• PEIKO Logo: Brand logo.

The device is designed for portability and ease of use, fitting comfortably in your hand.

Translator Specifications

• Bluetooth Version: 5.2
• Transmission Range: 33 Feet (10m)
• Battery: 500mAh LiPolymer DC 5V
• Charge Time: Approx. 2 Hours
• Usage Time: Up to 24 Hours (Active) / 55 Hours (Standby)

Connection Status Indicator

The connection indicator is crucial for confirming the device's operational status:

• No Light: The unit is off.
• Fast Flash Green: The Byteengine Translator app is not connected, and the translation function is not ready.
• Solid Green Light: The Byteengine Translator app is connected and ready for translation.

A solid green light indicates that the Trbox01 has successfully established an automatic connection with the Byteengine Translator app after selecting the translation mode and running the app in the background.

Checking Battery Level

To check the current battery level:

1. Long press the Volume + button.

The indicator lights will show the battery status:

• Green Light: 75% of the battery
• Yellow Light: 50% of the battery
• Red Light: 25% of the battery

Connecting Bluetooth Device

To connect your Peiko Translator TR-box01 to your mobile phone:

1. Go to your phone's Bluetooth settings and select 'Available Devices'.
2. Look for 'Tr box01' in the list. Note: Do not select the 'UISLW' Bluetooth option.
3. If 'Tr box01' is not found, tap 'Scan' to search for Bluetooth devices again.
4. Tap on 'Tr box01' in the list to connect your device. Your device should now be connected.

After connection, 'Tr box01' will appear under 'Paired Devices'.

The 'UISLW' Bluetooth link does not require manual connection; it will automatically establish a connection with the Byteengine Translator APP.

To use the translator:

1. Download the Byteengine Translator APP from Google Play or the App Store.
2. Open the APP and wait for it to automatically connect with the Trbox.
3. Once connected, select your desired translation mode and language within the app.

For detailed instructions on using the translation function, please refer to the attached manual.

Product Warranty

Your new Peiko devices come with a one-year limited warranty. Peiko Science and Technology Co.Ltd will repair or replace this product if, due to defective parts, it does not perform as specified. This warranty covers only repair or replacement of the product itself. This warranty is extended to the original consumer only. In no event does this warranty extend to instances where the product is damaged through uses for which it is not intended, misuse, mishandling, removal and/or reinstallation, neglect, accident, or tampering. In no event shall Peiko Science and Technology Co.Ltd. be liable for any indirect, incidental, or consequential damages, or loss of profits arising out of or related to this product, or the performance or breach thereof, even if Peiko Science and Technology Co.Ltd has been advised of the possibility thereof. Peiko Science and Technology Co.Ltd's refund for customers, if any, shall in no event exceed the total purchase price of the item. Some states do not permit the exclusion or limitation of incidental or consequential damages; therefore, sections of the above limitations or exclusions may not apply to you. This warranty is in lieu of any other warranty, expressed or implied, including, but not limited to, any warranty of merchantability or fitness for any particular purpose. Any representations or promises inconsistent, or in addition to this warranty are unauthorized and shall not be binding on Peiko Science and Technology Co.Ltd.

FCC Compliance Information

FCC Warning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.