Parkside Electric Precision Screwdriver PEPS 3 A1

Introduction

Congratulations on the purchase of your new tool. You have selected a high-quality product. The operating instructions are part of this product and contain important information about safety, usage, and disposal. Please familiarise yourself with all operating and safety instructions before using the product. Use the product only as described and for the specified range of applications. Please also pass these operating instructions on to any future owner.

Intended Use

This electrical precision screwdriver is intended for tightening and loosening screws during delicate repair work, such as on spectacles, watches, and smartphones. Use the electrical precision screwdriver only as described and for the specified range of applications. It is not intended for commercial/industrial use. Any other use or modification of the appliance is deemed improper and carries a significant risk of accidents. The manufacturer accepts no responsibility for damage attributable to misuse.

Features

• 1 Cap
• 2 Electric precision screwdriver
• 3 Rotation direction switch: left ▼
• 4 Rotation direction switch: right ▲
• 5 LED work light
• 6 Tool holder
• 7 Bits

Product Diagram

The electric precision screwdriver features a main body (2) with a cap (1) at one end, which likely houses the batteries. It has a rotation direction switch with indicators for left (▼) (3) and right (▲) (4). An LED work light (5) is positioned near the tip. The tool holder (6) is where the bits (7) are inserted.

Package Contents

• 1 electric precision screwdriver
• 20 bits: PH000, PH0, PH1, PZ0, PZ1, SL1.0, SL2.0, SL3.0, T5, T6, T8, P2, P5, P6, H2.5, H3, SQ0, Triangle 3.0, Y2.5, U3.0
• 2 x 1.5 V (DC) batteries, LR3, AAA (alkaline TRONIC)
• 1 operating manual

Technical Specifications

General Power Tool Safety Warnings

Work Area Safety

Keep your work area clean and well lit. Avoid cluttered or dark areas. Do not operate power tools in explosive atmospheres (presence of flammable liquids, gases, or dust) as sparks can ignite dust or fumes. Keep children and bystanders away to maintain focus.

Electrical Safety

Ensure power tool plugs match the outlet; never modify plugs. Avoid body contact with earthed surfaces. Keep tools away from rain or wet conditions. Do not abuse the cord; keep it away from heat, oil, sharp edges, or moving parts. Use outdoor-suitable extension cords when working outdoors. Use an RCD-protected supply in damp locations.

Personal Safety

Stay alert, use common sense, and do not operate when tired or under the influence of drugs, alcohol, or medication. Always wear eye protection and other appropriate personal protective equipment (dust mask, safety shoes, hard hat, hearing protection). Prevent unintentional starting by ensuring the switch is off before connecting to power or battery. Remove any adjusting key or wrench before turning the tool on. Maintain proper footing and balance. Dress properly; avoid loose clothing or jewellery. Keep hair and clothing away from moving parts. Use dust extraction facilities if provided. Do not become complacent; careless actions can lead to severe injury.

Safety Instructions for Screwdrivers

Hold the power tool by the insulated gripping surfaces when performing operations where a screw might contact hidden power lines. Contact with a live wire can energize exposed metal parts and cause electric shock.

Safety Instructions for Batteries

• Never attempt to charge non-rechargeable batteries.
• Do not mix different types of batteries or new and used batteries.
• Insert batteries with the correct polarity.
• Always remove dead batteries from the appliance.

Before Use

Removing/Inserting Batteries

Open the cap (1) by turning it counter-clockwise. Ensure batteries are inserted with the correct polarity (indicated on the cap). Close the cap (1) by turning it clockwise.

Inserting Bits

Insertion: Insert an appropriate bit (7) into the tool holder (6).

Removal: Pull the bit (7) out of the tool holder (6).

Using the Appliance

Switching On/Off

Switching On: Press and hold either the rotation direction switch (3 or 4). The LED work light (5) will illuminate the work area.

Switching Off: Release the rotation direction switch (3 or 4). The LED work light (5) will turn off.

Note

You can exert more force on the screw by tightening or loosening by hand.

Maintenance, Storage and Cleaning

Maintenance

The appliance is maintenance-free.

Cleaning

WARNING! Remove batteries before cleaning. Never immerse the appliance in water or other liquids. Keep the appliance clean, dry, and free from oil or grease. Never permit liquids to enter inside the appliance. Use a soft, dry cloth to clean the housing; never use petrol, solvents, or cleansers that can damage plastic. Remove attachments before cleaning and clean them with a dry cloth.

Storage

Always ensure the appliance and attachments are clean, dust-free, and dry before storing.

Disposal

Product Disposal

Do not dispose of power tools in your normal domestic waste. This appliance is subject to Directive 2012/19/EU. Dispose of it at specially set up collection locations, recycling depots, or disposal companies. Disposal is free of charge for the user. Protect the environment and dispose of this appliance properly. Consult local authorities for disposal information.

Battery Disposal

Do not dispose of batteries in domestic waste. Recycle defective or worn-out batteries according to Directive 2006/66/EC. Treat batteries as hazardous waste and dispose of them in an environmentally sound manner. Return only fully discharged batteries.

Packaging Disposal

Packaging materials are selected for environmental friendliness and recyclability. Dispose of packaging materials according to applicable local regulations.

Warranty

Kompernass Handels GmbH provides a 3-year warranty from the date of purchase. This warranty covers material or manufacturing faults. It does not cover normal wear and tear, fragile parts, damage from misuse, improper maintenance, commercial use, or customer modifications. Keep your receipt as proof of purchase. For warranty claims, contact the service department with the defective appliance, proof of purchase, and a description of the fault.

Service

For service in Great Britain, call 0800 051 8970. For service in Cyprus, call 8009 4242. Contact forms are available on parkside-diy.com. The importer's address is KOMPERNASS HANDELS GMBH, BURGSTRASSE 21, 44867 BOCHUM, GERMANY. Please note this is not the service address.

Original Declaration of Conformity

KOMPERNASS HANDELS GMBH declares that this product complies with Directive 2006/42/EC (Machinery), 2014/30/EU (Electromagnetic Compatibility), and 2011/65/EU (RoHS). Applied harmonised standards include EN 62841-1:2015, EN 62841-2-2:2014, EN IEC 55014-1:2021, EN IEC 55014-2:2021, and EN IEC 63000:2018. Product designation: Electric Precision Screwdriver PEPS 3 A1. Year of manufacture: 04–2024. Serial number: 447863_2401.

Further information and manuals are available at parkside-diy.com.