PARKSIDE 2-SPEED CORDED POWER DRILL PNS 300 A1

Introduction

Congratulations on purchasing this high-quality Parkside 2-Speed Corded Power Drill PNS 300 A1. This manual contains essential information regarding safety, usage, and disposal. Please read and familiarize yourself with all operating and safety instructions before use. Use the product only as described and for the specified applications. Pass these instructions on to any future owner.

Intended Use

This appliance is designed for screwing and unscrewing screws, and for drilling into wood, metal, and plastics. It is intended for private use only and not for commercial purposes. Any other use or modification is considered improper and carries a significant risk of accidents. The manufacturer is not liable for damage caused by misuse.

Features

• 1 Speed selector switch ⚙️
• 2 Cover for carbon brushes
• 3 Rotation direction switch/lock ?
• 4 Locking button
• 5 ON/OFF switch / speed control
• 6 Torque selection ring
• 7 Bit holder ?
• 8 Chuck ring
• 9 Chuck ?️
• 10 Bit ?

Package Contents

• 1 x 2-speed corded power drill
• 1 x 50 mm bit ?
• 1 x Set of operating instructions

Technical Data

⚠️ Wear hearing protection! ?

Safety Instructions

General Power Tool Safety Warnings

Work Area Safety: Keep your work area clean and well-lit. Avoid explosive atmospheres. Keep children and bystanders away.

Electrical Safety: Ensure plugs match outlets. Do not use adapter plugs with earthed tools. Avoid contact with earthed surfaces. Keep tools away from rain/wet conditions. Handle cords with care. Use outdoor-suitable extension cords. Use an RCD for damp locations.

Personal Safety: Stay alert and use common sense. Do not use when tired or under the influence of drugs, alcohol, or medication. Wear appropriate Personal Protective Equipment (PPE), including eye protection ?, dust mask ?, non-skid safety shoes, hard hat, or hearing protection ?. Prevent unintentional starting by ensuring the switch is off before connecting to power or handling the tool. Remove adjustment keys or wrenches before starting. Maintain proper footing and balance. Dress appropriately; avoid loose clothing, jewellery, or long hair that could get caught in moving parts. Ensure dust extraction facilities are connected and used correctly.

Power Tool Use and Care: Do not force the tool; use the correct tool for the application. Do not use tools with faulty switches. Disconnect from power source before making adjustments, changing accessories, or storing. Store idle tools out of children's reach. Maintain tools; check for misalignment or damage and have them repaired before use. Keep cutting tools sharp and clean. Use tools, accessories, and bits according to instructions, considering working conditions.

Appliance-Specific Safety Instructions

⚠️ Toxic Dusts: Working with the tool can produce harmful/toxic dusts, posing a health hazard. ? Wear a dust mask.

⚠️ Power Cables & Lines: Ensure you do not contact power, gas, or water supply lines when working. Use a service line detector if necessary before drilling into surfaces.

Residual Risks: Even with proper operation, residual risks exist:

• Lung damage if no suitable dust protection mask is worn. ?
• Hearing damage if no suitable hearing protection is worn. ?
• Health damage from hand-arm vibrations if used for extended periods or not properly maintained.

⚠️ Electromagnetic Field: This power tool generates an electromagnetic field that may affect active or passive medical implants. Consult your doctor and the implant manufacturer before operating if you have medical implants.

Original Accessories/Auxiliary Equipment: Only use accessories and additional equipment specified in the operating instructions and compatible with the appliance.

Before Use

Changing Tools

Your appliance features a fully automatic spindle lock. When the motor is stopped, the drive train locks, allowing the chuck to be opened by turning. After inserting and tightening the desired tool by turning the chuck, you can continue working. The spindle lock automatically releases when the motor starts (by pressing the ON/OFF switch ).

Torque Preselection/Selecting the Operating Mode

You can adjust the torque using the torque selection ring and select the drill setting . Select a low setting for small screws or soft materials. Select a high setting for large screws, hard materials, or for removing screws. For drilling work, select the drill setting by adjusting the torque selection ring to the position .

2-Speed Gearbox

⚠️ CAUTION: Operate the speed selector switch ⚙️ only when the appliance is stationary. Otherwise, the appliance could be damaged.

• 1st Gear (Speed selector switch ⚙️ position 1): Provides a speed of approx. 400 rpm and high torque, suitable for all screwing jobs.
• 2nd Gear (Speed selector switch ⚙️ position 2): Provides a speed of approx. 1600 rpm for drilling work.

Removing the Chuck

To use the bit holder ?, you must remove the chuck ?️. Hold the chuck firmly from the front. Pull/push the chuck ring in the direction of the chuck. The chuck is now unlocked and can be removed forward. To attach the quick-release chuck, pull the chuck ring towards it and push the chuck fully on. If the chuck does not automatically click into place, turn the chuck ring.

Use

Switching On and Off

• Switching On: Press the ON/OFF switch .
• Switching Off: Release the ON/OFF switch .
• Continuous Operation: Press and hold the ON/OFF switch , then lock it in the pressed position with the locking button .
• Switching Off Continuous Operation: Press the ON/OFF switch again.

Adjusting Rotational Speed

Light pressure on the ON/OFF switch provides low speed. Increasing pressure increases the speed.

Changing Direction of Rotation

⚠️ WARNING: The rotation direction switch ? may only be used/adjusted when the appliance is stationary. Change the direction of rotation by pressing the switch towards the left or right.

Activate Lock

Push the rotation direction switch ? to the middle position. The ON/OFF switch is then blocked.

Maintenance and Cleaning

⚠️ WARNING! RISK OF INJURY! Switch the appliance off and remove the power plug before starting any work.

The appliance is maintenance-free.

• Keep the appliance clean, dry, and free from oil or grease.
• Never allow liquids to get into the appliance.
• Use a soft, dry cloth to clean the housing. Never use petrol, solvents, or cleansers that can damage plastic.

⚠️ Cable Replacement: If the connecting cable needs to be replaced, this must be carried out by the manufacturer or an authorized representative to avoid safety hazards.

Note: Spare parts not listed (e.g., carbon brushes, switches) can be ordered via our service hotline. Have carbon brushes replaced by the manufacturer, Customer Service, or a similarly qualified person.

Warranty

Kompernass Handels GmbH Warranty

This appliance comes with a 3-year warranty from the date of purchase. Your statutory rights as a buyer are not affected. The warranty covers material or production faults within three years. Proof of purchase (receipt) and a brief description of the fault are required. Repair or replacement does not extend the warranty period.

Warranty Scope: The warranty covers material or production faults. It does not cover normal wear and tear, fragile parts, or damage due to misuse, improper handling, or unauthorized repairs. The product is for private use only.

Warranty Claim Procedure

To ensure quick processing, have your receipt and item number (e.g., IAN 12345) ready. Contact the service department by telephone or e-mail for any functional defects. Return defective products, along with proof of purchase and a description of the fault, to the provided service address.

Download manuals, product videos, and software at www.lidl-service.com.

Service

⚠️ WARNING: Have the power tool repaired by the service centre or a qualified electrician using only genuine replacement parts. Ensure power plug or mains cable replacement is performed by the manufacturer or an approved customer service provider to maintain safety.

Contact Information

• Great Britain: Tel: 0800 404 7657, E-Mail: kompernass@lidl.co.uk
• Ireland: Tel: 1890 930 034, E-Mail: kompernass@lidl.ie

Importer

Please note that the following address is not the service address. Contact the designated service centre first.

KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE - 44867 BOCHUM
GERMANY
www.kompernass.com

Disposal

Packaging is made from environmentally friendly materials and can be disposed of at your local recycling plant. ♻️

Do not dispose of power tools in your normal domestic waste! ❌

In accordance with European Directive 2012/19/EU, worn-out power tools must be collected separately and recycled in an environmentally compatible manner. Contact your local community or municipal authorities for disposal information.

Dispose of packaging environmentally. Note the labelling on the packaging and separate materials if necessary. Packaging materials are labelled with abbreviations (a) and numbers (b): 1-7: plastics, 20-22: paper and cardboard, 80-98: composites.

Original Conformity Declaration

KOMPERNASS HANDELS GMBH declares that this product complies with the Machinery Directive (2006/42/EC), Electromagnetic Compatibility (2014/30/EU), and RoHS Directive (2011/65/EU). The manufacturer bears full responsibility for this declaration.

Applied harmonised standards are listed.

Type/appliance designation: 2-speed corded power drill PNS 300 A1

Year of manufacture: 12-2018

Serial number: IAN 315566

Date: Bochum, 08/01/2019

CE Mark: ✅

Signed by: Semi Uguzlu, Quality Manager. Technical changes in the interest of further development are reserved.