Cardo SPIRIT / SPIRIT HD Installation Guide

Installation Video

Watch the installation video for a visual guide:

• Installationsvideo
• Vidéo d'installation
• Video d'installazione
• Video de instalación
• インストール動画
• 安装视频

Contents

• A: Velcro (x2)
• B: Velcro (x2)
• C: Booster Pads (x2)
• D: Speaker
• E: Microphone
• F: Short cord speaker cable (L)
• G: Mounting Unit
• H: Alcohol Pad
• I: Clamp Mount
• J: Cardo Spirit Unit

Product Information

The FREECOM/SPIRIT Half helmet kit is sold separately.

Helmet Types

This guide covers installation for different helmet types:

• Open face helmets
• Full face helmets
• Narrow rim helmets
• Wide rim helmets

Option 1: Open Face Helmet Installation

1. Attach Velcro pads (A) inside the helmet.
2. Position the microphone (E) using the Velcro pads. Ensure the microphone arrow faces the mouth.

Option 1: Installation on Narrow Rim Helmet

1. Push the clamp (G) into place on the helmet rim (less than 5mm).
2. Connect the unit (J) to the clamp.

Option 2: Full Face Helmet Installation

1. Attach the clamp mount (I) to the helmet.
2. Connect the unit (J) to the clamp.

Option 2: Installation on Wide Rim Helmet

1. Clean the helmet surface with an alcohol pad (H).
2. Attach the clamp mount (I) to the helmet. Allow 4 hours for adhesive to set.
3. Remove the clamp.
4. Attach the unit (J) to the clamp.

Speaker Installation

1. Remove padding from the helmet if necessary.
2. Connect the speakers (D) to the unit using the short cord (F).
3. Place the speakers inside the helmet, ensuring the Left (L) speaker is on the left and the Right (R) speaker is on the right.
4. Reinstall padding.

Booster Pads

If needed, use booster pads (C) to place speakers closer to your ear.

1. Place booster pads (C) and speakers (A, D) inside the helmet.

Final Unit Attachment

1. Attach the main unit (J) to the mounting clamp.
2. Ensure it clicks into place.