Birdfy Feeder Series User Manual

Introduction

This manual provides instructions for the Birdfy Feeder Series, a smart bird feeder with an integrated camera designed to help you observe and record bird activity.

What's in the Box

• User Manual
• Quick Start Guide
• Roof
• Feeder + camera unit
• Antenna
• Thumbscrews (x2)
• Mounting bracket
• Drilling template
• Black strap
• Hose clips (x2)
• Charging cable
• Perch
• Hanging bracket

About the Product

The Birdfy Feeder Series includes the following components:

• 1. Roof: Protects the feeder from weather.
• 2. Bird seed bin: Holds birdseed.
• 3. Camera: For capturing bird activity.
• 4. Status light: Indicates device status (e.g., charging, Wi-Fi connection).
• 5. Power button: To turn the device on/off.
• 6. Charging port: For charging the device via USB.
• 7. Reset hole: For resetting the device to factory settings.
• 8. MicroSD card slot: For storing recordings. (MicroSD card not included in the package).
• 9. Perch: A place for birds to land.
• 10. Antenna: For wireless connectivity (Wi-Fi).

Charging

Fully charge the camera before use. The camera is not fully charged upon arrival due to safety regulations. Please charge it for 10 hours with the included charging cable (DC5V / 1.5A) before using it for the first time.

Temperature Requirements: During charging, both the ambient temperature and camera temperature should be above 32°F (0°C). If the camera has been exposed to low temperatures for an extended period, it should be brought back to room temperature before charging.

Status Light Indicators:

Downloading and Setting Up the Birdfy App

Download the Birdfy app from the App Store or Google Play. Follow the in-app instructions to set up your Birdfy device.

Pairing:

Pair your Birdfy device with the app.

Bird Identification:

If your Birdfy Feeder includes Lifetime Free AI, the AI bird identification feature is included and activated automatically, with no further action needed. If your feeder uses AI by Subscription, you need to subscribe on my.birdfy.com to access this feature.

Assembly

Step 1: Attach the roof

Attach the roof to the feeder body. You should hear a click. [? Click sound indicator]

Step 2: Install the perch

For standard Birdfy Feeder: Install the perch with the provided thumbscrew.

For Birdfy Feeder with Perch Pro: Install the Perch Pro with the provided thumbscrew.

Step 3: Attach the Hummee (if applicable)

Attach the Hummee to the feeder body.

Outdoor Installation

A. Pole-mounted

1. Loosen the hose clip.
2. Wrap the hose clip around the hanging bracket.
3. Attach the hanging bracket to the pole.
4. Secure the feeder on the mounting bracket with the provided thumbscrew, then hang the feeder onto the pole.

B. Tree-mounted

1. Slide the strap through the hanging bracket slots.
2. Wrap the strap around the tree.
3. Secure the feeder on the mounting bracket with the provided thumbscrew, then hang the feeder onto the tree.

C. Wall-mounted

1. Use the drill template and an electric drill (15/64", 6mm) to drill two holes.
2. Drive the provided plastic anchors into the holes. Skip this step if you are mounting on wood. Next, fasten the hanging bracket on the wall using the screws.
3. Secure the feeder on the mounting bracket with the provided thumbscrew, then hang the feeder onto the wall.

Adding Birdseed

Open the roof and pour birdseed into the bird seed bin.

Cleaning

Follow these steps for cleaning:

1. Disconnect the charging cable.
2. Remove the roof.
3. Remove the perch.
4. Disassemble the feeder base.
5. Clean all parts with mild soap and water.
6. Rinse thoroughly and allow to dry completely before reassembly.

The Birdfy Community

Join the Birdfy Facebook community to connect with fellow bird enthusiasts. Discover valuable insights on birdwatching and bird feeding techniques, exchange your finest Birdfy captures, and witness exotic birds from around the world!

Follow us on social media: Facebook, X (formerly Twitter), Instagram, TikTok, YouTube. Find us at @birdfy by netvue.

Warnings and Compliance

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications made without explicit approval from the responsible party in compliance may result in the user being unauthorized to operate the device.

This device meets the FCC radiation exposure limits for uncontrolled environments. To ensure safe installation and operation, maintain a minimum distance of 20cm between the radiator and your body.

FCC ID: 2AO8RNI-8141 (Birdfy Feeder)

CE Statement

The information provided on the packaging is allowed to identify geographical areas within the member states where restrictions on use or requirements for authorized use exist, if applicable. The structure of the product allows it to be used in at least one member state without violating applicable requirements for the use of radio spectrum.

IC Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Antenna Information

Battery Warning

Contains batteries, keep away from fire. [? Fire symbol]

Contact Information

Manufacturer: NETVUE INC.

Address: 1055 East Colorado Boulevard 5th Floor, Pasadena, CA, 91106

Support Email: support@birdfy.com

Phone: +1(866)749-0567 (Mon-Fri, 9am-5pm, PST)

Website: www.birdfy.com

In-App Chat is also available.

© Netvue Inc.