inSPORTline Plicona Accumulator Pump

Safety Instructions

• Please read the manual before use and keep it for future reference.
• Keep out of reach of children and animals.
• Do not use in direct sunlight, high temperatures or high pressure.
• Keep away from water; do not submerge.
• After 10 minutes of continuous operation, switch off the pump and let it cool down for at least 30 minutes.
• Turn off after use.
• Keep away from open fire and flames.
• Store in a dry, shady and well-ventilated place.

Parameters

Product Description

The inSPORTline Plicona accumulator pump features a main body containing the display and controls, connected to an air hose. It includes a heat-resistant valve, a power switch, a digital display, various buttons for operation, an LED light, and a USB charging port.

Components:

• 1. Air hose: A flexible tube for inflating.
• 2. Heat-resistant valve: The connection point for the air hose.
• 3. Switch: The main power button.
• 4. Display: Shows pressure, units, and battery status.
• 5. Buttons: Controls for adjusting pressure, changing units, and starting/stopping inflation.
• 6. LED light: An integrated light for visibility.
• 7. USB charging port: For recharging the device.

Accessories

• USB charging cable
• Valves (various types)

Usage Guide

1. Connect the hose: Attach the air hose to the pump's designated port.
2. Connect to valve: Screw the other end of the hose onto the valve of the object to be inflated (e.g., tire, ball).
3. Switch on: Turn on the device using the power switch.
4. Activate settings: Press the "M" button to activate the display and settings.
5. Change units: Press and hold the "M" button to cycle through and select desired pressure units (PSI, bar, KPA, kg/cm²).
6. Select mode: Optionally, choose a pre-set mode for specific applications like cars, motorcycles, bicycles, or balls by pressing the "M" button.
7. Set target pressure: Use the "+" and "-" buttons to adjust the desired target pressure. Wait for the displayed value to stop flashing.
8. Start inflating: Press the "M" button to begin the inflation process.
9. Automatic stop: The device automatically stops inflating once the target pressure is reached. You can also press the "M" button again to stop inflation manually. After automatic shutdown, ensure the device is turned off.

Modes

The pump offers pre-set modes for different applications:

• Car
• Motorcycles
• Bicycles
• Balls

Display Description

Use the "+" and "–" buttons to adjust the target pressure. Wait until the set value stops flashing and then press "M". The device will start to inflate. After reaching the pressure, the device switches off automatically. If necessary, you can press the "M" button again and the device will stop inflating.

Display Elements:

• 1. Pressure: Displays the current or target pressure.
• 2. Units: Shows the selected pressure unit (PSI, bar, etc.).
• 3. Increase: Button to increase the target pressure.
• 4. LED light: Indicator for the LED light status.
• 5. Mode: Displays the currently selected mode.
• 6. Battery status: Indicates the remaining battery level.
• 7. Decrease: Button to decrease the target pressure.
• 8. Change of mode: Button to cycle through different modes.
• 9. Start / change unit display / shutdown: The main button for starting inflation, changing units, or shutting down the device.

Environmental Protection

After the product's lifespan expires or if repair is uneconomical, dispose of it according to local laws and in an environmentally friendly manner at the nearest scrapyard. Proper disposal helps protect the environment, natural resources, and human health. If unsure about correct disposal, consult local authorities to avoid legal violations or sanctions.

Do not dispose of batteries with household waste; hand them in at a designated recycling point.

Terms and Conditions of Warranty, Warranty Claims

General Conditions of Warranty and Definition of Terms

All Warranty Conditions stated herein determine Warranty Coverage and Warranty Claim Procedure. Conditions of Warranty and Warranty Claims are governed by Act No. 89/2012 Coll. Civil Code, and Act No. 634/1992 Coll., Consumer Protection, as amended, including cases not specified by these Warranty rules.

The seller is SEVEN SPORT s.r.o., with its registered office at Strakonická 1151/2c, Prague 150 00, Czech Republic. Company Registration Number: 26847264, registered in the Trade Register at the Regional Court in Prague, Section C, Insert No. 116888.

The applicability of these regulations depends on whether the Buyer is the End Customer or not. An "End Customer" is a legal entity that does not conclude and execute the Contract for the purpose of running or promoting its own trade or business activities. A "Buyer who is not the End Customer" is a Businessman who buys Goods or uses services for their own business activities. Such a Buyer conforms to the General Purchase Agreement and business conditions.

These Conditions of Warranty and Warranty Claims are an integral part of every Purchase Agreement made between the Seller and the Buyer. All Warranty Conditions are valid and binding, unless otherwise specified in the Purchase Agreement, an Amendment to this Contract, or another written agreement.

Warranty Period

The Seller provides the Buyer a 24-month Warranty for Goods Quality, unless otherwise specified in the Certificate of Warranty, Invoice, Bill of Delivery, or other related documents. The legal warranty period provided to the Consumer is not affected.

By the Warranty for Goods Quality, the Seller guarantees that the delivered Goods shall be suitable for regular or contracted use for a certain period of time, and that the Goods shall maintain its regular or contracted features.

Batteries

6-month battery warranty: We guarantee that the battery's nominal capacity does not fall below 70% of its total capacity within 6 months of the product's sale.

The Warranty does not cover defects resulting from (if applicable):

• User fault, i.e., product damage caused by unqualified repair work, improper assembly, insufficient insertion of seat post into frame, insufficient tightening of pedals and cranks.
• Improper maintenance.
• Mechanical damages.
• Regular use (e.g., wearing out of rubber and plastic parts, moving mechanisms, joints, wear of brake pads/blocks, chain, tires, cassette/multi wheel, etc.).
• Unavoidable event or natural disaster.
• Adjustments made by an unqualified person.
• Improper maintenance, improper placement, damages caused by low or high temperature, water, inappropriate pressure, shocks, intentional changes in design or construction, etc.

Warranty Claim Procedure

The Buyer is obliged to check the Goods delivered by the Seller immediately after taking responsibility for the Goods and its damages, i.e., immediately after delivery. The Buyer must check the Goods to discover all defects discoverable by such a check.

When making a Warranty Claim, the Buyer is obliged, upon request of the Seller, to prove the purchase and validity of the claim by the Invoice or Bill of Delivery that includes the product's serial number, or by documents without the serial number. If the Buyer does not prove the validity of the Warranty Claim by these documents, the Seller has the right to reject the Warranty Claim.

If the Buyer notifies a defect not covered by the Warranty (e.g., if Warranty Conditions were not fulfilled or if the defect was reported by mistake), the Seller is eligible to require compensation for all costs arising from the repair. The cost shall be calculated according to the valid price list of services and transport costs.

If the Seller finds out (by testing) that the product is not damaged, the Warranty Claim is not accepted. The Seller reserves the right to claim compensation for costs arising from a false Warranty Claim.

In case the Buyer makes a claim about the Goods that is legally covered by the Warranty provided by the Seller, the Seller shall fix the reported defects by means of repair or by exchanging the damaged part or product for a new one. Based on the Buyer's agreement, the Seller has the right to exchange the defective Goods for a fully compatible Goods of the same or better technical characteristics. The Seller is entitled to choose the form of the Warranty Claim Procedures described in this paragraph.

The Seller shall settle the Warranty Claim within 30 days after the delivery of the defective Goods, unless a longer period has been agreed upon. The day when the repaired or exchanged Goods is handed over to the Buyer is considered the day of the Warranty Claim settlement. When the Seller is unable to settle the Warranty Claim within the agreed period due to the specific nature of the Goods defect, they and the Buyer shall agree on an alternative solution. If such an agreement is not made, the Seller is obliged to provide the Buyer with financial compensation in the form of a refund.

Company Information

CZ: SEVEN SPORT s.r.o.

Registered Office: Strakonická 1151/2c, Praha 5, 150 00, ČR

Headquarters: Dělnická 957, Vítkov, 749 01

Warranty & Service: Čermenská 486, Vítkov 749 01

CRN: 26847264

VAT ID: CZ26847264

Phone: +420 556 300 970

E-mail: eshop@insportline.cz, reklamace@insportline.cz, servis@insportline.cz

Web: www.inSPORTline.cz

SK: inSPORTline s.r.o.

Headquarters, warranty & service center: Električná 6471, Trenčín 911 01, SK

CRN: 36311723

VAT ID: SK2020177082

Phone: +421(0)326 526 701

E-mail: objednavky@insportline.sk, reklamacie@insportline.sk, servis@insportline.sk

Web: www.inSPORTline.sk

About shipping