Introduction
Use this guide if the battery of your Roomba 880 has stopped functioning, or is not working at complete capacity. This could be due to a faulty or damaged battery, overuse or exposure to heat and water. The battery is fairly easy to replace, so let's tackle this together.
Tools
- JIS Driver Set (1)
Step 1 — Battery
The underside of the iRobot Roomba 880 is shown with the wheels facing up. Two 15mm screws are visible, holding the battery cover in place.
Start with your Roomba upside down, with the wheels facing up.
Using a JIS driver in #1 size, remove the two 15mm screws holding the battery cover in place.
Step 2
The battery cover of the iRobot Roomba 880 is shown being removed and placed to the side.
Remove the battery cover and place it off to the side.
Step 3
Hands are shown pulling the blue iRobot Roomba 880 battery out of the robot using the green tabs on either side of the battery.
Remove the battery using the green tabs on either side of the battery.
To reassemble your device, follow these instructions in reverse order.
