GOOLOO GP3000 Jump Starter User Manual
Thank you for choosing GOOLOO jump starter. To ensure a good user experience, personal safety, and property security, please read all of the instructions carefully before using this product. Please keep this manual for easy reference.
Product Structure
Parts and Functional Description:
- Host: The main unit of the jump starter.
- Jumper Cable Socket: Port for connecting the smart jumper cable.
- Type-C Input/Output Port: For charging the unit and charging other devices.
- DC Output Port (15V/10A): For powering 12V devices.
- Quick Charge Output Port (5V/2.1A): For fast charging compatible devices.
- Power Switch: Turns the unit on/off and checks battery level.
- Battery Indicator: Shows the remaining battery power.
- LED Flashlight: Integrated flashlight with multiple modes.
- Smart Jumper Cable: Safety-enhanced jumper cables with indicator lights.
Technical Specifications
- Model No.: Epower-136
- Input: Type-C 15W (5V/3A)
- Output: Type-C 15W (5V/3A), Quick Charge (5V/2.4A, 9V/2A, 12V/1.5A), 5V/2.1A, 15V/10A
- Capacity: 59.2Wh
- Starting Current: 600A (3s)
- Peak Current: 3000A
- Size: 228 x 99.5 x 33mm
- Weight: 630g
- Operating Temp: -20°C to 60°C (-4°F to 140°F)
- Life Time: > 1000 cycles
- Full Charging Time: 5-6 Hours (5V/3A)
Package Content
- Host (1)
- Smart Jumper Cable (1)
- USB to Type-C Cable (1)
- Type-C to Type-C Cable (1)
- Cloth bag (1)
- User Manual (1)
Charging the GP3000
Charge It First!
While reading the manual, you can begin to charge your GP3000 with your mobile phone charger and the type-c cable attached. This unit can be charged with a type-c cable attached and a 5V wall charger (phone charger) or car charger. (Note: 5V wall charger and car charger are not included). Only via the QC3.0 wall charger or car charger can achieve the quick charge input function; QC3.0 wall charger and car charger can be purchased separately.
Battery Power Indicator:
Press the power switch to check the battery power. The indicator will blink one by one during charging. Different numbers of solid indicators show different battery power levels. All indicators will be turned off automatically when the charging process has finished.
Charging Levels:
- 1 Blinking: 0%
- 1 Solid: 25%
- 2 Solid: 50%
- 3 Solid: 75%
- 4 Solid: 100%
How to Start a Vehicle
Jump Starting for 12V Vehicles
- Ensure the unit is over 50% charged (check the battery indicator ≥ 2 bars). If this unit has not been used for more than two months, you should charge it first.
- Connect the blue connector of the intelligent battery clamp to the main unit, ensuring that the clamp's indicator light is off.
- Correctly connect the battery clamps to the positive and negative terminals of the car battery: red clamp to the positive terminal (+) and black clamp to the negative terminal (-).
- Follow the battery clamp's indicator light for the appropriate action:
- Solid Green Light: Indicates a correct connection and power supply. Proceed with the jump-start.
- Solid Red Light: Indicates incorrect polarity connection. Reconnect correctly, and proceed with the jump-start once the green light is solid.
- Flashing Green Light: Indicates a low battery voltage. Press the BOOST button, and proceed with the jump-start within 30 seconds once the green light is solid.
- No Red or Green Light: May indicate a completely damaged battery. Ensure correct connection, press the BOOST button, and proceed with the jump-start within 30 seconds once the green light is solid.
- Start the vehicle.
- Remove the jump starter from the vehicle battery within 30 seconds after the engine starts. Disconnect the clamps from the car battery.
How to Charge Your Phone or Tablet
- Plug the charging cable into the USB-A port and your devices.
- Press the power switch; the unit will automatically identify and charge your device. The battery indicators will light up during charging.
How To Turn On/Off The LED Flashlight
- Long press the power switch for 3 seconds to turn on the LED light.
- Press lightly to cycle through 3 lighting modes: Normal, Strobe, and SOS.
- Press the switch again to turn off the light.
Protection Mode
- Short Circuit / Overload Protection: If the 15V/10A DC port is short-circuited or overloaded (load power > 150W), the unit will shut off automatically for self-protection. Resolve the short circuit or overload issues and recharge the unit to reset from protection mode.
Troubleshooting
Problem | Cause | Remedy |
---|---|---|
No response when pressing the power switch. | Low voltage protection is activated. | Try charging the unit with a wall charger to activate it. |
It has charged for a long time, but the fourth battery indicator is still blinking. | Battery power recognition problem. | Disconnect the charging cable and plug it in again, try to continue charging for hours. |
This unit cannot be charged, the first battery indicator blinks all the time. | The unit is over-discharged or defective. | Please contact GOOLOO customer service at fiona@gooloo.com. |
This unit is overheated or swelled. | The unit is over-discharged or defective. | Please contact GOOLOO customer service at fiona@gooloo.com. |
FAQ
- Q1: What is the operating temperature of this unit and how to store it?
A: This unit is a lithium polymer battery, operating temperature is -20-60°C / -4-140°F. If the ambient temperature is higher than 60°C/140°F, the internal construction of the polymer lithium-ion cells will be damaged, it may swell and become unsafe. So don’t store the device in a vehicle parked in hot weather for long periods of time. - Q2: How to start a vehicle with this unit?
A: Please refer to the instructions about “How to Start a 12V Vehicle.” - Q3: How do you know if this unit is connected to the vehicle correctly?
A: With the battery clamps connected to the vehicle battery, when the indicator on the jumper cable shines a steady green light, it means it's connected correctly. If a red light is on and solid, it means it's a reverse connection. - Q4: What should I do if this unit can’t start a vehicle?
A: Recharge this unit fully, and try to press the “BOOST” button on the jumper cable, wait for the GREEN LIGHT to be solid, then start the vehicle within 30s. If it still does not work, contact GOOLOO at: fiona@gooloo.com (Attach your order ID). - Q5: What should I do if this unit can’t be charged?
A: Charge it with a USB-C cable and 5V wall charger to activate it. If it still does not work, contact GOOLOO at fiona@gooloo.com (Attach your order ID). - Q6: What should I do if this unit can’t charge other devices?
A: Try to use another charging cable to charge it again. If it can charge with another one, the charging cable attached is defective; contact GOOLOO, and they will provide a new one. If it still does not work, email GOOLOO at: fiona@gooloo.com (Attach your order ID). - Q7: How to turn off this unit?
A: The unit will be turned off automatically in 30 seconds when it has no load. - Q8: Can this unit charge other devices while it is being charged?
A: Yes. - Q9: Can this unit charge other devices while starting a vehicle?
A: No. - Q10: How often does this unit need to recharge?
A: It would be best to be recharged every 3 months. - Q11: Why it shuts off in 30s when charging for other devices?
A: This product may not be able to charge devices that need a weak current, like iPhone 6 series, headphones, smartwatches, etc. Because this unit has a minimum load current (200mA), it will automatically turn off after 30s if the load current is less than 200mA.
Warranty Information
Your Warranty Includes:
- 18 Months Limited Warranty Service: Within 18 months, GOOLOO will provide timely and effective online after-sales service after your purchase. We will replace the defective unit due to manufacturing issues with a new one within 18 months.
- 30 Days Money Back Guarantee: Within the first 30 days after your purchase, you can apply for a return through Amazon if you have any issues.
Warranty Terms:
- The warranty is valid upon presentation of the original receipt (Order ID) by the original purchaser with the product needing to be repaired or replaced.
- The warranty does not cover damage or product failure resulting from normal wear and tear, physical abuse, improper installation, misuse, modification, or repairs by unauthorized third parties.
- GOOLOO is not liable for any incidental or consequential damage that arises from incorrect use or misuse of this product.
- All warranty claims are limited to repair or replacement of the defective product at the sole discretion of GOOLOO.
Disclaimer & Attention
Disclaimer:
GOOLOO is not liable for any incidental or consequential damage that arises from incorrect use or misuse of this product.
Attention:
- Do Not Place Near or Into Fire ?
- Avoid Extreme Temperatures ?️
- Do Not Drop ❌
- Do Not Disassemble ?️
- Do Not Submerge In Water ?
Toxic and Harmful Substances:
Substance | Pb | Hg | Cd | Cr(VI) | PBB | PBDE |
---|---|---|---|---|---|---|
Content | 0 | 0 | 0 | 0 | 0 | 0 |
“0” indicates that the content of harmful substances in all homogeneous materials is lower than the prescribed limit of MCV (the standard 2002/95/EC/RoHs).
Customer Service
18 Months Limited Warranty Service
Lifetime Technical Service
Feel Free to Contact Us:
For FAQ and More Information:
- Website: www.gooloo.com
- Email (US): fiona@gooloo.com
- Email (EU): Support.eu@gooloo.com
- Phone: 1-888-886-1805 (Mon.-Fri. PST 9:00a.m.-5:00p.m.)
Made in China
Follow GOOLOO on social media:
- Facebook: @gooloofans
- Instagram: @GoolooOfficial